[Letux-kernel] LetuxOS: Kernel: m-rc 5.4-rc3 successful

H. Nikolaus Schaller hns at goldelico.com
Fri Oct 18 18:00:47 CEST 2019


KVERSION: 5.4-rc3
CONFIGS:  arch/arm/configs/letux_defconfig arch/arm/configs/letux_lpae_defconfig arch/mips/configs/letux_defconfig

Infos
=====
Project Home: http://projects.goldelico.com/p/gta04-kernel/
Issues: http://projects.goldelico.com/p/gta04-kernel/issues/

Downloads
=========
git: http://git.goldelico.com/?p=letux-kernel.git;a=shortlog;h=refs/heads/letux-5.4-rc3
ARM: http://download.goldelico.com/letux-kernel/letux-5.4-rc3
ARM-LPAE: http://download.goldelico.com/letux-kernel/letux-5.4-rc3-lpae
MIPS: http://download.goldelico.com/letux-kernel/letux-5.4-rc3-l400

recent CHANGES (http://download.goldelico.com/letux-kernel/letux-5.4-rc3/src/CHANGES)
==============
letux-5.4-rc3 Fri Oct 18 16:05:46 CEST 2019:
* streamline and improve bq2429x driver
* fixes for jz4730
* improve sgxdemo to install user-space libs if needed
* split sgx glue code into patch set by others which is already/almost in linux-next and our own work
* make pandora wl1251 to have stable wlan interface numbers by fixing DT handling
* fix some iisues in sgx DT nodes
* improve sgxdump
* integrate latest rstctl, sysctl etc. patches for SGX
* fix pandora sdio / wl1251 detection and firmware load
* fix gta04 and openpandora spi panels

letux-5.4-rc2 Mo  7 Okt 2019 19:11:52 CEST:
* fix for sgxdump to better detect/handle omap3430 and omap3630 (and others)
* Letux/rootfs: add ip-forwarding.sh script to setup host where a LetuxOS device is connected to
* apply upstream fix for boot issue (__always_inlineand OPTIMIZE_FOR_SIZE)
* fix for Letux 3704/Letux 7004 panel (display timing in DTS)

letux-5.4-rc1 Mi  2 Okt 2019 16:20:48 CEST:
!!! does not completely boot on GTA04. Other platforms untested.
* compile fixes for sortextable on Darwin, extcon-gpio
* fixes merge conflicts in: letux/tsc2007-v11, letux/iio-mount-matrix-v3, letux/panels+ssd2858-v2 (panels moved to drivers/gpu/drm/panel), letux/omap-pvr-soc-glue-v3, letux/latest-pvr, letux/omap-pvr, letux/am335x-hwmon, letux/jz4730 (code likely broken now), letux/extcon-v2, letux/pyra-minimal
* letux/omap-pvr-soc-glue-v3: fixes to make omap4 version (almost) work (Pandaboard)
* pandora device tree and omap_hsmmc + mach-omap2/pdata-quirks: add (still incomplete) fix for Pandora WiFi
* Letux/rootfs: charger: increase twl4030 charging current on AC port (Pandora)
* letux/omap-pvr-soc-glue-v3: include latest sysc and reset-controller patches from linux-next and https://github.com/t-kristo/linux-pm.git
* Letux/rootfs: update sgxdump and rename gpu-demo to sgxdemo
* Letux/rootfs: new method to detect panel and set up xorg.conf
* letux/vcnl4000: change to use SELFTIMED for vcnl4010
* reinstall "libertas: disable pm_ops" otherwise we have 200mA on GTA04 in suspend

letux-5.3 Mo 16 Sep 2019 07:39:33 CEST:
* revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware."
* add some new RasPi 3B+ defconfigs
* letux/omap3-opp-v4: properly control omap36xx ABB LDO for OPP1G
* letux/omap3-opp-v4: do thermal management (limit TJ to 90°C)
* RasPi: setup gpio3 as KEY_POWER
* RasPi: build drivers for WLAN
* configure for CONFIG_CRYPTO_DEV_OMAP
* fix DTS for Letux3704 and Letux7004 to handle panel backlight
* twl4030_charger: handle negative current_now
* Letux: rootfs: temperatures: also find cpu-thermal on RasPi

letux-5.1-next, letux-5.2-next:
* revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware."
* add some new RasPi 3B+ defconfigs

letux-5.3-rc8:
* pyra-mainboard: invert lid sensor polarity
* letux/omap-pvr-soc-glue-v2: update to add proper sgx child nodes - works on Pyra
* letux/omap3-opp-v3: some updates by discussions on LKML
* mergefile: merge letux/omap3-opp
* letux/rootfs: make volumd do better checks; fix systemd config to use letux-panel-setup.service instead of tiler.service to make display work with Debian Stretch 

letux-4.19-next, letux-5.2-next:
* pyra-mainboard: invert lid sensor polarity

letux-5.3-rc7:
* letux/omap2plus: clean up "Strange things happening with latest kernels"
* letux/omap3-opp-v2: new branch (not merged) with work in progress to support omap3 720MHz/1GHz OPPs
* letux/omap-sgx-glue: new branch (not merged) with new SOC glue for SGX from Tony

letux-5.3-rc6:
* letux/omap2plus: added "gpio: of: fix Freescale SPI CS quirk handling" to make GTA04 panel work again
* letux/omap2plus: added "regulator: twl: voltage lists for vdd1/2 on twl4030"

letux-5.3-rc5:
* letux/latest-pvr: made SGX DDK1.14 working on 5.3-rc (at least as LPAE build for OMAP5)

letux-4.19-next, letux-5.2-next:
* letux/latest-pvr: add latest SGX DDK1.14 driver and made working (at least as LPAE build for OMAP5)

letux-5.3-rc4:
* hack to revert "arm: use swiotlb for bounce buffering on LPAE configs" because it breaks omapdrm in LPAE compile
* letux/rootfs: new tool mount-boot
* letux/tiler: fixes for omap5 tiler (but still only working for 0°)
* letux/rootfs: switch /e/n/i to a better DNS server
* letux/latest-pvr: fix make clean for PVR/SGX
* letux/latest-pvr: work on Makefile so that we can build DDK1.14 for DRM

=== more cut off ===


More information about the Letux-kernel mailing list