[Letux-kernel] [PATCH v3 3/6] mfd: rn5t618: add irq support

Lee Jones lee.jones at linaro.org
Wed Dec 11 08:50:21 CET 2019


On Tue, 10 Dec 2019, Andreas Kemnade wrote:

> On Tue, 10 Dec 2019 09:32:25 +0000
> Lee Jones <lee.jones at linaro.org> wrote:
> 
> > On Fri, 29 Nov 2019, Andreas Kemnade wrote:
> > 
> > > This adds support for irq handling in the rc5t619 which is required  
> > 
> > Please capitalise abbreviations and device names (as they do in the
> > datasheet).
> > 
> for IRQ vs. irq: I see both things in commit messages. Is there any rule about
> that?

No, it's preference.  Mine is to follow the conventions set out by
standard English grammar.  Capital letters to start sentences, proper
nouns and abbreviations, etc.

> > > for properly implementing subdevices like rtc.  
> > 
> > "RTC"
> > 
> > > For now only definitions for the variant rc5t619 are included.
> > > 
> > > Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
> > > ---
> > > Changes in v3:
> > > alignment cleanup
> > > 
> > > Changes in v2:
> > > - no dead code, did some more testing and thinking for that
> > > - remove extra empty lines
> > > 
> > >  drivers/mfd/Kconfig         |  1 +
> > >  drivers/mfd/Makefile        |  2 +-
> > >  drivers/mfd/rn5t618-core.c  | 34 ++++++++++++++-
> > >  drivers/mfd/rn5t618-irq.c   | 85 +++++++++++++++++++++++++++++++++++++
> > >  include/linux/mfd/rn5t618.h | 16 +++++++
> > >  5 files changed, 136 insertions(+), 2 deletions(-)
> > >  create mode 100644 drivers/mfd/rn5t618-irq.c
> > > 
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index ae24d3ea68ea..522e068d0082 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1057,6 +1057,7 @@ config MFD_RN5T618
> > >  	depends on OF
> > >  	select MFD_CORE
> > >  	select REGMAP_I2C
> > > +	select REGMAP_IRQ
> > >  	help
> > >  	  Say yes here to add support for the Ricoh RN5T567,
> > >  	  RN5T618, RC5T619 PMIC.
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index 110ea700231b..2906d5db67d0 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -217,7 +217,7 @@ obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
> > >  obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
> > >  obj-$(CONFIG_MFD_RK808)		+= rk808.o
> > >  
> > > -rn5t618-objs			:= rn5t618-core.o
> > > +rn5t618-objs			:= rn5t618-core.o rn5t618-irq.o
> > >  obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
> > >  obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
> > >  obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
> > > diff --git a/drivers/mfd/rn5t618-core.c b/drivers/mfd/rn5t618-core.c
> > > index da5cd9c92a59..1e2326217681 100644
> > > --- a/drivers/mfd/rn5t618-core.c
> > > +++ b/drivers/mfd/rn5t618-core.c
> > > @@ -8,6 +8,7 @@
> > >  
> > >  #include <linux/delay.h>
> > >  #include <linux/i2c.h>
> > > +#include <linux/interrupt.h>
> > >  #include <linux/mfd/core.h>
> > >  #include <linux/mfd/rn5t618.h>
> > >  #include <linux/module.h>
> > > @@ -105,7 +106,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
> > >  
> > >  	i2c_set_clientdata(i2c, priv);
> > >  	priv->variant = (long)of_id->data;
> > > -
> > > +	priv->chip_irq = i2c->irq;
> > > +	priv->dev = &i2c->dev;  
> > 
> > '\n'
> > 
> > >  	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
> > >  	if (IS_ERR(priv->regmap)) {
> > >  		ret = PTR_ERR(priv->regmap);
> > > @@ -137,6 +139,11 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
> > >  		return ret;
> > >  	}
> > >  
> > > +	if (priv->chip_irq > 0) {
> > > +		if (rn5t618_irq_init(priv))
> > > +			priv->chip_irq = 0;
> > > +	}
> > > +
> > >  	return 0;
> > >  }
> > >  
> > > @@ -154,15 +161,40 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
> > >  	return 0;
> > >  }
> > >  
> > > +static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
> > > +{
> > > +	struct rn5t618 *priv = dev_get_drvdata(dev);
> > > +
> > > +	if (priv->chip_irq)
> > > +		disable_irq(priv->chip_irq);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
> > > +{
> > > +	struct rn5t618 *priv = dev_get_drvdata(dev);
> > > +
> > > +	if (priv->chip_irq)
> > > +		enable_irq(priv->chip_irq);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  static const struct i2c_device_id rn5t618_i2c_id[] = {
> > >  	{ }
> > >  };
> > >  MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);  
> > 
> > Not this patch I know, but it's strange to see this empty.
> 
> Yes, should be cleaned up. For now the device tree stuff seems to kick in.

I think this can be removed completely.

Just make sure you use .probe2 and it should be automatic.

[...]

> > > +	switch (rn5t618->variant) {
> > > +	case RC5T619:
> > > +		irq_chip = &rc5t619_irq_chip;
> > > +		break;
> > > +
> > > +		/* TODO: check irq definitions for other variants */  
> > 
> > No need for this.  It's implied.
> > 
> > OOI, when support for more variants be added?
> > 
> I have done research about the RN5T618. It has just the RTC IRQ missing, I could just
> add the table for it to prepare the path for others. I cannot test it but
> since there are no users yet, it does not harm that it is not well-tested.

If there are no users and it can't be tested, it should be left out.
We don't want potentially broken, untested code with no users in the
kernel.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


More information about the Letux-kernel mailing list