[Letux-kernel] DSI & DPI panels with omapdrm on 4.20-rc

[Tomi Valkeinen]

On 14/11/18 12:42, H. Nikolaus Schaller wrote:
> Hi Tomi,
> I now also have a problem with a DPI panel on an OMAP3.
> 
> Here is the DT definition which works up to 4.19.1:
> 
> 	aliases {
> 		display0 = &lcd_b2;
> 		display1 = &tv0;
> 	};
> 
> 	lcd_b2: lcd {
> 		compatible =	"ortustech,com37h3m05dtc",
> 				"ortustech,com37h3m099dtc",
> 				"panel-dpi";
> 		label = "lcd";
> 		enable-gpios = <&gpio1 20 0>;
> 
> 		panel-timing {
> 			clock-frequency = <22153000>;
> 
> 			hback-porch = <10>;
> 			hactive = <480>;
> 			hfront-porch = <8>;
> 			hsync-len = <10>;
> 
> 			vback-porch = <4>;
> 			vactive = <640>;
> 			vfront-porch = <4>;
> 			vsync-len = <3>;
> 
> 			hsync-active = <0>;
> 			vsync-active = <0>;
> 			de-active = <1>;
> 			pixelclk-active = <1>;
> 
> 		};
> 
> 		port {
> 			lcd_b2_in: endpoint {
> 				remote-endpoint = <&dpi_out>;
> 			};
> 		};
> 	};
> 
> &dss {
> 	pinctrl-names = "default";
> 	pinctrl-0 = < &dss_dpi_pins >;
> 
> 	status = "okay";
> 
> 	port {
> 		dpi_out: endpoint {
> 			remote-endpoint = <&lcd_b2_in>;
> 			data-lines = <24>;
> 		};
> 	};
> };
> 
> 
> The Panel basically works but the picture repeats the first column in all
> columns of the left half of the screen.

Can you get a dispc regdump for working and non-working cases?

 Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki