[Letux-kernel] [PATCH v4 2/5] MIPS: DTS: CI20: fix PMU definitions for ACT8600

[Paul Cercueil]

Hi Nikolaus,


Le sam., févr. 29, 2020 at 19:58, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> Hi Paul,
> 
>>  Am 29.02.2020 um 17:09 schrieb Paul Cercueil <paul at crapouillou.net>:
>> 
>>  Hi Nikolaus,
>> 
>> 
>>  Le ven., févr. 28, 2020 at 19:02, H. Nikolaus Schaller 
>> <hns at goldelico.com> a écrit :
>>>  There is a ACT8600 on the CI20 board and the bindings of the
>>>  ACT8865 driver have changed without updating the CI20 device
>>>  tree. Therefore the PMU can not be probed successfully and
>>>  is running in power-on reset state.
>>>  Fix DT to match the latest act8865-regulator bindings.
>>>  Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
>>>  Cc: stable at vger.kernel.org
>>>  Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>>>  ---
>>>  arch/mips/boot/dts/ingenic/ci20.dts | 48 
>>> ++++++++++++++++++++---------
>>>  1 file changed, 33 insertions(+), 15 deletions(-)
>>>  diff --git a/arch/mips/boot/dts/ingenic/ci20.dts 
>>> b/arch/mips/boot/dts/ingenic/ci20.dts
>>>  index 59c104289ece..44741e927d2b 100644
>>>  --- a/arch/mips/boot/dts/ingenic/ci20.dts
>>>  +++ b/arch/mips/boot/dts/ingenic/ci20.dts
>>>  @@ -4,6 +4,8 @@
>>>  #include "jz4780.dtsi"
>>>  #include <dt-bindings/clock/ingenic,tcu.h>
>>>  #include <dt-bindings/gpio/gpio.h>
>>>  +#include <dt-bindings/interrupt-controller/irq.h>
>> 
>>  This include should be in patch 3/5 where it's first used.
> 
> Yes. That is much better.
> 
>> 
>>  With that fixed:
>>  Reviewed-by: Paul Cercueil <paul at crapouillou.net>
>> 
>>  for the whole series.
> 
> What is easier: that you fix it during applying somewhere
> or should I send a v5?

I guess send a V5.

- Paul

> 
> BR,
> Nikolaus
>