[Letux-kernel] [PATCH letux 0/3] GTA04A3/4 Bluetooth via serdev

Andreas Kemnade andreas at kemnade.info
Sun Nov 11 20:49:04 CET 2018


This frees us from needing hciattach. 

On mainline it requires ifconfig wlan0 up, because a
powerseq patch is missing. hciconfig hci0 up will only work then
Proper close/open of the serial device when not needed
is not included, nobody seems to do it now, so it is a general
thing, so you have to use rmmod hci_uart. 

Andreas Kemnade (3):
  bluetooth: add uart h4 devices via serdev/devicetree
  bluetooth: add regulators for h4 serdevs
  arm: dts: gta04: add bluetooth serdev

 arch/arm/boot/dts/omap3-gta04.dtsi |  6 +++
 drivers/bluetooth/hci_h4.c         | 94 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 100 insertions(+)

-- 
2.11.0



More information about the Letux-kernel mailing list