[Letux-kernel] dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation

H. Nikolaus Schaller hns at goldelico.com
Tue Aug 29 16:24:19 CEST 2017


Hi Liam,
seems to work as expected :)

First boot:

[    6.096336] bq27xxx_battery_settings
[    6.097987] bq27xxx_battery_set_config
[    6.097990] bq27xxx_battery_unseal
[    6.107987] bq27xxx-battery 1-0055: update design-capacity to 6000
[    6.107992] bq27xxx-battery 1-0055: update design-energy to 22200
[    6.107997] bq27xxx-battery 1-0055: terminate-voltage has 3200
[    6.382048] bq27xxx-battery 1-0055: cfgupdate 0, retries 7
[    6.382054] bq27xxx_battery_seal

Second boot (w/o removing battery in between):

[    6.008883] bq27xxx_battery_settings
[    6.013280] bq27xxx_battery_set_config
[    6.018761] bq27xxx_battery_unseal
[    6.050694] bq27xxx-battery 1-0055: design-capacity has 6000
[    6.059913] bq27xxx-battery 1-0055: design-energy has 22200
[    6.067113] bq27xxx-battery 1-0055: terminate-voltage has 3200
[    6.075803] bq27xxx_battery_seal

Third boot (with removing battery in between):

[    6.161085] bq27xxx_battery_settings
[    6.161162] bq27xxx_battery_set_config
[    6.161165] bq27xxx_battery_unseal
[    6.177904] bq27xxx-battery 1-0055: update design-capacity to 6000
[    6.177909] bq27xxx-battery 1-0055: update design-energy to 22200
[    6.177914] bq27xxx-battery 1-0055: terminate-voltage has 3200
[    6.440592] bq27xxx-battery 1-0055: cfgupdate 0, retries 7
[    6.440597] bq27xxx_battery_seal

(I have added some printk to trace seal/unseal etc.)

Values match the 6000mAh specified by DT:

	bat: battery {
		compatible = "simple-battery", "pyra-battery";
		voltage-min-design-microvolt = <3200000>;
		energy-full-design-microwatt-hours = <22200000>;
		charge-full-design-microamp-hours = <6000000>;
	};

root at letux:~# cat /sys/class/power_supply/bq27421-0/uevent 
POWER_SUPPLY_NAME=bq27421-0
POWER_SUPPLY_STATUS=Discharging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3943000
POWER_SUPPLY_CURRENT_NOW=-634000
POWER_SUPPLY_CAPACITY=82
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=319
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=5467000
POWER_SUPPLY_CHARGE_NOW=4611000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_MANUFACTURER=Texas Instruments
root at letux:~# 

Anything else I should test?

BR and thanks,
Nikolaus


> Am 29.08.2017 um 12:40 schrieb Liam Breck <liam at networkimprov.net>:
> 
> Hi Nikolaus,
> 
> You need the patchset which enables this feature, which was delayed
> for further work. It's now ready...
> 
> https://patchwork.kernel.org/patch/9918947/
> https://patchwork.kernel.org/patch/9918949/
> https://patchwork.kernel.org/patch/9918951/
> https://patchwork.kernel.org/patch/9918953/
> https://patchwork.kernel.org/patch/9918955/
> 
> And flip the #if 0 protecting bq27421_dm_regs
> 
> I'd love to support that chip in this patchset if you can test
> non-default settings for all 3 options this week?
> 
> Thanks,
> Liam
> 
> 
> On Tue, Aug 29, 2017 at 2:43 AM, H. Nikolaus Schaller <hns at goldelico.com> wrote:
>> Hi,
>> I am trying to get this working on our bq27421.
>> 
>> But the only message I get is:
>> 
>> [    6.086407] bq27xxx-battery 1-0055: data memory update not supported for chip
>> 
>> A little research shows that this message comes from
>> 
>>        http://elixir.free-electrons.com/linux/v4.13-rc7/source/drivers/power/supply/bq27xxx_battery.c#L1279
>> 
>> So di->dm_regs is NULL.
>> 
>> But doing an fgrep for dm_regs shows no line of code where the pointer is set to a non-null value:
>> 
>> master hns$ fgrep -R dm_regs *
>> drivers/power/supply/bq27xxx_battery.c: .class = (di)->dm_regs[i].subclass_id, \
>> drivers/power/supply/bq27xxx_battery.c: .block = (di)->dm_regs[i].offset / BQ27XXX_DM_SZ, \
>> drivers/power/supply/bq27xxx_battery.c: struct bq27xxx_dm_reg *reg = &di->dm_regs[reg_id];
>> drivers/power/supply/bq27xxx_battery.c: if (!di->dm_regs) {
>> drivers/power/supply/bq27xxx_battery.c: max = di->dm_regs[BQ27XXX_DM_DESIGN_ENERGY].max;
>> drivers/power/supply/bq27xxx_battery.c: max = di->dm_regs[BQ27XXX_DM_DESIGN_CAPACITY].max;
>> drivers/power/supply/bq27xxx_battery.c: min = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].min;
>> drivers/power/supply/bq27xxx_battery.c: max = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].max;
>> Binary file drivers/power/supply/bq27xxx_battery.ko matches
>> Binary file drivers/power/supply/bq27xxx_battery.o matches
>> Binary file drivers/power/supply/bq27xxx_battery_i2c.ko matches
>> Binary file drivers/power/supply/bq27xxx_battery_i2c.o matches
>> include/linux/power/bq27xxx_battery.h:  struct bq27xxx_dm_reg *dm_regs;
>> master hns$
>> 
>> What am I doing wrong here?
>> 
>> BR and thanks,
>> Nikolaus
>> 



More information about the Letux-kernel mailing list