[Tinkerphones] Inferno on Letux 400 Minibook

[H. Nikolaus Schaller]

Hi David,
cool!

What I have just finished is a new RS232 console adapter for the Letux 400.

Unfortunately it works only on my (light green) sample device because the
later ones are missing the 4 pin PicoBlade connector in the battery bay. It
could be retrofitted but means opening the device and unfortunately the instructions
on Kwaak are lost. I remember that it was quite tricky to deinstall the display
hinge to get to the backside of the processor board.

Anyways, if anyone needs such an adapter I could provide kits or assembled
units.

BR,
Nikolaus


> Am 01.06.2021 um 17:36 schrieb David Boddie <david at boddie.org.uk>:
> 
> The code I wrote to support simple microSD card reading on the Ben NanoNote
> worked almost without modification on the Minibook.
> 
> I seem to remember that I ran into complications on the NanoNote, but perhaps
> the larger screen will be useful for diagnosing them.
> 
> The repository can be found here:
> https://gitlab.com/dboddie/inferno-os/-/tree/minibook
> 
> David<Inferno-Letux-400-SD.jpg>_______________________________________________
> Community mailing list
> Community at tinkerphones.org
> http://lists.goldelico.com/mailman/listinfo.cgi/community
> http://www.tinkerphones.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.goldelico.com/pipermail/community/attachments/20210601/fadfae97/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC01207.jpeg
Type: image/jpeg
Size: 65167 bytes
Desc: not available
URL: <http://lists.goldelico.com/pipermail/community/attachments/20210601/fadfae97/attachment-0001.jpeg>