[Letux-kernel] LetuxOS: Kernel: m-stable 5.6.19 successful

[H. Nikolaus Schaller]

KVERSION: v5.6.19 - http://www.kernel.org
CONFIGS:  arch/arm/configs/letux_defconfig arch/arm/configs/letux_lpae_defconfig arch/arm64/configs/letux_defconfig arch/mips/configs/letux_defconfig

Infos
=====
Project Home: http://projects.goldelico.com/p/gta04-kernel/
Issues: http://projects.goldelico.com/p/gta04-kernel/issues/
Original: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/?h=v5.6.19
Elixir: https://elixir.bootlin.com/linux/v5.6.19/source

Downloads
=========
git: http://git.goldelico.com/?p=letux-kernel.git;a=shortlog;h=letux-5.6.19
ARM: http://download.goldelico.com/letux-kernel/letux-5.6.19
ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.6.19-lpae
ARM64: http://download.goldelico.com/letux-kernel/letux-5.6.19-arm64
MIPS: http://download.goldelico.com/letux-kernel/letux-5.6.19-l400

Recent CHANGES (http://download.goldelico.com/letux-kernel/letux-5.6.19/src/CHANGES)
==============
* arm: configs: pyra: stablize pyra defconfig (by Nick Elsmore <nicholaselsmore at gmail.com>)

* fix flickering keyboard (by David Shah <dave at ds0.me>)
* fix scm_wkup_pad_conf to make high performance audio clock work (by David Shah <dave at ds0.me>)

* add hack to allow Pyra to "reboot" (by David Shah <dave at ds0.me>)
* aess-v5: rework of the omap-abe-twl6040.c driver and omap5-le-abe.dtsi to work again and try to load aess firmware

* usb3503: Fix reset polarity (by David Shah <dave at ds0.me>)
* add "drm/etnaviv: request pages from DMA32 zone when needed"
* iio: adc: axp20x: fix missing "name" attribute in /sys/bus/iio
* rootfs: udev rules: PinePhone: create symlink for /dev/input/touchscreen
* ARM64: letux_defconfig: configure for iio_input_bridge (PinePhone accelerometer)
* rootfs: improve all /root/find* tools to handle devices without 'name', 'id' etc.
* rootfs: PinePhone: fix X11 setup
* ARM64: DTS: Pinephone: make blue LED a heartbeat

letux-5.6.19 Sun Jun 21 22:23:31 CEST 2020:
* [EOL]
* omap5: added support for GC320 and DRI3WSEGL (by David Shah <dave at ds0.me>)
* omap3: off_mode: enable only for gta04 and not openpandora etc.
* gpu: pvrsgxkm fix resource leak (by David Shah <dave at ds0.me>)
* fix for Pyra TILER rotation (by David Shah <dave at ds0.me>)
* hack to ignore errors=remount-ro for ubifs

letux-5.6.15 Wed May 27 23:46:12 CEST 2020:

letux-5.6.13 Mon May 18 23:21:13 CEST 2020:
* arm: letux_defconfig: configure networking and crypto kernel modules required for strongSwan
* apply more fixes to hdq to make gta04 battery status readout work again

letux-5.6.10 Mon May  4 22:44:37 CEST 2020:
* apply a fix for omap-hdq for gta04 for testing
* restore the patch for omap-hdq which breaks reading our battery status

letux-5.6.7 Mon Apr 27 13:17:47 CEST 2020:

letux-5.6.5 Tue Apr 21 01:34:19 CEST 2020:
* revert a patch for omap-hdq which breaks reading our battery status

letux-5.6.4 Mon Apr 13 23:01:12 CEST 2020:
* iio: input-bridge: fix potential NULL dereference in iio_device_unregister_inputbridge()

letux-5.6.2 Thu Apr  2 11:52:08 CEST 2020:

letux-5.6.1 Wed Apr  1 20:21:55 CEST 2020:

letux-5.6 Mon Mar  30 19:34:08 CEST 2020:

letux-5.6-rc7 Mon Mar 23 10:25:29 CET 2020:
* added some patches to pvrsrvkm-1.9.2253347
* added "gpu: pvr: remove bogus release" (improves pvrsrvkm)
* added "ARM: dts: omap5: Add bus_dma_limit for L3 bus" to letux/omap5-idle in the hope that it makes LPAE (4GB RAM) more stable

letux-5.6-rc6 Mon Mar 16 08:02:07 CET 2020:
* Pyra V5.3 mainboard has RING0 connected to gpio15_wk1 so that we can re-enable wakeup on incoming call
* add support for Pyra mass production variant (omap5-letux-cortex15-v5.3+pyra-v5.3.dtb)

letux-5.6-rc5 Mon Mar  9 16:41:38 CET 2020:
* known to be significantly broken in this release:
- OMAP5: console framebuffer rotation broken
- OMAP5: ABE/AESS code broken
- OMAP3: 1GHz OPP broken by "ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()"
- jz4780: HDMI broken (display remains black)
- jz4780: SGX leads to kernel panic and reboot
* prepare letux-panel-setup for kobolino EPDC
* increase CMA to 64 MB (needed for kobolino EPDC)
* fixes and experiments for kobolino EPDC
* revert two hack infections from the Pinephone kernel break the Letux 3704 panel and affect the bmc150

letux-5.6-rc4 Tue Mar  3 06:39:54 CET 2020:
* jz4780/ci20: rework of patch sets in discussion with maintainers (no functional change)

letux-5.6-rc3 Mon Feb 24 22:48:53 CET 2020:
* configure arm64 (PinePhone) for Ethernet Gadget
* fix letux-panel-setup to properly handle PinePhone
* some compile fix for "sound: soc: simple-card: add clk_div support"
* fixes for pinephone panel drivers to compile with v5.6 (get_mode has got a second parameter)
* fix pandora_nub and as5013 driver to properly use procfs
* merge: include letux/pinephone
=== more lines cut off ===

Build Warnings
==============
ARM: http://download.goldelico.com/letux-kernel/letux-5.6.19/src/warnings.log
ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.6.19-lpae/src/warnings.log
ARM64: http://download.goldelico.com/letux-kernel/letux-5.6.19-arm64/src/warnings.log
MIPS: http://download.goldelico.com/letux-kernel/letux-5.6.19-l400/src/warnings.log