[Letux-kernel] [PATCH] arm: dts: gta04: enable inputs/mcbsp1 pinux

Andreas Kemnade andreas at kemnade.info
Sat Nov 24 12:15:27 CET 2018


To ensure proper clock handling, the mcbsp1 seems to need
some feedback on its clocks, so enable inputs.

Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
---
Replaces: dtb: gta04: fix mcbsp1 fsr setting

 arch/arm/boot/dts/omap3-gta04.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 4e15137ae08a..2d6222625e19 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -415,14 +415,14 @@
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
 			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
 			/* mcbsp_clks is used as PENIRQ */
 			/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp_clks */
-			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT_PULLUP | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
 		>;
 	};
 
-- 
2.11.0



More information about the Letux-kernel mailing list