[Letux-kernel] [PATCH v2 04/11] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card

H. Nikolaus Schaller hns at goldelico.com
Wed Oct 30 18:24:28 CET 2019


Hi Ulf,

> Am 30.10.2019 um 16:51 schrieb Ulf Hansson <ulf.hansson at linaro.org>:
> 
>> +
>> +               np = of_get_compatible_child(np, "ti,wl1251");
>> +               if (np) {
>> +                       /*
>> +                        * We have TI wl1251 attached to MMC3. Pass this information to
>> +                        * SDIO core because it can't be probed by normal methods.
>> +                        */
>> +
>> +                       dev_info(host->dev, "found wl1251\n");
>> +                       card->quirks |= MMC_QUIRK_NONSTD_SDIO;
>> +                       card->cccr.wide_bus = 1;
>> +                       card->cis.vendor = 0x104c;
>> +                       card->cis.device = 0x9066;
>> +                       card->cis.blksize = 512;
>> +                       card->cis.max_dtr = 24000000;
>> +                       card->ocr = 0x80;
> 
> These things should really be figured out by the mmc core during SDIO
> card initialization itself, not via the host ops ->init_card()
> callback. That is just poor hack, which in the long run should go
> away.

Yes, I agree.

But I am just the poor guy who is trying to fix really broken code with
as low effort as possible.

I don't even have a significant clue what this code is exactly doing and what
the magic values mean. They were setup by pandora_wl1251_init_card() in the
same way so that I have just moved the code here and make it called in (almost)
the same situation.

> Moreover, I think we should add a subnode to the host node in the DT,
> to describe the embedded SDIO card, rather than parsing the subnode
> for the SDIO func - as that seems wrong to me.

You mean a second subnode?

The wl1251 is the child node of the mmc node and describes the SDIO card.
We just check if it is a wl1251 or e.g. wl1837 or something else or even
no child.

> To add a subnode for the SDIO card, we already have a binding that I
> think we should extend. Please have a look at
> Documentation/devicetree/bindings/mmc/mmc-card.txt.
> 
> If you want an example of how to implement this for your case, do a
> git grep "broken-hpi" in the driver/mmc/core/, I think it will tell
> you more of what I have in mind.

So while I agree that it should be improved in the long run, we should
IMHO fix the hack first (broken since v4.9!), even if it remains a hack
for now. Improving this part seems to be quite independent and focussed
on the mmc subsystem, while the other patches involve other subsystems.

Maybe should we make a REVISIT note in the code? Or add something to
the commit message about the idea how it should be done right?

> 
>> +                       of_node_put(np);
>> +               }
>> +       }
>> }
>> 
>> static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
>> --
>> 2.19.1
>> 
> 
> Kind regards
> Uffe


BR and thanks,
Nikolaus



More information about the Letux-kernel mailing list