[Letux-kernel] power management problems in ehci-omap

[Tony Lindgren]

* Andreas Kemnade <andreas at kemnade.info> [180206 06:42]:
> rechecked with a board with really nothing connected there
> Same behaviour

I've just verified that my test board power consumption goes
back to normal after rmmod ehci-omap with v4.15.

For ehci PM, it might be a bit easier to do nowadays that
we have Linux generic wakeirq support if somebody wants to
take a look at it. The PHY lines could have wakeirq events
enabled for the pads, and there is an older series from
Rogeq that does not use wakeirqs at:

https://lkml.org/lkml/2013/7/10/355

Regards,

Tony