[Letux-kernel] [PATCH v2 00/11] OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again

H. Nikolaus Schaller hns at goldelico.com
Sat Oct 19 20:41:15 CEST 2019

* added acked-by for wl1251 patches - Kalle Valo <kvalo at codeaurora.org>
* really removed old pdata-quirks code (not through #if 0)
* splited out a partial revert of
	efdfeb079cc3b ("regulator: fixed: Convert to use GPIO descriptor only")
  because that was introduced after v4.19 and stops the removal of
  the pdata-quirks patch from cleanly applying to v4.9, v4.14, v4.19
  - reported by Sasha Levin <sashal at kernel.org>
* added a new patch to remove old omap hsmmc since pdata quirks
  were last user - suggested by Tony Lindgren <tony at atomide.com>

PATCH V1 2019-10-18 22:25:39:

Here we have a set of scattered patches to make the OpenPandora WiFi work again.

v4.7 did break the pdata-quirks which made the mmc3 interface
fail completely, because some code now assumes device tree
based instantiation.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")

v4.11 did break the sdio qirks for wl1251 which made the driver no longer
load, although the device was found as an sdio client.

Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file")

To solve these issues:
* we convert mmc3 and wl1251 initialization from pdata-quirks
  to device tree
* we make the wl1251 driver read properties from device tree
* we fix the mmc core vendor ids and quirks
* we fix the wl1251 (and wl1271) driver to use only vendor ids
  from header file instead of (potentially conflicting) local

H. Nikolaus Schaller (11):
  Documentation: dt: wireless: update wl1251 for sdio
  net: wireless: ti: wl1251 add device tree support
  DTS: ARM: pandora-common: define wl1251 as child node of mmc3
  mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid
    of pandora_wl1251_init_card
  omap: pdata-quirks: revert pandora specific gpiod additions
  omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251
  omap: remove old hsmmc.[ch] and in Makefile
  mmc: sdio: fix wl1251 vendor id
  mmc: core: fix wl1251 sdio quirks
  net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition
  net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions

 .../bindings/net/wireless/ti,wl1251.txt       |  26 +++
 arch/arm/boot/dts/omap3-pandora-common.dtsi   |  37 +++-
 arch/arm/mach-omap2/Makefile                  |   1 -
 arch/arm/mach-omap2/hsmmc.c                   | 171 ------------------
 arch/arm/mach-omap2/hsmmc.h                   |  32 ----
 arch/arm/mach-omap2/pdata-quirks.c            | 105 -----------
 drivers/mmc/core/quirks.h                     |   7 +
 drivers/mmc/host/omap_hsmmc.c                 |  21 +++
 drivers/net/wireless/ti/wl1251/sdio.c         |  23 ++-
 drivers/net/wireless/ti/wlcore/sdio.c         |   8 -
 include/linux/mmc/sdio_ids.h                  |   2 +
 11 files changed, 105 insertions(+), 328 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/hsmmc.c
 delete mode 100644 arch/arm/mach-omap2/hsmmc.h


More information about the Letux-kernel mailing list