[Letux-kernel] [PATCH v5 5/7] MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers

Paul Cercueil paul at crapouillou.net
Tue Oct 5 22:50:12 CEST 2021


Hi Nikolaus & Paul,

Le mar., oct. 5 2021 at 14:29:17 +0200, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> From: Paul Boddie <paul at boddie.org.uk>
> 
> A specialisation of the generic Synopsys HDMI driver is employed for 
> JZ4780
> HDMI support. This requires a new driver, plus device tree and 
> configuration
> modifications.
> 
> Signed-off-by: Paul Boddie <paul at boddie.org.uk>
> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
> ---
>  arch/mips/boot/dts/ingenic/jz4780.dtsi | 45 
> ++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi 
> b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> index 9e34f433b9b5..c3c18a59c377 100644
> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> @@ -424,6 +424,51 @@ i2c4: i2c at 10054000 {
>  		status = "disabled";
>  	};
> 
> +	hdmi: hdmi at 10180000 {
> +		compatible = "ingenic,jz4780-dw-hdmi";
> +		reg = <0x10180000 0x8000>;
> +		reg-io-width = <4>;
> +
> +		clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
> +		clock-names = "iahb", "isfr";
> +
> +		assigned-clocks = <&cgu JZ4780_CLK_HDMI>;
> +		assigned-clock-rates = <27000000>;

Any reason why this is set to 27 MHz? Is it even required? Because with 
the current ci20.dts, it won't be clocked at anything but 48 MHz.

> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <3>;
> +
> +		/* ddc-i2c-bus = <&i2c4>; */
> +
> +		status = "disabled";
> +	};
> +
> +	lcdc0: lcdc0 at 13050000 {
> +		compatible = "ingenic,jz4780-lcd";
> +		reg = <0x13050000 0x1800>;
> +
> +		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
> +		clock-names = "lcd", "lcd_pclk";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <31>;
> +
> +		status = "disabled";

I think you can keep lcdc0 enabled by default (not lcdc1 though), since 
it is highly likely that you'd want that.

Cheers,
-Paul

> +	};
> +
> +	lcdc1: lcdc1 at 130a0000 {
> +		compatible = "ingenic,jz4780-lcd";
> +		reg = <0x130a0000 0x1800>;
> +
> +		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
> +		clock-names = "lcd", "lcd_pclk";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <31>;
> +
> +		status = "disabled";
> +	};
> +
>  	nemc: nemc at 13410000 {
>  		compatible = "ingenic,jz4780-nemc", "simple-mfd";
>  		reg = <0x13410000 0x10000>;
> --
> 2.33.0
> 




More information about the Letux-kernel mailing list