[Letux-kernel] [PATCH v5 0/5] MIPS: Fixes and improvements for CI20 board (JZ4780)

H. Nikolaus Schaller hns at goldelico.com
Sat Feb 29 20:45:43 CET 2020

* add #include irq.h not in PMU patch but in RTC patch
* added Reviewed-by: Paul Cercueil <paul at crapouillou.net>

PATCH V4 2020-02-28 19:02:57:
* use KEY_F13 for SW1 button to avoid conflict with Enter of an USB keyboard (suggested by Paul Cercueil <paul at crapouillou.net>)
* tidy up all new #includes to be at beginning of file and alphabetically sorted (suggested by Paul Cercueil <paul at crapouillou.net>)
* add new #include to DTS only when needed (suggested by Paul Cercueil <paul at crapouillou.net>)

PATCH V3 2020-02-16 21:21:07:
* dropped "drm: ingenic-drm: add MODULE_DEVICE_TABLE" because it will be resubmitted
  with a HDMI driver solution
* added Cc: stable at vger.kernel.org where appropriate (suggested by Paul Cercueil <paul at crapouillou.net>)
* squashed all other DTS and CONFIG changes into single patches (suggested by Paul Cercueil <paul at crapouillou.net>)

PATCH V2 2020-02-14 17:10:33:
* dropped "net: davicom: dm9000: allow to pass MAC address through mac_addr module parameter"
  from this series because it goes through the netdev tree
  (suggested by Andrew Lunn <andrew at lunn.ch>)
* added a "fixes:" for "MIPS: DTS: CI20: fix PMU definitions for ACT8600"
  and "MIPS: DTS: CI20: fix interrupt for pcf8563 RTC"
  (suggested by Andreas Kemnade <andreas at kemnade.info>)
* "i2c: jz4780: silence log flood on txabrt" dropped because it is
  replaced by a new version in v5.6 by Wolfram Sang <wsa at the-dreams.de>

PATCH V1 2020-02-11 22:41:43:
This patch set provides several improvements for the CI20 board:

* suppress warnings from i2c if device is not responding
* make ingenic-drm found through DT
* allow davicom dm9000 ethernet controller to use MAC address provided by U-Boot
* fix #include in jz4780.dtsi
* configure for loadable kernel modules
* add DTS for IR sensor and SW1 button
* configure so that LEDs, IR sensor, SW1 button have drivers
* fix DTS for ACT8600 PMU and configure driver
* fix interrupt of nxp,pcf8563

There is another patch set in our queue to add HDMI support on top of this work.

Signed-off-by: Paul Boddie <paul at boddie.org.uk>
Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>

Alex Smith (1):
  MIPS: DTS: CI20: add DT node for IR sensor

H. Nikolaus Schaller (4):
  MIPS: DTS: CI20: fix PMU definitions for ACT8600
  MIPS: DTS: CI20: fix interrupt for pcf8563 RTC
  MIPS: DTS: CI20: multiple DTS improvements
  MIPS: CI20: defconfig: multiple improvements

 arch/mips/boot/dts/ingenic/ci20.dts | 71 ++++++++++++++++++++++-------
 arch/mips/configs/ci20_defconfig    | 21 +++++++++
 2 files changed, 76 insertions(+), 16 deletions(-)


More information about the Letux-kernel mailing list