[Letux-kernel] [PATCH v4 10/10] drm/ingenic: add some jz4780 specific features

Paul Cercueil paul at crapouillou.net
Tue Sep 28 11:58:58 CEST 2021


Hi,

Le lun., sept. 27 2021 at 18:44:28 +0200, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> From: Paul Boddie <paul at boddie.org.uk>
> 
> The jz4780 has some features which need initialization
> according to the vendor kernel.
> 
> Signed-off-by: Paul Boddie <paul at boddie.org.uk>
> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 39 
> +++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c 
> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index e2df4b085905..605549b316b5 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -66,6 +66,10 @@ struct jz_soc_info {
>  	bool needs_dev_clk;
>  	bool has_osd;
>  	bool map_noncoherent;
> +	bool has_alpha;
> +	bool has_pcfg;
> +	bool has_recover;
> +	bool has_rgbc;
>  	bool use_extended_hwdesc;
>  	unsigned int max_width, max_height;
>  	const u32 *formats_f0, *formats_f1;
> @@ -732,6 +736,9 @@ static void 
> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>  		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>  	}
> 
> +	if (priv->soc_info->has_recover)
> +		cfg |= JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN;

Did you actually test this? I know that in theory it sounds like 
something we'd want, but unless there is a proven use for it, it's 
better to keep it disabled.

> +
>  	/* set use of the 8-word descriptor and OSD foreground usage. */
>  	if (priv->soc_info->use_extended_hwdesc)
>  		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
> @@ -1321,6 +1328,25 @@ static int ingenic_drm_bind(struct device 
> *dev, bool has_components)
>  	if (soc_info->has_osd)
>  		regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
> 
> +	if (soc_info->has_alpha)
> +		regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_ALPHAEN);

I remember you saying that OSD mode was not yet working on the JZ4780. 
So I can't see how you could have tested this.

> +
> +	/* Magic values from the vendor kernel for the priority thresholds. 
> */
> +	if (soc_info->has_pcfg)
> +		regmap_write(priv->map, JZ_REG_LCD_PCFG,
> +			     JZ_LCD_PCFG_PRI_MODE |
> +			     JZ_LCD_PCFG_HP_BST_16 |
> +			     (511 << JZ_LCD_PCFG_THRESHOLD2_OFFSET) |
> +			     (400 << JZ_LCD_PCFG_THRESHOLD1_OFFSET) |
> +			     (256 << JZ_LCD_PCFG_THRESHOLD0_OFFSET));

Unless you add a big comment that explains what these values do and why 
we do want them, I don't want magic values in here. The fact that the 
kernel vendor sets this doesn't mean it's needed and/or wanted.

> +
> +	/* RGB output control may be superfluous. */
> +	if (soc_info->has_rgbc)
> +		regmap_write(priv->map, JZ_REG_LCD_RGBC,
> +			     JZ_LCD_RGBC_RGB_FORMAT_ENABLE |
> +			     JZ_LCD_RGBC_ODD_RGB |
> +			     JZ_LCD_RGBC_EVEN_RGB);

ingenic-drm only supports RGB output right now, so I guess the 
RGB_FORMAT_ENABLE bit needs to be set in patch [2/10], otherwise patch 
[2/10] cannot state that it adds support for the JZ4780, if it doesn't 
actually work.

The other two bits can be dropped, they are already set in 
ingenic_drm_encoder_atomic_mode_set().

> +
>  	mutex_init(&priv->clk_mutex);
>  	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
> 
> @@ -1484,6 +1510,9 @@ static const struct jz_soc_info jz4740_soc_info 
> = {
>  	.needs_dev_clk = true,
>  	.has_osd = false,
>  	.map_noncoherent = false,
> +	.has_pcfg = false,
> +	.has_recover = false,
> +	.has_rgbc = false,
>  	.max_width = 800,
>  	.max_height = 600,
>  	.formats_f1 = jz4740_formats,
> @@ -1496,6 +1525,9 @@ static const struct jz_soc_info 
> jz4725b_soc_info = {
>  	.needs_dev_clk = false,
>  	.has_osd = true,
>  	.map_noncoherent = false,
> +	.has_pcfg = false,
> +	.has_recover = false,
> +	.has_rgbc = false,

This is wrong, the JZ4725B and JZ4770 SoCs both have the RGBC register 
and the RECOVER bit.

Cheers,
-Paul

>  	.max_width = 800,
>  	.max_height = 600,
>  	.formats_f1 = jz4725b_formats_f1,
> @@ -1509,6 +1541,9 @@ static const struct jz_soc_info jz4770_soc_info 
> = {
>  	.needs_dev_clk = false,
>  	.has_osd = true,
>  	.map_noncoherent = true,
> +	.has_pcfg = false,
> +	.has_recover = false,
> +	.has_rgbc = false,
>  	.max_width = 1280,
>  	.max_height = 720,
>  	.formats_f1 = jz4770_formats_f1,
> @@ -1521,6 +1556,10 @@ static const struct jz_soc_info 
> jz4770_soc_info = {
>  static const struct jz_soc_info jz4780_soc_info = {
>  	.needs_dev_clk = true,
>  	.has_osd = true,
> +	.has_alpha = true,
> +	.has_pcfg = true,
> +	.has_recover = true,
> +	.has_rgbc = true,
>  	.use_extended_hwdesc = true,
>  	.max_width = 4096,
>  	.max_height = 2048,
> --
> 2.31.1
> 




More information about the Letux-kernel mailing list