[Gta04-owner] bootargs.scr - how does it work?

[Radek Polak]

On Thursday, November 22, 2012 02:35:19 PM Dr. H. Nikolaus Schaller wrote:

> > Could you please share the command?
> 
> mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n 'Boot Script' -d
> boot.txt boot.scr
> 
> should do the trick.

Thanks! It did it. But only partially.

I have uImage and bootargs.scr on the first FAT. This works perfectly. After 
touching "SD 1" in uboot menu QtMoko starts and i can see my args in 
/proc/cmdline.

But if i copy the same kernel and bootargs.scr to /boot on ext4 partition with 
QtMoko on p2 and select "SD 2" the screen goes green for a second and NAND 
kernel starts booting (i can see the tux logo).

Should i try ext2 or ext3 instead of ext4? Any ideas what can be wrong?

Regards

Radek