[Letux-kernel] [PATCH v2 5/5] rtc: rtc-rc5t619: add ricoh rc5t619 RTC driver

Alexandre Belloni alexandre.belloni at bootlin.com
Thu Nov 28 11:57:51 CET 2019


Hello,

checkpatch.pl --strict complains about multiple blank lines and alignment.

On 31/10/2019 22:38:35+0100, Andreas Kemnade wrote:
> +static int rc5t619_rtc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
> +	struct rc5t619_rtc *rtc;
> +	uint8_t alarm_flag;
> +	unsigned int ctrl2;
> +	int err;
> +
> +	rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
> +	if (IS_ERR(rtc)) {
> +		err = PTR_ERR(rtc);
> +		return -ENOMEM;
> +	}
> +
> +	rtc->rn5t618 = rn5t618;
> +
> +	dev_set_drvdata(dev, rtc);
> +	rtc->irq = -1;
> +
> +	if (rn5t618->irq_data)
> +		rtc->irq = regmap_irq_get_virq(rn5t618->irq_data,
> +				RN5T618_IRQ_RTC);
> +
> +	if (rtc->irq  < 0) {
> +		dev_err(dev, "no irq specified, wakeup is disabled\n");

I don't think it is worth having an error message here, especially since
you have a second one later.

> +		rtc->irq = -1;
> +	}
> +
> +	err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
> +	if (err < 0)
> +		return err;
> +
> +	/* get interrupt flag */
> +	err = rc5t619_rtc_alarm_is_enabled(dev, &alarm_flag);
> +	if (err)
> +		return err;
> +
> +	/* disable rtc periodic function */
> +	err = rc5t619_rtc_periodic_disable(&pdev->dev);
> +	if (err)
> +		return err;
> +
> +	/* disable interrupt */
> +	err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
> +	if (err)
> +		return err;

Is it really useful to disable the alarm to reenable them later?

> +
> +	if (ctrl2 & CTRL2_PON) {
> +		alarm_flag = 0;
> +		err = rc5t619_rtc_alarm_flag_clr(&pdev->dev);
> +		if (err)
> +			return err;
> +	}
> +
> +	rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
> +

Please remove this blank line.

> +	if (IS_ERR(rtc->rtc)) {
> +		err = PTR_ERR(rtc->rtc);
> +		dev_err(dev, "RTC device register: err %d\n", err);
> +		return err;
> +	}
> +
> +	rtc->rtc->ops = &rc5t619_rtc_ops;
> +	rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
> +	rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
> +
> +	/* set interrupt and enable it */
> +	if (rtc->irq != -1) {
> +		device_init_wakeup(&pdev->dev, 1);
> +
> +		err = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
> +						rc5t619_rtc_irq,
> +						IRQF_ONESHOT,
> +						"rtc-rc5t619",
> +						&pdev->dev);
> +		if (err < 0) {
> +			dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
> +			rtc->irq = -1;
> +
> +			err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
> +			if (err)
> +				return err;
> +
> +		} else {
> +			/* enable wake */

I think you should move device_init_wakeup() here, unless your parse the
wakeup-source property.

> +			enable_irq_wake(rtc->irq);
> +			/* enable alarm_d */
> +			err = rc5t619_rtc_alarm_enable(&pdev->dev, alarm_flag);
> +			if (err) {
> +				dev_err(&pdev->dev, "failed rtc setup\n");
> +				return -EBUSY;
> +			}
> +		}
> +	} else {
> +		/* system don't want to using alarm interrupt, so close it */
> +		err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
> +		if (err) {
> +			dev_err(&pdev->dev, "disable rtc alarm error\n");

I don't think this message is necessary.

> +			return err;
> +		}
> +
> +		dev_err(&pdev->dev, "ricoh61x interrupt is disabled\n");

Maybe dev_warn as the driver just continues on.

> +	}
> +
> +	return rtc_register_device(rtc->rtc);
> +}

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com


More information about the Letux-kernel mailing list