[Letux-kernel] [PATCH RFC] ehci-omap: simple suspend implementation

[Andreas Kemnade]

On Fri, 16 Feb 2018 13:13:11 -0500 (EST)
Alan Stern <stern at rowland.harvard.edu> wrote:

> On Fri, 16 Feb 2018, Andreas Kemnade wrote:
> 
> > This powers down the phy and on a gta04 it reduces
> > suspend current by 13 mA.
> > For unknown reasons usb does not power on properly.
> > Also calling usb_phy_shutdown() here feels wrong
> > apparently the reset line has to be activated.
> > usb_phy_set_suspend is not enough here. The power
> > consumption still stays approximately the same as
> > without any patch.
> > 
> > With a device connected the device does not enumerate
> > after resume. A rmmod ehci-omap ; modprobe ehci-omap
> > does not make it reenumerade.
> > So there is still something wrong here.
> > 
> > Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
> > ---
> >  drivers/usb/host/ehci-omap.c | 59 ++++++++++++++++++++++++++++++++++++++++++--
> >  1 file changed, 57 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> > index 8d8bafc70c1f..0be2ccf8182a 100644
> > --- a/drivers/usb/host/ehci-omap.c
> > +++ b/drivers/usb/host/ehci-omap.c
> > @@ -266,6 +266,58 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
> >  	return 0;
> >  }
> >  
> > +
> > +static int __maybe_unused ehci_omap_suspend(struct device *dev)
> > +{
> > +	struct usb_hcd *hcd = dev_get_drvdata(dev);
> > +	struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
> > +	int ret;
> > +	int i;
> > +
> > +	ret = ehci_suspend(hcd, false);
> > +	if (ret) {
> > +		dev_err(dev, "ehci suspend failed: %d\n", ret);
> > +		return ret;
> > +	}
> > +	for (i = 0; i < omap->nports; i++) {
> > +		if (omap->phy[i])
> > +			usb_phy_shutdown(omap->phy[i]);
> > +	}
> > +	pm_runtime_put_sync(dev);  
> 
> Why do you include a runtime PM call here, given that the driver
> doesn't support runtime suspend or resume?
> 
Well, the parent (drivers/mfd/omap-usb-host.c) has, and there are runtime PM
calls here in the _probe/_remove functions, so it seems to be sane to do it
here, too.


> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused ehci_omap_resume(struct device *dev)
> > +{
> > +	struct usb_hcd *hcd = dev_get_drvdata(dev);
> > +	struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
> > +	int i;
> > +
> > +	pm_runtime_get_sync(dev);
> > +	/*
> > +	 * An undocumented "feature" in the OMAP3 EHCI controller,
> > +	 * causes suspended ports to be taken out of suspend when
> > +	 * the USBCMD.Run/Stop bit is cleared (for example when
> > +	 * we do ehci_bus_suspend).
> > +	 * This breaks suspend-resume if the root-hub is allowed
> > +	 * to suspend. Writing 1 to this undocumented register bit
> > +	 * disables this feature and restores normal behavior.
> > +	 */
> > +	ehci_write(hcd->regs, EHCI_INSNREG04,
> > +		   EHCI_INSNREG04_DISABLE_UNSUSPEND);  
> 
> Doesn't this code belong in ehci_hcd_omap_probe()?  I assume you only
> need to set this undocumented bit once, not every time the controller
> is suspended.  And in any case, according to the comment, you would
> need to take care of this before the root hub is suspended -- by the
> time the controller is suspended, it is already too late.
>
 
I am not really sure about this one. It is set in ehci_hcd_omap_probe()
so it is set before suspend. I set it here to ensure it is re-set when
the controller is powered down too much to keep register contents. I
do not know if that is the case. But I thought it would not harm.

Regards,
Andreas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.goldelico.com/pipermail/letux-kernel/attachments/20180216/bdcfa66a/attachment.asc>