[Letux-kernel] Audio Offset for handsfree speakers

Michael Mrozek info at openpandora.de
Wed Dec 1 19:23:41 CET 2021


Am Mittwoch, dem 01.12.2021 um 19:04 +0100 schrieb H. Nikolaus Schaller:
> 

Hi,

> > Just changing one register does sound easy enough to do - but as a
> > non-developer, I need help with that.
> > 
> > Does the driver already support that?
> 
> Well, there is code - but it is not in operation and likely very broken:
> 
> https://git.goldelico.com/?p=letux-kernel.git;a=blobdiff;f=sound/soc/ti/omap-abe-twl6040.c;h=18167ae58410accdba6834c1a05805d48ae9cf6d;hp=576215f90ddb4deffa6f65986a780963f7d935ef;hb=5046975492e8cb9d0ba08aa18f4ca68a6e34497e;hpb=6aa328535c43caafa1218b3bef72d72d84293f2c
> 
> > If not, is it hard to implement?
> 
> Some definitions are also there:
> 
> https://git.goldelico.com/?p=letux-kernel.git;a=blob;f=sound/soc/codecs/twl6040.h;h=f4f4b14cc0c4f75463187fa00b7b3e6e33b61608;hb=2f2d34f0d2e2b29e25d45dfc93b7677b10988329
> 
> What I am not sure is if this is just code to prepare the aess driver/firmware
> to write these registers.
> 

Well, it should work without the whole AESS / ABE stuff working, so it should be
possible to be made to work in a simple driver as well.


> > Can I set the register directly for testing to find the proper value?
> > If so, how? (Which command do I need to run to change it?)
> 
> Since the chip is connected by i2c you can write registers by i2cset
> or probably better is through the debugfs which allows to read/write regmaps.

Okay... no idea how exactly I can do that, but as far as I can see I use i2cset
to find out the address of the chip on the bus and then send the register
over...?



-- 
Greetings,

Michael Mrozek

-----------------------
OpenPandora GmbH
CEO: Michael Mrozek

Schäffbräustr. 11
85049 Ingolstadt
Germany
Tel.: +49 841 990 5548
http://www.openpandora.de/
HRB 4879, Amtsgericht Ingolstadt
-----------------------
eMail: mrozek at openpandora.org


More information about the Letux-kernel mailing list