[Letux-kernel] [PATCH v3] extcon: palmas: hide error messages if gpio returns -EPROBE_DEFER

Chanwoo Choi cw00.choi at samsung.com
Tue Feb 18 11:35:47 CET 2020


On 2/18/20 7:21 PM, Ladislav Michl wrote:
> On Tue, Feb 18, 2020 at 12:28:25PM +0900, Chanwoo Choi wrote:
>> On 2/17/20 10:38 PM, H. Nikolaus Schaller wrote:
>>> If the gpios are probed after this driver (e.g. if they
>>> come from an i2c expander) there is no need to print an
>>> error message.
>>>
>>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>>> ---
>>>  drivers/extcon/extcon-palmas.c | 8 ++++++--
>>>  1 file changed, 6 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
>>> index edc5016f46f1..cea58d0cb457 100644
>>> --- a/drivers/extcon/extcon-palmas.c
>>> +++ b/drivers/extcon/extcon-palmas.c
>>> @@ -205,14 +205,18 @@ static int palmas_usb_probe(struct platform_device *pdev)
>>>  
>>>  	palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
>>>  							GPIOD_IN);
>>> -	if (IS_ERR(palmas_usb->id_gpiod)) {
>>> +	if (PTR_ERR(palmas_usb->id_gpiod) == -EPROBE_DEFER) {
>>> +		return -EPROBE_DEFER;
>>> +	} else if (IS_ERR(palmas_usb->id_gpiod)) {
>>>  		dev_err(&pdev->dev, "failed to get id gpio\n");
>>>  		return PTR_ERR(palmas_usb->id_gpiod);
>>>  	}
>>>  
>>>  	palmas_usb->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus",
>>>  							GPIOD_IN);
>>> -	if (IS_ERR(palmas_usb->vbus_gpiod)) {
>>> +	if (PTR_ERR(palmas_usb->vbus_gpiod) == -EPROBE_DEFER) {
>>> +		return -EPROBE_DEFER;
>>> +	} else if (IS_ERR(palmas_usb->vbus_gpiod)) {
>>>  		dev_err(&pdev->dev, "failed to get vbus gpio\n");
>>>  		return PTR_ERR(palmas_usb->vbus_gpiod);
>>>  	}
>>>
>>
>> I think that it is enough to handle the -EPROBE_DEFER.
>> Also, I prefer to use single if/else statement 
>> instead of the nested if/else statement.
>>
>> Applied it.
> 
> Uh... As it is? Then it is matter of time it triggers someones cocci
> script pointing to else after return. Could you at least fix this?

Sorry. I don't understand. Do you mean that this patch has the
some issue of cocci script?

I think that it fixes the probe sequence issue
between extcon-palmas and gpio driver. It is not related to
any result from cocci script. If the extcon-palmas.c has
the issue by cocci or checkpatch, anyone can send the other patch
for fixup.

I think that it is enough to fix the issue which is only
related to the probe sequence between gpio and extcon-palmas.c

> 
> Thanks,
> 	ladis
> 
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics


More information about the Letux-kernel mailing list