[Letux-kernel] Kernel work

Andreas Kemnade andreas at kemnade.info
Sat Aug 31 21:35:59 CEST 2019


On Sat, 31 Aug 2019 21:25:41 +0200
"H. Nikolaus Schaller" <hns at goldelico.com> wrote:

> Hi Andreas,
> 
> > Am 31.08.2019 um 21:21 schrieb Andreas Kemnade <andreas at kemnade.info>:
> > 
> > Hi,
> > 
> > On Sat, 31 Aug 2019 14:01:02 +0200
> > "H. Nikolaus Schaller" <hns at goldelico.com> wrote:
> >   
> >> Hi,
> >> as some of you have noticed, the goldelico.com server was not
> >> reachable any more. The VPN tunnel server was stuck in a state
> >> that was not detected by the monitor process...
> >> Because of this I may have lost some mails.
> >> 
> >> So, please can someone update me on the latest news, questions,
> >> discussions, problems, progress?
> >>   
> > from my side: 
> > I replaced the protection circuit of that pseudobattery. Seems to run
> > stable. So I can probably more easily run a git bisect on the gta04a5.
> > Just switch usb and the JST plug to the gta04a5. 
> > I am still missing a proper micro-usb plug for the pyra where I can
> > abuse the Debug id line, so I can also git bisect run the pyra.  
> 
> That sounds interesting. What do you need there? Maybe I can build
> something.
> 
Well, the idea would be to put a transistor parallel to the on
switch.
And then control the switch via the id pin of the debug usb port.
But for that I need a usb plug where I can connect 5 wires and I only
have some with contacts for 4 wires.

Regards,
Andreas


More information about the Letux-kernel mailing list