[Letux-kernel] [PATCH v16 1/4] drm/bridge: dw-hdmi: introduce dw_hdmi_enable_poll()

Paul Cercueil paul at crapouillou.net
Thu Mar 3 17:51:28 CET 2022


Hi Nikolaus,

Le jeu., mars 3 2022 at 17:43:05 +0100, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> Hi Neil,
> 
>>  Am 03.03.2022 um 17:30 schrieb H. Nikolaus Schaller 
>> <hns at goldelico.com>:
>> 
>>  Hi Neil,
>> 
>>>  Am 03.03.2022 um 17:23 schrieb Neil Armstrong 
>>> <narmstrong at baylibre.com>:
>>> 
>>>  Hi,
>>> 
>>>  On 26/02/2022 18:12, H. Nikolaus Schaller wrote:
>>>>  so that specialization drivers like ingenic-dw-hdmi can enable 
>>>> polling.
>>>>  Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>>>>  ---
>>>>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 +++++++++
>>>>  include/drm/bridge/dw_hdmi.h              | 1 +
>>>>  2 files changed, 10 insertions(+)
>>>>  diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c 
>>>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>>>  index 4befc104d2200..43e375da131e8 100644
>>>>  --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>>>  +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>>>  @@ -3217,6 +3217,15 @@ static int dw_hdmi_parse_dt(struct dw_hdmi 
>>>> *hdmi)
>>>>  	return 0;
>>>>  }
>>>>  +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable)
>>>>  +{
>>>>  +	if (hdmi->bridge.dev)
>>>>  +		hdmi->bridge.dev->mode_config.poll_enabled = enable;
>>>>  +	else
>>>>  +		dev_warn(hdmi->dev, "no hdmi->bridge.dev");
>>>>  +}
>>>>  +EXPORT_SYMBOL_GPL(dw_hdmi_enable_poll);
>>>>  +
>>>>  struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
>>>>  			      const struct dw_hdmi_plat_data *plat_data)
>>>>  {
>>>>  diff --git a/include/drm/bridge/dw_hdmi.h 
>>>> b/include/drm/bridge/dw_hdmi.h
>>>>  index 2a1f85f9a8a3f..963960794b40e 100644
>>>>  --- a/include/drm/bridge/dw_hdmi.h
>>>>  +++ b/include/drm/bridge/dw_hdmi.h
>>>>  @@ -196,5 +196,6 @@ enum drm_connector_status 
>>>> dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
>>>>  void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
>>>>  			    bool force, bool disabled, bool rxsense);
>>>>  void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
>>>>  +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable);
>>>>    #endif /* __IMX_HDMI_H__ */
>>> 
>>>  As I understand, this is because the IRQ line of the dw-hdmi IP 
>>> isn't connected right ? and you use the display-connector ddc gpio 
>>> instead ?
>> 
>>  Yes. The IRQ line is not connected on all boards as far as I can 
>> see.
>> 
>>> 
>>>  In this case I think the Ingenic DRM core should call 
>>> drm_kms_helper_poll_init(drm) instead.
>> 
>>  Ah, that is good. it seems to do "dw_hdmi_enable_poll()" in a more 
>> generic way.
> 
> Well, I looked through source code and it is defined as
> 
> 	void drm_kms_helper_poll_init(struct drm_device *dev)
> 
> But there is no direct pointer to some drm_device available.
> Neither in dw-hdmi nor ingenic-dw-hdmi.

Well he said "the Ingenic DRM core" aka ingenic-drm-drv.c. You do have 
access to the main drm_device in the ingenic_drm_bind() function, so 
you can add it there (with a cleanup function calling 
drm_kms_helper_poll_fini() registered with drmm_add_action_or_reset()).

Cheers,
-Paul

> What should the parameter to drm_kms_helper_poll_init(drm) be?
> 
> From comparing code to be able to set mode_config.poll_enabled = 
> enable it should be
> 
> 	&hdmi->bridge.dev
> 
> but the struct dw_hdmi *hdmi is an opaque type for the 
> ingenic-dw-hdmi driver.
> So it can't access the hdmi-bridge directly.
> 
> What we can do is to make dw_hdmi_enable_poll() call 
> drm_kms_helper_poll_init()
> or drm_kms_helper_poll_fini().
> 
> BR and thanks,
> Nikolaus
> 
> 




More information about the Letux-kernel mailing list