[Gta04-owner] [PATCH 07/11] ARM: dts: omap3-gta04: Fix a GPIO line.

[NeilBrown]

From: NeilBrown <neil at brown.name>

GPIO_115 is in &gpio4, not &gpio3.

Also add comments to state which GPIO is used for some interrupts.

Signed-off-by: NeilBrown <neil at brown.name>
---
 arch/arm/boot/dts/omap3-gta04.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 6f1d4e72ada4..3df1a66fec6a 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -243,15 +243,15 @@
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 	};
 
 	/* accelerometer */
 	bma180 at 41 {
 		compatible = "bosch,bma180";
 		reg = <0x41>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
 
 	/* gyroscope */
@@ -310,7 +310,7 @@
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <600>;
 	};