[Letux-kernel] [PATCH v5 2/7] drm/ingenic: Add support for JZ4780 and HDMI output

Paul Cercueil paul at crapouillou.net
Tue Oct 5 22:22:27 CEST 2021


Hi Nikolaus,

Le mar., oct. 5 2021 at 14:29:14 +0200, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> From: Paul Boddie <paul at boddie.org.uk>
> 
> Add support for the LCD controller present on JZ4780 SoCs.
> This SoC uses 8-byte descriptors which extend the current
> 4-byte descriptors used for other Ingenic SoCs.
> 
> Tested on MIPS Creator CI20 board.
> 
> Signed-off-by: Paul Boddie <paul at boddie.org.uk>
> Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 85 
> +++++++++++++++++++++--
>  drivers/gpu/drm/ingenic/ingenic-drm.h     | 42 +++++++++++
>  2 files changed, 122 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c 
> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index f73522bdacaa..e2df4b085905 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -6,6 +6,7 @@
> 
>  #include "ingenic-drm.h"
> 
> +#include <linux/bitfield.h>
>  #include <linux/component.h>
>  #include <linux/clk.h>
>  #include <linux/dma-mapping.h>
> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>  	u32 addr;
>  	u32 id;
>  	u32 cmd;
> +	/* extended hw descriptor for jz4780 */
> +	u32 offsize;
> +	u32 pagewidth;
> +	u32 cpos;
> +	u32 dessize;
>  } __aligned(16);
> 
>  struct ingenic_dma_hwdescs {
> @@ -60,9 +66,11 @@ struct jz_soc_info {
>  	bool needs_dev_clk;
>  	bool has_osd;
>  	bool map_noncoherent;
> +	bool use_extended_hwdesc;
>  	unsigned int max_width, max_height;
>  	const u32 *formats_f0, *formats_f1;
>  	unsigned int num_formats_f0, num_formats_f1;
> +	unsigned int max_reg;
>  };
> 
>  struct ingenic_drm_private_state {
> @@ -168,12 +176,11 @@ static bool ingenic_drm_writeable_reg(struct 
> device *dev, unsigned int reg)
>  	}
>  }
> 
> -static const struct regmap_config ingenic_drm_regmap_config = {
> +static struct regmap_config ingenic_drm_regmap_config = {
>  	.reg_bits = 32,
>  	.val_bits = 32,
>  	.reg_stride = 4,
> 
> -	.max_register = JZ_REG_LCD_SIZE1,
>  	.writeable_reg = ingenic_drm_writeable_reg,
>  };
> 
> @@ -663,6 +670,37 @@ static void 
> ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>  		hwdesc->next = dma_hwdesc_addr(priv, next_id);
> 
> +		if (priv->soc_info->use_extended_hwdesc) {
> +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
> +
> +			/* Extended 8-byte descriptor */
> +			hwdesc->cpos = 0;
> +			hwdesc->offsize = 0;
> +			hwdesc->pagewidth = 0;
> +
> +			switch (newstate->fb->format->format) {
> +			case DRM_FORMAT_XRGB1555:
> +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
> +				fallthrough;
> +			case DRM_FORMAT_RGB565:
> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
> +				break;
> +			case DRM_FORMAT_XRGB8888:
> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
> +				break;
> +			}
> +			hwdesc->cpos |= JZ_LCD_CPOS_PREMULTIPLY_LCD |
> +					    (JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 <<
> +					     JZ_LCD_CPOS_COEFFICIENT_OFFSET);

Knowing that OSD mode doesn't really work with this patch, I doubt you 
need to configure per-plane alpha blending.

> +
> +			hwdesc->dessize =
> +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |

Same here.

> +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK <<
> +					   JZ_LCD_DESSIZE_HEIGHT_OFFSET, height - 1) |
> +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK <<
> +					   JZ_LCD_DESSIZE_WIDTH_OFFSET, width - 1);

Better pre-shift your *_MASK macros (and use GENMASK() in them) and 
remove the *_OFFSET macros.

> +		}
> +
>  		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>  			fourcc = newstate->fb->format->format;
> 
> @@ -694,6 +732,10 @@ static void 
> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>  		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>  	}
> 
> +	/* set use of the 8-word descriptor and OSD foreground usage. */

I think you can remove this comment - this code doesn't actually set 
OSD mode, but it does enable the use of the extended hardware 
descriptor format, and I think it is already self-explanatory.

> +	if (priv->soc_info->use_extended_hwdesc)
> +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
> +
>  	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>  		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>  	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> @@ -1010,6 +1052,7 @@ static int ingenic_drm_bind(struct device *dev, 
> bool has_components)
>  	struct drm_encoder *encoder;
>  	struct ingenic_drm_bridge *ib;
>  	struct drm_device *drm;
> +	struct regmap_config regmap_config;
>  	void __iomem *base;
>  	long parent_rate;
>  	unsigned int i, clone_mask = 0;
> @@ -1063,8 +1106,10 @@ static int ingenic_drm_bind(struct device 
> *dev, bool has_components)
>  		return PTR_ERR(base);
>  	}
> 
> +	regmap_config = ingenic_drm_regmap_config;
> +	regmap_config.max_register = soc_info->max_reg;
>  	priv->map = devm_regmap_init_mmio(dev, base,
> -					  &ingenic_drm_regmap_config);
> +					  &regmap_config);

I remember saying to split this change into its own patch :)

>  	if (IS_ERR(priv->map)) {
>  		dev_err(dev, "Failed to create regmap\n");
>  		return PTR_ERR(priv->map);
> @@ -1274,7 +1319,7 @@ static int ingenic_drm_bind(struct device *dev, 
> bool has_components)
> 
>  	/* Enable OSD if available */
>  	if (soc_info->has_osd)
> -		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
> +		regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);

This change is unrelated to this patch, and I'm not even sure it's a 
valid change. The driver shouldn't rely on previous register values.

> 
>  	mutex_init(&priv->clk_mutex);
>  	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
> @@ -1444,6 +1489,7 @@ static const struct jz_soc_info jz4740_soc_info 
> = {
>  	.formats_f1 = jz4740_formats,
>  	.num_formats_f1 = ARRAY_SIZE(jz4740_formats),
>  	/* JZ4740 has only one plane */
> +	.max_reg = JZ_REG_LCD_SIZE1,
>  };
> 
>  static const struct jz_soc_info jz4725b_soc_info = {
> @@ -1456,6 +1502,7 @@ static const struct jz_soc_info 
> jz4725b_soc_info = {
>  	.num_formats_f1 = ARRAY_SIZE(jz4725b_formats_f1),
>  	.formats_f0 = jz4725b_formats_f0,
>  	.num_formats_f0 = ARRAY_SIZE(jz4725b_formats_f0),
> +	.max_reg = JZ_REG_LCD_SIZE1,
>  };
> 
>  static const struct jz_soc_info jz4770_soc_info = {
> @@ -1468,12 +1515,28 @@ static const struct jz_soc_info 
> jz4770_soc_info = {
>  	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
>  	.formats_f0 = jz4770_formats_f0,
>  	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
> +	.max_reg = JZ_REG_LCD_SIZE1,
> +};
> +
> +static const struct jz_soc_info jz4780_soc_info = {
> +	.needs_dev_clk = true,
> +	.has_osd = true,
> +	.use_extended_hwdesc = true,
> +	.max_width = 4096,
> +	.max_height = 2048,
> +	/* REVISIT: do we support formats different from jz4770? */

 From a quick look at the PMs, it doesn't seem so.

> +	.formats_f1 = jz4770_formats_f1,
> +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
> +	.formats_f0 = jz4770_formats_f0,
> +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
> +	.max_reg = JZ_REG_LCD_PCFG,
>  };
> 
>  static const struct of_device_id ingenic_drm_of_match[] = {
>  	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>  	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>  	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
> +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>  	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
> @@ -1492,10 +1555,16 @@ static int ingenic_drm_init(void)
>  {
>  	int err;
> 
> +	if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI)) {
> +		err = platform_driver_register(ingenic_dw_hdmi_driver_ptr);
> +		if (err)
> +			return err;
> +	}

As I said in your v4... You don't need to add this here. The 
ingenic-dw-hdmi.c should take care of registering its driver.

As for the overall change... I am a bit annoyed that this only supports 
the F1 plane at the screen's resolution. Anything else (F1 plane at 
specific coordinates, F0 plane alone, or F0+F1) does not work. I think 
at least the F1 plane's position should be easy to do (just setting the 
cpos field in the hwdesc).

It is OK to leave the rest for later (I'm not asking you to do all 
that). However it would be a good idea to add a check in 
ingenic_drm_crtc_atomic_check(), which would return -EINVAL if anything 
else than the working configuration is attempted.

Cheers,
-Paul

> +
>  	if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) {
>  		err = platform_driver_register(ingenic_ipu_driver_ptr);
>  		if (err)
> -			return err;
> +			goto err_hdmi_unreg;
>  	}
> 
>  	err = platform_driver_register(&ingenic_drm_driver);
> @@ -1507,6 +1576,10 @@ static int ingenic_drm_init(void)
>  err_ipu_unreg:
>  	if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
>  		platform_driver_unregister(ingenic_ipu_driver_ptr);
> +err_hdmi_unreg:
> +	if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI))
> +		platform_driver_unregister(ingenic_dw_hdmi_driver_ptr);
> +
>  	return err;
>  }
>  module_init(ingenic_drm_init);
> @@ -1515,6 +1588,8 @@ static void ingenic_drm_exit(void)
>  {
>  	platform_driver_unregister(&ingenic_drm_driver);
> 
> +	if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI))
> +		platform_driver_unregister(ingenic_dw_hdmi_driver_ptr);
>  	if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
>  		platform_driver_unregister(ingenic_ipu_driver_ptr);
>  }
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h 
> b/drivers/gpu/drm/ingenic/ingenic-drm.h
> index 22654ac1dde1..13dbc5d25c3b 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
> @@ -44,8 +44,11 @@
>  #define JZ_REG_LCD_XYP1				0x124
>  #define JZ_REG_LCD_SIZE0			0x128
>  #define JZ_REG_LCD_SIZE1			0x12c
> +#define JZ_REG_LCD_PCFG				0x2c0
> 
>  #define JZ_LCD_CFG_SLCD				BIT(31)
> +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
>  #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
>  #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
>  #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
> @@ -63,6 +66,7 @@
>  #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
>  #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
>  #define JZ_LCD_CFG_18_BIT			BIT(7)
> +#define JZ_LCD_CFG_24_BIT			BIT(6)
>  #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
> 
>  #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
> @@ -132,6 +136,7 @@
>  #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
>  #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
>  #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
> +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
> 
>  #define JZ_LCD_SYNC_MASK			0x3ff
> 
> @@ -153,6 +158,7 @@
>  #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
> 
>  #define JZ_LCD_OSDC_OSDEN			BIT(0)
> +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
>  #define JZ_LCD_OSDC_F0EN			BIT(3)
>  #define JZ_LCD_OSDC_F1EN			BIT(4)
> 
> @@ -176,6 +182,41 @@
>  #define JZ_LCD_SIZE01_WIDTH_LSB			0
>  #define JZ_LCD_SIZE01_HEIGHT_LSB		16
> 
> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
> +#define JZ_LCD_DESSIZE_HEIGHT_OFFSET		12
> +#define JZ_LCD_DESSIZE_WIDTH_OFFSET		0
> +#define JZ_LCD_DESSIZE_HEIGHT_MASK		0xfff
> +#define JZ_LCD_DESSIZE_WIDTH_MASK		0xfff
> +
> +/* TODO: 4,5 and 7 match the above BPP */
> +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
> +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
> +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
> +#define JZ_LCD_CPOS_RGB555			BIT(30)
> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
> +#define JZ_LCD_CPOS_COEFFICIENT_0		0
> +#define JZ_LCD_CPOS_COEFFICIENT_1		1
> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
> +
> +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
> +#define JZ_LCD_RGBC_422				BIT(8)
> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
> +
> +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
> +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
> +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
> +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
> +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
> +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
> +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
> +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
> +
>  struct device;
>  struct drm_plane;
>  struct drm_plane_state;
> @@ -187,5 +228,6 @@ void ingenic_drm_plane_disable(struct device 
> *dev, struct drm_plane *plane);
>  bool ingenic_drm_map_noncoherent(const struct device *dev);
> 
>  extern struct platform_driver *ingenic_ipu_driver_ptr;
> +extern struct platform_driver *ingenic_dw_hdmi_driver_ptr;
> 
>  #endif /* DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H */
> --
> 2.33.0
> 




More information about the Letux-kernel mailing list