[Letux-kernel] BeagleY-AI arrived

[H. Nikolaus Schaller]

Hi,
I have received an BeagleY-AI today and baked an SD card (not
yet one with LetuxOS of course, but the Ubuntu-xfce image provided
by BeagleBoard.org).

Here is the first login (after providing a new password):

iMac:~ hns$ ssh debian at 192.168.6.2
Debian GNU/Linux 12

BeagleBoard.org Debian Bookworm Xfce Image 2024-06-19
Support: https://bbb.io/debian
default username is [debian] with a one time password of [temppwd]

debian at 192.168.6.2's password:  
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Jun 19 07:57:59 2024 from 192.168.6.1
debian at BeagleBone:~$ uname -a
Linux BeagleBone 6.1.80-ti-arm64-r57 #1bookworm SMP PREEMPT_DYNAMIC Wed Jun 19 00:28:40 UTC 2024 aarch64 GNU/Linux
debian at BeagleBone:~$ df
Filesystem     1K-blocks    Used Available Use% Mounted on
udev             1468928       0   1468928   0% /dev
tmpfs             388392    1660    386732   1% /run
/dev/mmcblk1p3   7896684 6075204   1398824  82% /
tmpfs            1941956       0   1941956   0% /dev/shm
tmpfs               5120       8      5112   1% /run/lock
/dev/mmcblk1p1    258095   57750    200345  23% /boot/firmware
tmpfs             388388      48    388340   1% /run/user/1000
debian at BeagleBone:~$ cat /etc/debian_version  12.5
debian at BeagleBone:~$ 

So a first step will be to analyse how they boot the board
(obviously through U-Boot in the first paritition) and how
to build a kernel (obviuosly they use a lot of overlays).

BR,
Nikolaus

PS: the board gets quite hot even when idling: had 53°C after
ca. 5 minutes of first poweron... Well, it may draw upto 3A at 5V and
this energy must go somewhere.