[Letux-kernel] X1600 / LX16 support - here: adding MMC

[Andreas Kemnade]

On Fri, 9 Feb 2024 18:10:49 +0100
"H. Nikolaus Schaller" <hns at goldelico.com> wrote:

> > I have debugged several other emmc/sd problems on other boards this way.  
> 
> I agree that it can work but IMHO setting it up is quite a distraction
> and in the saved time the problem can be analysed by different methods.
> 
> But we can of course work in parallel - and one method will find the bugs.
> 
something interesting seen:
while typing in commands in the shell.

ke[    0.000191] mmc0: host does not support reading read-only switch, assuming 
write-enable
[    0.000191] mmc0: new high speed SDHC card at address 59b4
[    0.000191] mmcblk0: mmc0:59b4 SN32G 29.7 GiB
[    0.000191]  mmcblk0: unable to read partition table
[    0.000191] mmc0: card 59b4 removed
r[    0.000191] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.000191] mmc0: error -145 whilst initialising SD card

and endless errors again...

Regards,
Andreas


> >