[Letux-kernel] [PATCH v12 2/9] drm/ingenic: Add support for JZ4780 and HDMI output

Paul Cercueil paul at crapouillou.net
Wed Feb 2 13:06:11 CET 2022


Hi Nikolaus,

Le mer., févr. 2 2022 at 12:56:35 +0100, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> Hi Paul,
> thanks for the reviews. Looks as if we are close to making a goal.
> 
>>  Am 02.02.2022 um 11:23 schrieb Paul Cercueil <paul at crapouillou.net>:
>> 
>>  Hi Nikolaus,
>> 
>>  Le lun., janv. 31 2022 at 13:26:48 +0100, H. Nikolaus Schaller 
>> <hns at goldelico.com> a écrit :
>>>  From: Paul Boddie <paul at boddie.org.uk>
>>>  Add support for the LCD controller present on JZ4780 SoCs.
>>>  This SoC uses 8-byte descriptors which extend the current
>>>  4-byte descriptors used for other Ingenic SoCs.
>>>  Tested on MIPS Creator CI20 board.
>>>  Signed-off-by: Paul Boddie <paul at boddie.org.uk>
>>>  Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
>>>  Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>>>  ---
>>>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 61 
>>> ++++++++++++++++++++++-
>>>  drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++
>>>  2 files changed, 98 insertions(+), 1 deletion(-)
>>>  diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c 
>>> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>>>  index 9c60fc4605e4b..ccdb9eedd9247 100644
>>>  --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>>>  +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>>>  @@ -6,6 +6,7 @@
>>>  #include "ingenic-drm.h"
>>>  +#include <linux/bitfield.h>
>>>  #include <linux/component.h>
>>>  #include <linux/clk.h>
>>>  #include <linux/dma-mapping.h>
>>>  @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>>>  	u32 addr;
>>>  	u32 id;
>>>  	u32 cmd;
>>>  +	/* extended hw descriptor for jz4780 */
>>>  +	u32 offsize;
>>>  +	u32 pagewidth;
>>>  +	u32 cpos;
>>>  +	u32 dessize;
>>>  } __aligned(16);
>>>  struct ingenic_dma_hwdescs {
>>>  @@ -59,7 +65,9 @@ struct ingenic_dma_hwdescs {
>>>  struct jz_soc_info {
>>>  	bool needs_dev_clk;
>>>  	bool has_osd;
>>>  +	bool has_alpha;
>>>  	bool map_noncoherent;
>>>  +	bool use_extended_hwdesc;
>>>  	unsigned int max_width, max_height;
>>>  	const u32 *formats_f0, *formats_f1;
>>>  	unsigned int num_formats_f0, num_formats_f1;
>>>  @@ -446,6 +454,9 @@ static int 
>>> ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>>>  	if (!crtc)
>>>  		return 0;
>>>  +	if (plane == &priv->f0)
>>>  +		return -EINVAL;
>> 
>>  This will break JZ4725B -> JZ4770 SoCs, the f0 plane is perfectly 
>> usable there.
> 
> Hm. I think it was your request/proposal to add this [1]?

Because otherwise with your current patchset the f0 plane does not work 
*on JZ4780*. It does work on older SoCs.

> What I have forgotten is why the f0 plane should not be usable for 
> jz4780.

We return an error here to prevent userspace from using the f0 plane 
until it's effectively working on the JZ4780.

Cheers,
-Paul

> BR and thanks,
> Nikolaus
> 
> [1] end of 
> https://patchwork.kernel.org/project/dri-devel/patch/2c7d0aa7d3ef480ebb996d37c27cbaa6f722728b.1633436959.git.hns@goldelico.com/#24578683
> 
> 
>> 
>>  Cheers,
>>  -Paul
>> 
>>>  +
>>>  	crtc_state = drm_atomic_get_existing_crtc_state(state,
>>>  							crtc);
>>>  	if (WARN_ON(!crtc_state))
>>>  @@ -662,6 +673,33 @@ static void 
>>> ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>>>  		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>>>  		hwdesc->next = dma_hwdesc_addr(priv, next_id);
>>>  +		if (priv->soc_info->use_extended_hwdesc) {
>>>  +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
>>>  +
>>>  +			/* Extended 8-byte descriptor */
>>>  +			hwdesc->cpos = 0;
>>>  +			hwdesc->offsize = 0;
>>>  +			hwdesc->pagewidth = 0;
>>>  +
>>>  +			switch (newstate->fb->format->format) {
>>>  +			case DRM_FORMAT_XRGB1555:
>>>  +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
>>>  +				fallthrough;
>>>  +			case DRM_FORMAT_RGB565:
>>>  +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
>>>  +				break;
>>>  +			case DRM_FORMAT_XRGB8888:
>>>  +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
>>>  +				break;
>>>  +			}
>>>  +			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
>>>  +					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
>>>  +			hwdesc->dessize =
>>>  +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
>>>  +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
>>>  +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
>>>  +		}
>>>  +
>>>  		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>>>  			fourcc = newstate->fb->format->format;
>>>  @@ -693,6 +731,9 @@ static void 
>>> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>>>  		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>>>  	}
>>>  +	if (priv->soc_info->use_extended_hwdesc)
>>>  +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
>>>  +
>>>  	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>>>  		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>>>  	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>>>  @@ -1015,6 +1056,7 @@ static int ingenic_drm_bind(struct device 
>>> *dev, bool has_components)
>>>  	long parent_rate;
>>>  	unsigned int i, clone_mask = 0;
>>>  	int ret, irq;
>>>  +	u32 osdc = 0;
>>>  	soc_info = of_device_get_match_data(dev);
>>>  	if (!soc_info) {
>>>  @@ -1272,7 +1314,10 @@ static int ingenic_drm_bind(struct device 
>>> *dev, bool has_components)
>>>  	/* Enable OSD if available */
>>>  	if (soc_info->has_osd)
>>>  -		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
>>>  +		osdc |= JZ_LCD_OSDC_OSDEN;
>>>  +	if (soc_info->has_alpha)
>>>  +		osdc |= JZ_LCD_OSDC_ALPHAEN;
>>>  +	regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
>>>  	mutex_init(&priv->clk_mutex);
>>>  	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
>>>  @@ -1468,10 +1513,24 @@ static const struct jz_soc_info 
>>> jz4770_soc_info = {
>>>  	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>>>  };
>>>  +static const struct jz_soc_info jz4780_soc_info = {
>>>  +	.needs_dev_clk = true,
>>>  +	.has_osd = true,
>>>  +	.has_alpha = true,
>>>  +	.use_extended_hwdesc = true,
>>>  +	.max_width = 4096,
>>>  +	.max_height = 2048,
>>>  +	.formats_f1 = jz4770_formats_f1,
>>>  +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
>>>  +	.formats_f0 = jz4770_formats_f0,
>>>  +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>>>  +};
>>>  +
>>>  static const struct of_device_id ingenic_drm_of_match[] = {
>>>  	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>>>  	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info 
>>> },
>>>  	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
>>>  +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>>>  	{ /* sentinel */ },
>>>  };
>>>  MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
>>>  diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h 
>>> b/drivers/gpu/drm/ingenic/ingenic-drm.h
>>>  index 22654ac1dde1c..cb1d09b625881 100644
>>>  --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
>>>  +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
>>>  @@ -44,8 +44,11 @@
>>>  #define JZ_REG_LCD_XYP1				0x124
>>>  #define JZ_REG_LCD_SIZE0			0x128
>>>  #define JZ_REG_LCD_SIZE1			0x12c
>>>  +#define JZ_REG_LCD_PCFG				0x2c0
>>>  #define JZ_LCD_CFG_SLCD				BIT(31)
>>>  +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
>>>  +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
>>>  #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
>>>  #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
>>>  #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
>>>  @@ -63,6 +66,7 @@
>>>  #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
>>>  #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
>>>  #define JZ_LCD_CFG_18_BIT			BIT(7)
>>>  +#define JZ_LCD_CFG_24_BIT			BIT(6)
>>>  #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
>>>  #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
>>>  @@ -132,6 +136,7 @@
>>>  #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
>>>  #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
>>>  #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
>>>  +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
>>>  #define JZ_LCD_SYNC_MASK			0x3ff
>>>  @@ -153,6 +158,7 @@
>>>  #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
>>>  #define JZ_LCD_OSDC_OSDEN			BIT(0)
>>>  +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
>>>  #define JZ_LCD_OSDC_F0EN			BIT(3)
>>>  #define JZ_LCD_OSDC_F1EN			BIT(4)
>>>  @@ -176,6 +182,38 @@
>>>  #define JZ_LCD_SIZE01_WIDTH_LSB			0
>>>  #define JZ_LCD_SIZE01_HEIGHT_LSB		16
>>>  +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
>>>  +#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
>>>  +#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
>>>  +
>>>  +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
>>>  +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
>>>  +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
>>>  +#define JZ_LCD_CPOS_RGB555			BIT(30)
>>>  +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
>>>  +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
>>>  +#define JZ_LCD_CPOS_COEFFICIENT_0		0
>>>  +#define JZ_LCD_CPOS_COEFFICIENT_1		1
>>>  +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
>>>  +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
>>>  +
>>>  +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
>>>  +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
>>>  +#define JZ_LCD_RGBC_422				BIT(8)
>>>  +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
>>>  +
>>>  +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
>>>  +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
>>>  +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
>>>  +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
>>>  +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
>>>  +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
>>>  +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
>>>  +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
>>>  +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
>>>  +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
>>>  +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
>>>  +
>>>  struct device;
>>>  struct drm_plane;
>>>  struct drm_plane_state;
>>>  --
>>>  2.33.0
>> 
>> 
> 




More information about the Letux-kernel mailing list