[Letux-kernel] LetuxOS: Kernel: m-stable 5.7.18 successful

[H. Nikolaus Schaller]

KVERSION: v5.7.18 - http://www.kernel.org
CONFIGS:  arch/arm/configs/letux_defconfig arch/arm/configs/letux_lpae_defconfig arch/arm64/configs/letux_defconfig arch/mips/configs/letux_defconfig

Infos
=====
Project Home: http://projects.goldelico.com/p/gta04-kernel/
Issues: http://projects.goldelico.com/p/gta04-kernel/issues/
Original: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/?h=v5.7.18
Elixir: https://elixir.bootlin.com/linux/v5.7.18/source

Downloads
=========
git: http://git.goldelico.com/?p=letux-kernel.git;a=shortlog;h=letux-5.7.18
ARM: http://download.goldelico.com/letux-kernel/letux-5.7.18
ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.7.18-lpae
ARM64: http://download.goldelico.com/letux-kernel/letux-5.7.18-arm64
MIPS: http://download.goldelico.com/letux-kernel/letux-5.7.18-l400

Recent CHANGES (http://download.goldelico.com/letux-kernel/letux-5.7.18/src/CHANGES)
==============
letux-5.7.18 Wed Aug 26 15:51:04 CEST 2020:

letux-5.7.17 Mon Aug 24 21:46:26 CEST 2020:

letux-5.7.15 Tue Aug 18 21:25:05 CEST 2020:
* fix pyra display resp. omapdss address (by David Shah <dave at ds0.me>)
* fix flickering keyboard (by David Shah <dave at ds0.me>)
* fix scm_wkup_pad_conf to make high performance audio clock work (by David Shah <dave at ds0.me>)

letux-5.7.11 Wed Jul 29 17:47:42 CEST 2020:
* add hack to allow Pyra to "reboot" (by David Shah <dave at ds0.me>)
* aess-v5: rework of the omap-abe-twl6040.c driver and omap5-le-abe.dtsi to work again and try to load aess firmware

letux-5.7.10 Mon Jul 27 11:09:36 CEST 2020:
* usb3503: Fix reset polarity (by David Shah <dave at ds0.me>)

letux-5.7.9 Thu Jul 16 09:53:59 CEST 2020:

letux-5.7.8 Thu Jul  9 11:51:17 CEST 2020:
* ARM64: DTS: Pinephone: fix DTS/DTSI setup for PinePhone-1.0 and -1.1
* iio: adc: axp20x: fix missing "name" attribute in /sys/bus/iio
* rootfs: udev rules: PinePhone: create symlink for /dev/input/touchscreen
* ARM64: letux_defconfig: configure for iio_input_bridge (PinePhone accelerometer)
* rootfs: improve all /root/find* tools to handle devices without 'name', 'id' etc.
* rootfs: PinePhone: fix X11 setup
* ARM64: DTS: Pinephone: make blue LED a heartbeat

letux-5.7.6 Mon Jun 29 13:42:14 CEST 2020:

letux-5.7.5 Mon Jun 22 12:08:45 CEST 2020:

letux-5.7.4 Sun Jun 21 19:59:28 CEST 2020:
* omap5: added support for GC320 and DRI3WSEGL (by David Shah <dave at ds0.me>)
* omap3: off_mode: enable only for gta04 and not openpandora etc.
* gpu: pvrsgxkm fix resource leak (by David Shah <dave at ds0.me>)
* drm: panel-simple: add connector mode DPI for the panel used by Letux3704
* fix for Pyra TILER rotation (by David Shah <dave at ds0.me>)

letux-5.7 Mon Jun  1 10:12:02 CEST 2020:
* hack to ignore errors=remount-ro for ubifs

letux-5.7-rc7 Wed May 27 19:54:27 CEST 2020:
* imx: add epdc v1 driver for Tolino Shine 3
* w1: omap-hdq: a little tidying up for submission to lkml

letux-5.7-rc6 Mon May 18 15:31:31 CEST 2020:
* arm: letux_defconfig: configure networking and crypto kernel modules required for strongSwan
* dt-bindings: img,pvrsgx: add more precise clock specification for omap SoC integration

letux-5.7-rc5 Mon May 11 09:12:36 CEST 2020:
* Letux: rootfs: batt: use scale for RN5T618
* tps6518x: diverse cleanups
* w1: omap-hdq: fix interrupt handling which did show spurious timeouts

letux-5.7-rc4 Mon May  4 19:35:46 CEST 2020:
* fix hdq for gta04
* SGX fixes for omap4470.dtsi

letux-5.7-rc3 Mon Apr 27 10:14:46 CEST 2020:
* aess: fix an issue with changed return value of debugfs_create_u32()
* some changes for sgx bindings and glue (by discussion on LKML)
* fixed letux_defconfig to provide the new drm based panel driver

letux-5.7-rc2 Mon Apr 20 23:04:58 CEST 2020:
* switched letux/jz4780-smp to -v6 because the old one is no longer compile compatible
* fix a compile warning issue in omap-abe-twl6040.c - reported by Stefan Leichter <sle85276 at gmx.de>
* forward port "drm: bridge: simple-bridge: Enable usage with DRM" by Laurent Pinchard
* letux_defconfig: choose DDK 1.17 as default
* improve Letux/scripts/statistics

letux-5.7-rc1 Mon Apr 13 14:16:45 CEST 2020:
* fix some merge conflicts: mostly for PinePhone, some for jz4780/C20
* improve sgxdump to read out SGX version + revision from real hardware
* make BeagleBoard xM + BeagleHybrid LCD work again
* add back code to remove warnings with broken omap2_set_init_voltage()
* small fixes for GTA04A5
* iio: input-bridge: fix potential NULL dereference in iio_device_unregister_inputbridge()
* added DDK 1.17 and bindings support for Exynos s5pv210 - by Jonathan Bakker
* a little work on bq2429x.yaml
* improve img,pvrsgx.yaml
=== more lines cut off ===

Build Warnings
==============
ARM: http://download.goldelico.com/letux-kernel/letux-5.7.18/src/warnings.log
ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.7.18-lpae/src/warnings.log
ARM64: http://download.goldelico.com/letux-kernel/letux-5.7.18-arm64/src/warnings.log
MIPS: http://download.goldelico.com/letux-kernel/letux-5.7.18-l400/src/warnings.log