[Letux-kernel] module_mipi_dsi_driver panel with omapdrm?

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri Jul 24 03:24:11 CEST 2020


Hi Nikolaus,

On Thu, Jul 23, 2020 at 09:03:49AM +0200, H. Nikolaus Schaller wrote:
> > Am 08.07.2020 um 09:52 schrieb H. Nikolaus Schaller <hns at goldelico.com>:
> >> Am 07.07.2020 um 21:04 schrieb H. Nikolaus Schaller <hns at goldelico.com>:
> >> 
> >> And what I would need to know before I start to write new code is
> >> if is possible to operate a video mipi dsi panel with driver from
> >> gpu/drm/panel together with omapdrm (v5.7 and later).
> > 
> > I did a quick test on a 5.7.6 kernel with the sysc fixes as
> > suggested by Tony.
> > 
> > Then I overwrote the compatible entry of our display to be
> > orisetech,otm8009a and configured to build the otm8009a panel driver.
> > 
> > The panel driver is loaded, but not probed (no call to otm8009a_probe).
> > It is shown in /sys/bus/mipi-dsi/drivers (and lsmod) but not /sys/bus/mipi-dsi/devices.
> > 
> > So what should I try next?
> 
> Any suggestions if and how it is possible to use a gpu/drm/panel MIPI DSI
> video mode panel with omapdrm (on OMAP5)?

For the DSI panel to probe, the display driver needs to register a DSI
host with mipi_dsi_host_register(). omapdrm doesn't do so yet, we need
to integrate Sebastian's "[PATCHv2 00/56] drm/omap: Convert DSI code to
use drm_mipi_dsi and drm_panel" series first. I'll try to review it in
the near future.

> The problem is that our old omapdrm/display driver is broken since v5.7 and
> an experimental gpu/drm/panel driver does not probe. And I assume that
> omapdrm/display will disappear completely soon.

Not before Sebastian's series gets integrated.

-- 
Regards,

Laurent Pinchart


More information about the Letux-kernel mailing list