[Letux-kernel] [PATCH v5 0/5] Add rtc support for rn5t618 mfd

Andreas Kemnade andreas at kemnade.info
Fri Dec 20 13:24:11 CET 2019

In the variant RC5T619 the mfd has an RTC. This patchset adds
support for it. To do so it adds the missing register defines in 
rn5t618.h and general irq handling for that.
It seems that the irq definitions are the same except missing RTC
but due to missing ability to test that I do not add them here.

The rtc driver itself is based on 
but heavily reworked.

It was tested on the Kobo Clara HD.

For cleaning up there is a separate off-topic patch:
mfd: rn5t618: cleanup i2c_device_id

Changes in v5:
- static rn5t618_irq_init
- added some Acked-Bys

Changes in v4:
- use macros for IRQ definitions
- merge rn5t618-core.c and rn5t618-irq.c

Changes in v3:
- alignment cleanup
- output cleanup, remove useless toggling of alarm flag in rtc probe
- updated bindings description, so patch 1/5 becomes 2/6 and so on

Changes in v2:
- no dead code in irq code
- various improvements and cleanups in rtc driver itself

Andreas Kemnade (5):
  dt-bindings: mfd: rn5t618: Document optional property interrupts
  mfd: rn5t618: add IRQ support
  mfd: rn5t618: add RTC related registers
  mfd: rn5t618: add more subdevices
  rtc: rc5t619: add ricoh rc5t619 RTC driver

 Documentation/devicetree/bindings/mfd/rn5t618.txt |   4 +
 drivers/mfd/Kconfig                               |   1 +
 drivers/mfd/rn5t618.c                             | 109 +++++-
 drivers/rtc/Kconfig                               |  10 +
 drivers/rtc/Makefile                              |   1 +
 drivers/rtc/rtc-rc5t619.c                         | 444 ++++++++++++++++++++++
 include/linux/mfd/rn5t618.h                       |  26 ++
 7 files changed, 593 insertions(+), 2 deletions(-)
 create mode 100644 drivers/rtc/rtc-rc5t619.c


More information about the Letux-kernel mailing list