[Letux-kernel] [PATCH v2 0/3] mach-omap2: handle autoidle denial

Andreas Kemnade andreas at kemnade.info
Sat Nov 10 21:31:12 CET 2018

On the gta04 with a dm3730 omap_hdq does not work properly when the
device enters lower power states. Idling uart1 and 2 is enough
to show up that problem, if there are no other things enabled.
Further research reveals that hdq iclk must not be turned off during
transfers, also according to the TRM. That fact is also correctly described
in the flags but the code to handle that is incomplete.

To handle multiple users of a single ick, autoidle is disabled
when a user of that ick requires that (has the OCPIF_SWSUP_IDLE))

Changes since v1:
- uses spinlocks instead of mutexes
- invert counter logic
- check whether clock type is basic

Andreas Kemnade (3):
  clk: ti: add a usecount for autoidle
  clk: ti: check clock type before doing autoidle ops
  arm: omap_hwmod disable ick autoidling when a hwmod requires that

 arch/arm/mach-omap2/omap_hwmod.c | 16 ++++++++++----
 drivers/clk/ti/autoidle.c        | 48 +++++++++++++++++++++++++++++++---------
 include/linux/clk/ti.h           |  1 +
 3 files changed, 51 insertions(+), 14 deletions(-)


More information about the Letux-kernel mailing list