[Tinkerphones] LetuxOS on PinePhone

H. Nikolaus Schaller hns at goldelico.com
Fri Feb 21 17:24:34 CET 2020


Hi,
I have a first image that I can 'makesd' on a fresh µSD:

makesd -u
DEV=/dev/sdb makesd -v latest pinephone -r quantumstep

It is not yet useable since it doesn't initialize X11 (there is no
proper setup for the Allwinner SoC). And, there is no tty on
the serial console. Just a login: blinking on the screen.

I have to find out why before I can start to fix the setups
and make a video...

Attached is a boot log.

BR,
Nikolaus



U-Boot SPL 2019.04-01010-g97c65687fd (Apr 26 2019 - 23:05:26 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.1(debug):v2.1-109-gc3e4e088
NOTICE:  BL31: Built : 23:03:52, Apr 26 2019
NOTICE:  BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE:  BL31: Found U-Boot DTB at 0x40893e0, model: SoPine with baseboard
INFO:    ARM GICv2 driver initialized
INFO:    Configuring SPC Controller
NOTICE:  BL31: PMIC: Detected AXP803 on RSB.
INFO:    PMIC: AXP803: dcdc1 voltage: 3.300V
INFO:    PMIC: AXP803: dcdc5 voltage: 1.200V
INFO:    PMIC: AXP803: dcdc6 voltage: 1.100V
INFO:    PMIC: AXP803: dldo1 voltage: 3.300V
INFO:    PMIC: AXP803: Enabling DC1SW
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 827319 was missing!
INFO:    BL31: cortex_a53: CPU workaround for 843419 was applied
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9


U-Boot 2019.04-01010-g97c65687fd (Apr 26 2019 - 23:05:26 +0000) UBports

CPU:   Allwinner A64 (SUN50I)
Model: SoPine with baseboard
DRAM:  2 GiB
MMC:   mmc at 1c0f000: 0, mmc at 1c11000: 1
Loading Environment from FAT... Unable to use mmc 1:1... In:    serial
Out:   serial
Err:   serial
Net:   phy interface7
eth0: ethernet at 1c30000
starting USB...
Bus usb at 1c1a000: USB EHCI 1.00
Bus usb at 1c1a400: USB OHCI 1.0
Bus usb at 1c1b000: USB EHCI 1.00
Bus usb at 1c1b400: USB OHCI 1.0
scanning bus usb at 1c1a000 for devices... 1 USB Device(s) found
scanning bus usb at 1c1a400 for devices... 1 USB Device(s) found
scanning bus usb at 1c1b000 for devices... 1 USB Device(s) found
scanning bus usb at 1c1b400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
724 bytes read in 1 ms (707 KiB/s)
## Executing script at 4fc00000
7416015 bytes read in 332 ms (21.3 MiB/s)
Uncompressed size: 16124416 = 0xF60A00
32791 bytes read in 3 ms (10.4 MiB/s)
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
EHCI failed to shut down host controller.
   Loading Device Tree to 0000000049ff4000, end 0000000049fff016 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.6.0-rc2-letux-arm64+ (hns at iMac.fritz.box) (gcc version 4.9.2 (GCC)) #2178 SMP Fri Feb 21 10:30:56 CET 2020
[    0.000000] Machine model: PinePhone
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000be000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xbdbcf100-0xbdbd0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000bfffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 22 pages/cpu s52352 r8192 d29568 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 root=PARTUUID=c30d97f0-01 rw rootwait
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x7bfff000-0x7ffff000] (64MB)
[    0.000000] Memory: 1941796K/2097152K available (10108K kernel code, 770K rwdata, 3948K rodata, 896K init, 371K bss, 122588K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x51c/0x6c0 with crng_init=0
[    0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
[    0.000000] arch_timer: CPU0: Trapping CNTVCT access
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000548] Console: colour dummy device 80x25
[    0.000963] printk: console [tty0] enabled
[    0.001063] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001088] pid_max: default: 32768 minimum: 301
[    0.001202] LSM: Security Framework initializing
[    0.001294] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001327] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001400] *** VALIDATE tmpfs ***
[    0.001934] *** VALIDATE proc ***
[    0.002176] *** VALIDATE cgroup ***
[    0.002192] *** VALIDATE cgroup2 ***
[    0.003049] ASID allocator initialised with 65536 entries
[    0.003148] rcu: Hierarchical SRCU implementation.
[    0.004477] EFI services will not be available.
[    0.004751] smp: Bringing up secondary CPUs ...
[    0.006126] Detected VIPT I-cache on CPU1
[    0.006181] arch_timer: CPU1: Trapping CNTVCT access
[    0.006192] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.007196] Detected VIPT I-cache on CPU2
[    0.007225] arch_timer: CPU2: Trapping CNTVCT access
[    0.007233] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.008156] Detected VIPT I-cache on CPU3
[    0.008182] arch_timer: CPU3: Trapping CNTVCT access
[    0.008190] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.008262] smp: Brought up 1 node, 4 CPUs
[    0.008348] SMP: Total of 4 processors activated.
[    0.008361] CPU features: detected: 32-bit EL0 Support
[    0.008420] CPU features: detected: CRC32 instructions
[    0.008892] CPU: All CPU(s) started at EL2
[    0.008923] alternatives: patching kernel code
[    0.010974] devtmpfs: initialized
[    0.018272] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.018324] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.019856] pinctrl core: initialized pinctrl subsystem
[    0.021166] thermal_sys: Registered thermal governor 'step_wise'
[    0.021809] DMI not present or invalid.
[    0.022616] NET: Registered protocol family 16
[    0.024357] DMA: preallocated 256 KiB pool for atomic allocations
[    0.025960] cpuidle: using governor menu
[    0.026347] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.027485] Serial: AMBA PL011 UART driver
[    0.054520] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.054555] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.054570] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.054585] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.057661] cryptd: max_cpu_qlen set to 1000
[    0.061971] ACPI: Interpreter disabled.
[    0.063422] iommu: Default domain type: Translated 
[    0.063835] vgaarb: loaded
[    0.064258] SCSI subsystem initialized
[    0.064790] usbcore: registered new interface driver usbfs
[    0.064853] usbcore: registered new interface driver hub
[    0.064927] usbcore: registered new device driver usb
[    0.065683] pps_core: LinuxPPS API ver. 1 registered
[    0.065708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[    0.065745] PTP clock support registered
[    0.065961] EDAC MC: Ver: 3.0.0
[    0.068703] clocksource: Switched to clocksource arch_sys_counter
[    0.069029] VFS: Disk quotas dquot_6.6.0
[    0.069119] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.069180] *** VALIDATE ramfs ***
[    0.069203] *** VALIDATE hugetlbfs ***
[    0.069417] pnp: PnP ACPI: disabled
[    0.076886] NET: Registered protocol family 2
[    0.077392] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.077452] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.077667] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.078046] TCP: Hash tables configured (established 16384 bind 16384)
[    0.078189] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.078260] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.078456] NET: Registered protocol family 1
[    0.078949] RPC: Registered named UNIX socket transport module.
[    0.078965] RPC: Registered udp transport module.
[    0.078976] RPC: Registered tcp transport module.
[    0.078986] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.079007] PCI: CLS 0 bytes, default 64
[    0.079988] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.080469] kvm [1]: IPA Size Limit: 40bits
[    0.081783] kvm [1]: vgic interrupt IRQ1
[    0.081928] kvm [1]: Hyp mode initialized successfully
[    0.089830] Initialise system trusted keyrings
[    0.090018] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.099547] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.100486] *** VALIDATE nfs ***
[    0.100576] *** VALIDATE nfs4 ***
[    0.100730] NFS: Registering the id_resolver key type
[    0.100769] Key type id_resolver registered
[    0.100781] Key type id_legacy registered
[    0.100802] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.101092] 9p: Installing v9fs 9p2000 file system support
[    0.120280] Key type asymmetric registered
[    0.120303] Asymmetric key parser 'x509' registered
[    0.120366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.120386] io scheduler mq-deadline registered
[    0.120398] io scheduler kyber registered
[    0.121271] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[    0.122366] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy
[    0.126219] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.128659] EINJ: ACPI disabled.
[    0.138295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.150407] loop: module loaded
[    0.154361] libphy: Fixed MDIO Bus: probed
[    0.154900] tun: Universal TUN/TAP device driver, 1.6
[    0.156123] thunder_xcv, ver 1.0
[    0.156196] thunder_bgx, ver 1.0
[    0.156253] nicpf, ver 1.0
[    0.156980] hclge is initializing
[    0.157145] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    0.157165] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.157275] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.157289] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.157349] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    0.157363] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.157422] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    0.157439] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.157668] sky2: driver version 1.30
[    0.158212] VFIO - User Level meta-driver version: 0.3
[    0.159990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.160023] ehci-pci: EHCI PCI platform driver
[    0.160079] ehci-platform: EHCI generic platform driver
[    0.160340] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.160375] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.160519] ehci-platform 1c1a000.usb: irq 20, io mem 0x01c1a000
[    0.172852] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    0.173676] hub 1-0:1.0: USB hub found
[    0.173725] hub 1-0:1.0: 1 port detected
[    0.174527] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.174569] ohci-pci: OHCI PCI platform driver
[    0.174681] ohci-platform: OHCI generic platform driver
[    0.174938] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    0.174971] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    0.175103] ohci-platform 1c1a400.usb: irq 21, io mem 0x01c1a400
[    0.237433] hub 2-0:1.0: USB hub found
[    0.237487] hub 2-0:1.0: 1 port detected
[    0.238962] usbcore: registered new interface driver usb-storage
[    0.243478] sun6i-rtc 1f00000.rtc: registered as rtc0
[    0.243512] sun6i-rtc 1f00000.rtc: RTC enabled
[    0.243688] i2c /dev entries driver
[    0.245945] sdhci: Secure Digital Host Controller Interface driver
[    0.245978] sdhci: Copyright(c) Pierre Ossman
[    0.246213] Synopsys Designware Multimedia Card Interface Driver
[    0.247269] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.248368] ledtrig-cpu: registered to indicate activity on CPUs
[    0.249523] usbcore: registered new interface driver usbhid
[    0.249553] usbhid: USB HID core driver
[    0.251770] NET: Registered protocol family 17
[    0.252023] 9pnet: Installing 9P2000 support
[    0.252104] Key type dns_resolver registered
[    0.252586] registered taskstats version 1
[    0.252605] Loading compiled-in X.509 certificates
[    0.261990] sun50i-a64-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator
[    0.267038] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[    0.267452] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[    0.270408] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input1
[    0.271925] axp20x-adc axp813-adc: DMA mask not set
[    0.272965] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
[    0.274748] dcdc1: supplied by regulator-dummy
[    0.275128] dcdc2: supplied by regulator-dummy
[    0.275454] dcdc4: supplied by regulator-dummy
[    0.275722] dcdc5: supplied by regulator-dummy
[    0.275998] dcdc6: supplied by regulator-dummy
[    0.276287] dc1sw: supplied by regulator-dummy
[    0.276503] aldo1: supplied by regulator-dummy
[    0.276582] dovdd-csi: Bringing 3300000uV into 2800000-2800000uV
[    0.276926] aldo2: supplied by regulator-dummy
[    0.277226] aldo3: supplied by regulator-dummy
[    0.277508] dldo1: supplied by regulator-dummy
[    0.277838] dldo2: supplied by regulator-dummy
[    0.277941] vcc-mipi-io: Bringing 2900000uV into 3300000-3300000uV
[    0.278217] dldo3: supplied by regulator-dummy
[    0.278294] avdd-csi: Bringing 2900000uV into 2800000-2800000uV
[    0.278549] dldo4: supplied by regulator-dummy
[    0.278828] eldo1: supplied by regulator-dummy
[    0.279137] eldo2: supplied by regulator-dummy
[    0.279412] eldo3: supplied by regulator-dummy
[    0.279483] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV
[    0.279747] fldo1: supplied by regulator-dummy
[    0.280063] fldo2: supplied by regulator-dummy
[    0.280357] rtc-ldo: supplied by regulator-dummy
[    0.280610] ldo-io0: supplied by regulator-dummy
[    0.281103] ldo-io1: supplied by regulator-dummy
[    0.281193] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV
[    0.281470] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[    0.286264] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.287186] printk: console [ttyS0] disabled
[    0.287271] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 31, base_baud = 1500000) is a 16550A
[    1.552396] printk: console [ttyS0] enabled
[    1.558066] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 32, base_baud = 1500000) is a 16550A
[    1.566973] serial serial0: tty port ttyS1 registered
[    1.572869] 1c28c00.serial: ttyS2 at MMIO 0x1c28c00 (irq = 33, base_baud = 1500000) is a 16550A
[    1.582552] ehci-platform 1c1b000.usb: EHCI Host Controller
[    1.588176] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    1.596047] ehci-platform 1c1b000.usb: irq 22, io mem 0x01c1b000
[    1.616719] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    1.623513] hub 3-0:1.0: USB hub found
[    1.627315] hub 3-0:1.0: 1 port detected
[    1.632174] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    1.638833] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[    1.646704] ohci-platform 1c1b400.usb: irq 23, io mem 0x01c1b400
[    1.717373] hub 4-0:1.0: USB hub found
[    1.721181] hub 4-0:1.0: 1 port detected
[    1.726129] usb_phy_generic usb_phy_generic.1.auto: usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[    1.738783] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input2
[    1.747509] input: gpio-vibrator as /devices/platform/vibrator/input/input3
[    1.854186] Goodix-TS 0-005d: ID 917S, version: 0200
[    1.860254] Goodix-TS 0-005d: Direct firmware load for goodix_917S_cfg.bin failed with error -2
[    1.872323] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 792000 KHz
[    1.881876] random: fast init done
[    1.883955] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 816000 KHz
[    1.903784] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input4
[    1.920087] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.949836] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    1.983581] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    2.002730] mmc0: new high speed SDHC card at address 59b4
[    2.008887] mmcblk0: mmc0:59b4 USD   7.51 GiB 
[    2.015307]  mmcblk0: p1
[    2.020720] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[    2.031296] usb0-vbus: supplied by vcc5v0
[    2.035791] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:10 UTC (10)
[    2.044992] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
[    2.117204] mmc2: new DDR MMC card at address 0001
[    2.122716] mmcblk2: mmc2:0001 RS016G 14.6 GiB 
[    2.127577] mmcblk2boot0: mmc2:0001 RS016G partition 1 4.00 MiB
[    2.133790] mmcblk2boot1: mmc2:0001 RS016G partition 2 4.00 MiB
[    2.141821]  mmcblk2: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 >
[    2.149334] mmcblk2: p1 size 21585920 extends beyond EOD, truncated
[    2.192161] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    2.200343] VFS: Mounted root (ext3 filesystem) on device 179:1.
[    2.214514] devtmpfs: mounted
[    2.217884] Freeing unused kernel memory: 896K
[    2.224744] Run /sbin/init as init process
[    2.840128] systemd-udevd[1545]: starting version 215
[    2.907658] random: udevd: uninitialized urandom read (16 bytes read)
[    2.916575] random: udevd: uninitialized urandom read (16 bytes read)
[    3.096305] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL)
[    3.109723] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    3.696175] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    3.746941] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    4.298462] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    4.424365] mc: Linux media interface: v0.10
[    4.597828] inv-mpu6050-i2c 1-0068: mounting matrix not found: using identity...
[    4.804928] i2c i2c-1: Added multiplexed i2c bus 4
[    4.810726] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    4.811292] sun4i-i2s 1c22c00.dai: Could not register PCM
[    4.832876] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    4.842488] sun4i-i2s 1c22c00.dai: Could not register PCM
[    4.848780] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    4.858151] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.155260] lima 1c40000.gpu: IRQ ppmmu2 not found
[    5.160107] lima 1c40000.gpu: IRQ ppmmu3 not found
[    5.164968] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[    5.168744] iio iio:device3: registered magnetometer lis3mdl
[    5.171240] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[    5.177686] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    5.183178] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[    5.192599] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.197862] lima 1c40000.gpu: IRQ pp2 not found
[    5.207779] lima 1c40000.gpu: IRQ pp3 not found
[    5.212326] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[    5.220861] lima 1c40000.gpu: bus rate = 200000000
[    5.225669] lima 1c40000.gpu: mod rate = 297000000
[    5.230778] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0
[    5.238752] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    5.248138] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.349288] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    5.377665] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.497056] videodev: Linux video capture interface: v2.00
[    5.512776] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.653377] Bluetooth: Core ver 2.22
[    5.657082] NET: Registered protocol family 31
[    5.661555] Bluetooth: HCI device and connection manager initialized
[    5.667939] Bluetooth: HCI socket layer initialized
[    5.672858] Bluetooth: L2CAP socket layer initialized
[    5.678031] Bluetooth: SCO socket layer initialized
[    5.679631] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.690843] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.772165] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
[    5.782029] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
[    5.790980] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[    5.798850] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon])
[    5.808365] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon])
[    5.817564] sun4i-drm display-engine: failed to bind 1ca0000.dsi (ops sun6i_dsi_ops [sun6i_mipi_dsi]): -517
[    5.827848] sun4i-drm display-engine: Couldn't bind all pipelines components
[    5.835061] sun4i-drm display-engine: master bind failed: -517
[    5.879374] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599
[    5.885307] panel-xingbangda-xbd599 1ca0000.dsi.0: [drm:xbd599_probe [panel_xingbangda_xbd599]] 720x1440 at 60 24bpp dsi 4dl - ready
[    5.898108] sun4i-i2s 1c22c00.dai: Could not register PCM
[    5.906824] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
[    5.916708] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
[    5.917276] ov5640 3-004c: ov5640_init_slave_id: failed with -6
[    5.925689] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[    5.939053] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon])
[    5.948582] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon])
[    5.957794] sun4i-drm display-engine: bound 1ca0000.dsi (ops sun6i_dsi_ops [sun6i_mipi_dsi])
[    5.966248] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.972862] [drm] No driver support for vblank timestamp query.
[    5.979245] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[    5.990303] drm_setup_crtcs_fb: sw_rotations=1
[    5.994839] drm_setup_crtcs_fb: fbcon_rotate_hint=0
[    6.021815] Bluetooth: HCI UART driver ver 2.3
[    6.021944] Bluetooth: HCI UART protocol H4 registered
[    6.021995] Bluetooth: HCI UART protocol LL registered
[    6.022055] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.022397] Bluetooth: HCI UART protocol Broadcom registered
[    6.471778] Console: switching to colour frame buffer device 90x90
[    6.545254] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
[    6.565593] sun4i-i2s 1c22c00.dai: Could not register PCM
[    6.661426] sun4i-i2s 1c22c00.dai: Could not register PCM
[    7.358150] random: crng init done
[    9.066917] Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8703
[    9.079701] Bluetooth: hci0: RTL: chip_type status=0 type=5
[    9.088884] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    9.095007] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_fw.bin
[    9.524373] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723cs_xx_fw.bin failed with error -2
[    9.533722] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8723cs_xx_fw.bin not found
[    9.787552] Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8703
[    9.800326] Bluetooth: hci0: RTL: chip_type status=0 type=5
[    9.809509] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    9.815634] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_fw.bin
[    9.822153] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723cs_xx_fw.bin failed with error -2
[    9.831458] Bluetooth: hci0: RTL: firmware file rtl_bt/rtl8723cs_xx_fw.bin not found
[    9.887258] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[   10.258001] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[   20.623914] NET: Registered protocol family 10
[   20.629424] Segment Routing with IPv6
[   33.764726] vbat-wifi: disabling
[   33.768058] dc1sw: disabling
[   33.771191] usb0-vbus: disabling
[   33.774507] vcc5v0: disabling
[   33.778196] vconn5v0: disabling



More information about the Community mailing list