[Letux-kernel] [PATCH v3 3/6] MIPS: DTS: CI20: fix PMU definitions for ACT8600

Paul Cercueil paul at crapouillou.net
Fri Feb 28 15:34:04 CET 2020


Hi Nikolaus,


Le dim., févr. 16, 2020 at 21:20, H. Nikolaus Schaller 
<hns at goldelico.com> a écrit :
> There is a ACT8600 on the CI20 board and the bindings of the
> ACT8865 driver have changed without updating the CI20 device
> tree. Therefore the PMU can not be probed successfully and
> is running in power-on reset state.
> 
> Fix DT to match the latest act8865-regulator bindings.
> 
> Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
> Cc: stable at vger.kernel.org
> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
> ---
>  arch/mips/boot/dts/ingenic/ci20.dts | 48 
> ++++++++++++++++++++---------
>  1 file changed, 33 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts 
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 59c104289ece..4f48bc16fb52 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> @@ -153,6 +153,8 @@
>  	pinctrl-0 = <&pins_uart4>;
>  };
> 
> +#include <dt-bindings/regulator/active-semi,8865-regulator.h>

Includes at the beginning of the file please. Keeps it tidy.

> +
>  &i2c0 {
>  	status = "okay";
> 
> @@ -166,65 +168,81 @@
>  		reg = <0x5a>;
>  		status = "okay";
> 
> +/*
> +Optional input supply properties:
> +- for act8600:
> +  - vp1-supply: The input supply for DCDC_REG1
> +  - vp2-supply: The input supply for DCDC_REG2
> +  - vp3-supply: The input supply for DCDC_REG3
> +  - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 
> and LDO_REG8
> +  SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
> +*/
> +
>  		regulators {
>  			vddcore: SUDCDC1 {
> -				regulator-name = "VDDCORE";
> +				regulator-name = "DCDC_REG1";
>  				regulator-min-microvolt = <1100000>;
>  				regulator-max-microvolt = <1100000>;
>  				regulator-always-on;
>  			};
>  			vddmem: SUDCDC2 {
> -				regulator-name = "VDDMEM";
> +				regulator-name = "DCDC_REG2";
>  				regulator-min-microvolt = <1500000>;
>  				regulator-max-microvolt = <1500000>;
>  				regulator-always-on;
>  			};
>  			vcc_33: SUDCDC3 {
> -				regulator-name = "VCC33";
> +				regulator-name = "DCDC_REG3";
>  				regulator-min-microvolt = <3300000>;
>  				regulator-max-microvolt = <3300000>;
>  				regulator-always-on;
>  			};
>  			vcc_50: SUDCDC4 {
> -				regulator-name = "VCC50";
> +				regulator-name = "SUDCDC_REG4";
>  				regulator-min-microvolt = <5000000>;
>  				regulator-max-microvolt = <5000000>;
>  				regulator-always-on;
>  			};
>  			vcc_25: LDO_REG5 {
> -				regulator-name = "VCC25";
> +				regulator-name = "LDO_REG5";
>  				regulator-min-microvolt = <2500000>;
>  				regulator-max-microvolt = <2500000>;
>  				regulator-always-on;
>  			};
>  			wifi_io: LDO_REG6 {
> -				regulator-name = "WIFIIO";
> +				regulator-name = "LDO_REG6";
>  				regulator-min-microvolt = <2500000>;
>  				regulator-max-microvolt = <2500000>;
>  				regulator-always-on;
>  			};
>  			vcc_28: LDO_REG7 {
> -				regulator-name = "VCC28";
> +				regulator-name = "LDO_REG7";
>  				regulator-min-microvolt = <2800000>;
>  				regulator-max-microvolt = <2800000>;
>  				regulator-always-on;
>  			};
>  			vcc_15: LDO_REG8 {
> -				regulator-name = "VCC15";
> +				regulator-name = "LDO_REG8";
>  				regulator-min-microvolt = <1500000>;
>  				regulator-max-microvolt = <1500000>;
>  				regulator-always-on;
>  			};
> -			vcc_18: LDO_REG9 {
> -				regulator-name = "VCC18";
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> +			vrtc_18: LDO_REG9 {
> +				regulator-name = "LDO_REG9";
> +				/* Despite the datasheet stating 3.3V for REG9 and
> +				   driver expecting that, REG9 outputs 1.8V.
> +				   Likely the CI20 uses a chip variant.
> +				   Since it is a simple on/off LDO the exact values
> +				   do not matter.
> +				*/
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
>  				regulator-always-on;
>  			};
>  			vcc_11: LDO_REG10 {
> -				regulator-name = "VCC11";
> -				regulator-min-microvolt = <1100000>;
> -				regulator-max-microvolt = <1100000>;
> +				regulator-name = "LDO_REG10";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
>  				regulator-always-on;
>  			};
>  		};
> --
> 2.23.0
> 




More information about the Letux-kernel mailing list