[Letux-kernel] [PATCH] usb: musb: fix enumeration after resume

Bin Liu b-liu at ti.com
Tue Feb 6 19:46:05 CET 2018


Hi,

On Sat, Jan 27, 2018 at 09:34:03AM +0100, Andreas Kemnade wrote:
> On dm3730 there are enumeration problems after resume.
> Investigation led to the cause that the MUSB_POWER_SOFTCONN
> bit is not set. If it was set before suspend (because it
> was enabled via musb_pullup()), it is set in
> musb_restore_context() so the pullup is enabled. But then
> musb_start() is called which overwrites MUSB_POWER and
> therefore disables MUSB_POWER_SOFTCONN, so no pullup is
> enabled and the device is not enumerated.
 
Do you see the issue with the v4.15?

> So let's do a subset of what musb_start() does
> in the same way as musb_suspend() does it. Platform-specific
> stuff it still called as there might be some phy-related stuff
> which needs to be enabled.
> Also interrupts are enabled, as it was the original idea
> of calling musb_start() in musb_resume() according to
> Commit 6fc6f4b87cb3 ("usb: musb: Disable interrupts on suspend,
> enable them on resume")

The logic in the fix makes sense, and I do see the same problem with
AM335x on v4.9 kernel, but it doesn't happen on v4.15. I haven't checked
if there is anything after musb_start() which sets MUSB_POWER_SOFTCON
bit.

Regards,
-Bin.


More information about the Letux-kernel mailing list