[Letux-kernel] [PATCH v4 4/5] MIPS: DTS: CI20: multiple DTS improvements

H. Nikolaus Schaller hns at goldelico.com
Fri Feb 28 19:02:52 CET 2020


a) add DT node for SW1 as Enter button

The SW1 button can be used as a simple one-button keyboard
and is connected to PD17.

Note: SW1 has a second meaning to change the boot sequence
when pressed while powering on.

b) give eth0_power a defined voltage.

This is a 3.3V power switch (DVNET3.3V).

Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 0251ca154ccb..ce6bf7e7dbba 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -4,6 +4,7 @@
 #include "jz4780.dtsi"
 #include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/regulator/active-semi,8865-regulator.h>
 
@@ -27,6 +28,17 @@
 		       0x30000000 0x30000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		sw1 {
+			label = "ci20:sw1";
+			linux,code = <KEY_F13>;
+			gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -58,6 +70,8 @@
 	eth0_power: fixedregulator at 0 {
 		compatible = "regulator-fixed";
 		regulator-name = "eth0_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
-- 
2.23.0



More information about the Letux-kernel mailing list