[Letux-kernel] Letux U-Boot 2016.11 for GTA04
H. Nikolaus Schaller
hns at goldelico.com
Wed Jan 11 08:31:49 CET 2017
Hi Andreas,
> Am 10.01.2017 um 23:19 schrieb Andreas Kemnade <andreas at kemnade.info>:
>
> Hi,
>
> I tried an older one,
> now I get this far:
>
> Found GTA04A4
> Device Tree: omap3-gta04a4+b2.dtb
> Net: usb_ether
> Error: usb_ether address not set.
>
> Hit any key to stop autoboot: 0
> GTA04b2 #
> GTA04b2 # mmc rescan
> GTA04b2 # load mmc 0:2 ${fdtaddr} /boot/${fdtfile}
> 74557 bytes read in 30 ms (2.4 MiB/s)
> GTA04b2 # load mmc 0:1 ${loadaddr} /zImage
> reading /zImage
> 4605976 bytes read in 356 ms (12.3 MiB/s)
> GTA04b2 # run mmcargs
> GTA04b2 # echo ${fdtfile}
> omap3-gta04a4+b2.dtb
> GTA04b2 # echo ${ver}
> U-Boot 2016.11-01252-g8ffa558 (Jan 10 2017 - 22:23:45 +0100)
looks good!
> GTA04b2 # bootz ${loadaddr} - ${fdtaddr}
> ## Flattened Device Tree blob at 80f80000
> Booting using the fdt blob at 0x80f80000
> Using Device Tree in place at 80f80000, end 80f9533c
>
> Starting kernel ...
>
>
> Error: unrecognized/unsupported machine ID (r1 = 0x00000bcb).
>
> Available machine support:
>
> ID (hex) NAME
> ffffffff Generic DT based system
> ffffffff Generic DRA72X (Flattened Device Tree)
> ffffffff Generic DRA74X (Flattened Device Tree)
> ffffffff Generic AM43 (Flattened Device Tree)
> ffffffff Generic OMAP5 (Flattened Device Tree)
> ffffffff Generic OMAP4 (Flattened Device Tree)
> ffffffff Generic AM33XX (Flattened Device Tree)
> ffffffff Generic AM3517 (Flattened Device Tree)
> ffffffff Generic OMAP3-GP (Flattened Device Tree)
> ffffffff Generic OMAP36xx (Flattened Device Tree)
> ffffffff Generic OMAP3 (Flattened Device Tree)
> ffffffff Nokia RX-51 board
>
> Please check your kernel config and/or bootloader.
>
>
>
>
> Any hints? I tried to update kernel and dtb. So what is still wrong
> here?
Hm. I have never seen that. Seems to be a message from the kernel.
And what I wonder is why there are only ffff IDs.
Is this a linux-next? Maybe they have removed all IDs but not the
check?
> The boot-gta04.txt produces a lot of errors. I also tried load ..
> uImage and bootm ...
boot-gta04.txt should be converted into a boot.scr.
Here is some binary:
http://download.goldelico.com/letux-u-boot/Letux-3704/2017-01-11/
Maybe I should add a note to the source code that it should
be converted and named "boot.scr".
BR,
Nikolaus
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.goldelico.com/pipermail/letux-kernel/attachments/20170111/f9959cd8/attachment-0001.asc>
More information about the Letux-kernel
mailing list