[Letux-kernel] mainline 4.7-rc2 nand probed without problems
Belisko Marek
marek.belisko at gmail.com
Tue Jun 7 22:32:25 CEST 2016
Hi Nikolaus,
On Tue, Jun 7, 2016 at 9:40 PM, H. Nikolaus Schaller <hns at goldelico.com> wrote:
> Hi Marek,
>
>> Am 07.06.2016 um 21:35 schrieb Belisko Marek <marek.belisko at gmail.com>:
>>
>> Hi,
>>
>> I've tested mainline 4.7-rc2 and it boots fine on gta04. Nand is
>> probed and cannot see crash in gpio. Really strange. I think it's time
>> for bisecting ;)
>
> Did you use our device tree and config?
Nope I've used everything from mainline.
>
> I am just rebasing our tree to -rc2. Will need some more minutes :)
>
> So you can then revert the hack and check if it still panics. If it doesn't,
> it was a bug in mainline -rc1 that is already fixed by mainline -rc2.
>
> If it does, it is something in our extensions.
Yes I think it's the issue on our extension somewhere.
>
> BR,
> Nikolaus
BR,
marek
>
>>
>>
>> ## Booting kernel from Legacy Image at 82000000 ...
>> Image Name: Linux-4.7.0-rc2-00007-g43c082e-d
>> Image Type: ARM Linux Kernel Image (uncompressed)
>> Data Size: 3804928 Bytes = 3.6 MiB
>> Load Address: 80008000
>> Entry Point: 80008000
>> Verifying Checksum ... OK
>> ## Flattened Device Tree blob at 85000000
>> Booting using the fdt blob at 0x85000000
>> Loading Kernel Image ... OK
>> OK
>> Loading Device Tree to 8ffec000, end 8ffff45b ... OK
>>
>> Starting kernel ...
>>
>> [ 0.000000] Booting Linux on physical CPU 0x0
>> [ 0.000000] Linux version 4.7.0-rc2-00007-g43c082e-dirty
>> (marek at marek-mbp) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu1)
>> ) #1 SMP Tue Jun 7 21:23:53 CEST 2016
>> [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
>> instruction cache
>> [ 0.000000] Machine model: Goldelico GTA04A4
>> [ 0.000000] cma: Reserved 16 MiB at 0x9e800000
>> [ 0.000000] Memory policy: Data cache writeback
>> [ 0.000000] On node 0 totalpages: 130560
>> [ 0.000000] free_area_init_node: node 0, pgdat c0cb9900,
>> node_mem_map df971000
>> [ 0.000000] Normal zone: 1152 pages used for memmap
>> [ 0.000000] Normal zone: 0 pages reserved
>> [ 0.000000] Normal zone: 130560 pages, LIFO batch:31
>> [ 0.000000] CPU: All CPU(s) started in SVC mode.
>> [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
>> [ 0.000000] percpu: Embedded 15 pages/cpu @df8f1000 s29440 r8192
>> d23808 u61440
>> [ 0.000000] pcpu-alloc: s29440 r8192 d23808 u61440 alloc=15*4096
>> [ 0.000000] pcpu-alloc: [0] 0
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 129408
>> [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug
>> earlyprintk mpurate=800 mux=GTA04A3+ vram=12M omapfb.vram=0:8M,1:4M
>> omapfb.mode=dvi:1024x768MR-16 at 60 omapdss.def_dist
>> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
>> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>> [ 0.000000] Memory: 480032K/522240K available (7354K kernel code,
>> 768K rwdata, 2360K rodata, 1024K init, 8122K bss, 25824K reserved,
>> 16384K cma-reserved, 0K highmem)
>> [ 0.000000] Virtual kernel memory layout:
>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>> [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
>> [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>> [ 0.000000] .text : 0xc0008000 - 0xc0a7ca28 (10707 kB)
>> [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
>> [ 0.000000] .data : 0xc0c00000 - 0xc0cc0284 ( 769 kB)
>> [ 0.000000] .bss : 0xc0cc2000 - 0xc14b0968 (8123 kB)
>> [ 0.000000] Running RCU self tests
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] RCU lockdep checking is enabled.
>> [ 0.000000] Build-time adjustment of leaf fanout to 32.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>> [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
>> interrupts
>> [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
>> [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
>> [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 58327039986419 ns
>> [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns,
>> wraps every 65535999984741ns
>> [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
>> [ 0.001922] Console: colour dummy device 80x30
>> [ 0.002014] Lock dependency validator: Copyright (c) 2006 Red Hat,
>> Inc., Ingo Molnar
>> [ 0.002014] ... MAX_LOCKDEP_SUBCLASSES: 8
>> [ 0.002014] ... MAX_LOCK_DEPTH: 48
>> [ 0.002044] ... MAX_LOCKDEP_KEYS: 8191
>> [ 0.002044] ... CLASSHASH_SIZE: 4096
>> [ 0.002075] ... MAX_LOCKDEP_ENTRIES: 32768
>> [ 0.002075] ... MAX_LOCKDEP_CHAINS: 65536
>> [ 0.002105] ... CHAINHASH_SIZE: 32768
>> [ 0.002105] memory used by lock dependency info: 5167 kB
>> [ 0.002105] per task-struct memory footprint: 1536 bytes
>> [ 0.002166] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
>> [ 0.106079] pid_max: default: 32768 minimum: 301
>> [ 0.106811] Security Framework initialized
>> [ 0.107025] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [ 0.107055] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [ 0.112335] CPU: Testing write buffer coherency: ok
>> [ 0.114837] CPU0: thread -1, cpu 0, socket -1, mpidr 0
>> [ 0.114929] Setting up static identity map for 0x80100000 - 0x80100070
>> [ 0.121246] Brought up 1 CPUs
>> [ 0.121307] SMP: Total of 1 processors activated (594.73 BogoMIPS).
>> [ 0.121307] CPU: All CPU(s) started in SVC mode.
>> [ 0.127685] devtmpfs: initialized
>> [ 0.253265] VFP support v0.3: implementor 41 architecture 3 part 30
>> variant c rev 3
>> [ 0.254608] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 19112604462750000 ns
>> [ 0.256927] pinctrl core: initialized pinctrl subsystem
>> [ 0.264709] NET: Registered protocol family 16
>> [ 0.274383] DMA: preallocated 256 KiB pool for atomic coherent allocations
>> [ 0.367279] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
>> [ 0.369964] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
>> [ 0.478790] cpuidle: using governor menu
>> [ 0.479797] Reprogramming SDRC clock to 332000000 Hz
>> [ 0.496551] gpio gpiochip0: (gpio): added GPIO chardev (254:0)
>> [ 0.498901] gpiochip_setup_dev: registered GPIOs 0 to 31 on device:
>> gpiochip0 (gpio)
>> [ 0.501312] OMAP GPIO hardware version 2.5
>> [ 0.503326] gpio gpiochip1: (gpio): added GPIO chardev (254:1)
>> [ 0.506195] gpiochip_setup_dev: registered GPIOs 32 to 63 on
>> device: gpiochip1 (gpio)
>> [ 0.509765] gpio gpiochip2: (gpio): added GPIO chardev (254:2)
>> [ 0.511199] gpiochip_setup_dev: registered GPIOs 64 to 95 on
>> device: gpiochip2 (gpio)
>> [ 0.514831] gpio gpiochip3: (gpio): added GPIO chardev (254:3)
>> [ 0.516387] gpiochip_setup_dev: registered GPIOs 96 to 127 on
>> device: gpiochip3 (gpio)
>> [ 0.519927] gpio gpiochip4: (gpio): added GPIO chardev (254:4)
>> [ 0.521423] gpiochip_setup_dev: registered GPIOs 128 to 159 on
>> device: gpiochip4 (gpio)
>> [ 0.524902] gpio gpiochip5: (gpio): added GPIO chardev (254:5)
>> [ 0.526519] gpiochip_setup_dev: registered GPIOs 160 to 191 on
>> device: gpiochip5 (gpio)
>> [ 0.562622] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
>> [ 0.562957] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
>> [ 0.563018] gpiochip_find_base: found new base at 508
>> [ 0.563110] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
>> [ 0.564636] gpiochip_setup_dev: registered GPIOs 508 to 511 on
>> device: gpiochip6 (omap-gpmc)
>> [ 0.582824] No ATAGs?
>> [ 0.582855] hw-breakpoint: debug architecture 0x4 unsupported.
>> [ 0.584381] omap4_sram_init:Unable to allocate sram needed to
>> handle errata I688
>> [ 0.584411] omap4_sram_init:Unable to get sram pool needed to
>> handle errata I688
>> [ 0.586517] OMAP DMA hardware revision 5.0
>> [ 0.643981] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
>> [ 0.653594] omap-iommu 480bd400.mmu: 480bd400.mmu registered
>> [ 0.655578] SCSI subsystem initialized
>> [ 0.656677] libata version 3.00 loaded.
>> [ 0.657897] usb_phy_generic hsusb2_phy: GPIO lookup for consumer reset
>> [ 0.657928] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
>> [ 0.658081] of_get_named_gpiod_flags: parsed 'reset-gpios' property
>> of node '/hsusb2_phy[0]' - status (0)
>> [ 0.658233] no flags found for reset
>> [ 0.658264] usb_phy_generic hsusb2_phy: GPIO lookup for consumer vbus-detect
>> [ 0.658294] usb_phy_generic hsusb2_phy: using device tree for GPIO lookup
>> [ 0.658294] of_get_named_gpiod_flags: can't parse
>> 'vbus-detect-gpios' property of node '/hsusb2_phy[0]'
>> [ 0.658325] of_get_named_gpiod_flags: can't parse
>> 'vbus-detect-gpio' property of node '/hsusb2_phy[0]'
>> [ 0.658355] usb_phy_generic hsusb2_phy: using lookup tables for GPIO lookup
>> [ 0.658538] usb_phy_generic hsusb2_phy: lookup for GPIO vbus-detect failed
>> [ 0.658721] hsusb2_phy supply vcc not found, using dummy regulator
>> [ 0.663757] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
>> [ 0.669342] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
>> [ 0.671508] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
>> [ 0.672241] pps_core: LinuxPPS API ver. 1 registered
>> [ 0.672271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
>> Rodolfo Giometti <giometti at linux.it>
>> [ 0.672363] PTP clock support registered
>> [ 0.679473] clocksource: Switched to clocksource 32k_counter
>> [ 0.842041] VFS: Disk quotas dquot_6.6.0
>> [ 0.842285] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [ 0.893707] NET: Registered protocol family 2
>> [ 0.896636] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
>> [ 0.896789] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
>> [ 0.898773] TCP: Hash tables configured (established 4096 bind 4096)
>> [ 0.899078] UDP hash table entries: 256 (order: 2, 20480 bytes)
>> [ 0.899536] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
>> [ 0.900848] NET: Registered protocol family 1
>> [ 0.903350] RPC: Registered named UNIX socket transport module.
>> [ 0.903411] RPC: Registered udp transport module.
>> [ 0.903411] RPC: Registered tcp transport module.
>> [ 0.903442] RPC: Registered tcp NFSv4.1 backchannel transport module.
>> [ 0.911529] hw perfevents: enabled with armv7_cortex_a8 PMU driver,
>> 5 counters available
>> [ 0.920745] futex hash table entries: 256 (order: 2, 16384 bytes)
>> [ 0.921081] audit: initializing netlink subsys (disabled)
>> [ 0.921417] audit: type=2000 audit(0.910:1): initialized
>> [ 0.927734] workingset: timestamp_bits=12 max_order=17 bucket_order=5
>> [ 0.932006] NFS: Registering the id_resolver key type
>> [ 0.932586] Key type id_resolver registered
>> [ 0.932617] Key type id_legacy registered
>> [ 0.932861] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
>> [ 0.941497] io scheduler noop registered
>> [ 0.941528] io scheduler deadline registered
>> [ 0.941619] io scheduler cfq registered (default)
>> [ 0.946166] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
>> [ 0.947021] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
>> [ 0.948669] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
>> [ 0.957336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [ 0.967956] omap_uart 4806a000.serial: no wakeirq for uart0
>> [ 0.968017] of_get_named_gpiod_flags: can't parse 'rts-gpio'
>> property of node '/ocp/serial at 4806a000[0]'
>> [ 0.968902] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88,
>> base_baud = 3000000) is a OMAP UART0
>> [ 0.972473] omap_uart 4806c000.serial: no wakeirq for uart1
>> [ 0.972534] of_get_named_gpiod_flags: can't parse 'rts-gpio'
>> property of node '/ocp/serial at 4806c000[0]'
>> [ 0.973083] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89,
>> base_baud = 3000000) is a OMAP UART1
>> [ 0.975219] omap_uart 49020000.serial: no wakeirq for uart2
>> [ 0.975280] of_get_named_gpiod_flags: can't parse 'rts-gpio'
>> property of node '/ocp/serial at 49020000[0]'
>> [ 0.975769] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90,
>> base_baud = 3000000) is a OMAP UART2
>> [ 2.029327] console [ttyO2] enabled
>> [ 2.035797] omap_uart 49042000.serial: no wakeirq for uart3
>> [ 2.041900] of_get_named_gpiod_flags: can't parse 'rts-gpio'
>> property of node '/ocp/serial at 49042000[0]'
>> [ 2.052276] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96,
>> base_baud = 3000000) is a OMAP UART3
>> [ 2.124420] brd: module loaded
>> [ 2.163604] loop: module loaded
>> [ 2.197631] twl 0-0048: PIH (irq 23) chaining IRQs 338..346
>> [ 2.204193] twl 0-0048: power (irq 343) chaining IRQs 346..353
>> [ 2.226593] VAUX3: Bringing 2800000uV into 2500000-2500000uV
>> [ 2.282531] VSIM: Bringing 1800000uV into 2800000-2800000uV
>> [ 2.293121] twl4030_gpio twl4030-gpio: gpio (irq 338) chaining IRQs 354..371
>> [ 2.301391] gpiochip_find_base: found new base at 490
>> [ 2.306762] gpio gpiochip7: (twl4030): added GPIO chardev (254:7)
>> [ 2.314666] gpiochip_setup_dev: registered GPIOs 490 to 507 on
>> device: gpiochip7 (twl4030)
>> [ 2.337219] mtdoops: mtd device (mtddev=name/number) must be supplied
>> [ 2.346374] omap2-nand 30000000.nand: GPIO lookup for consumer rb
>> [ 2.352905] omap2-nand 30000000.nand: using device tree for GPIO lookup
>> [ 2.359924] of_get_named_gpiod_flags: can't parse 'rb-gpios'
>> property of node '/ocp/gpmc at 6e000000/nand at 0,0[0]'
>> [ 2.370513] of_get_named_gpiod_flags: can't parse 'rb-gpio'
>> property of node '/ocp/gpmc at 6e000000/nand at 0,0[0]'
>> [ 2.380981] omap2-nand 30000000.nand: using lookup tables for GPIO lookup
>> [ 2.388122] omap2-nand 30000000.nand: lookup for GPIO rb failed
>> [ 2.394805] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xbc
>> [ 2.401550] nand: Micron MT29F4G16ABBDA3W
>> [ 2.405761] nand: 512 MiB, SLC, erase size: 128 KiB, page size:
>> 2048, OOB size: 64
>> [ 2.413757] nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
>> [ 2.422363] 5 ofpart partitions found on MTD device 30000000.nand
>> [ 2.428802] Creating 5 MTD partitions on "30000000.nand":
>> [ 2.434570] 0x000000000000-0x000000080000 : "X-Loader"
>> [ 2.450073] 0x000000080000-0x000000260000 : "U-Boot"
>> [ 2.463287] 0x000000260000-0x000000280000 : "U-Boot Env"
>> [ 2.474670] 0x000000280000-0x000000680000 : "Kernel"
>> [ 2.489257] 0x000000680000-0x000010000000 : "File System"
>> [ 2.741119] mousedev: PS/2 mouse device common for all mice
>> [ 2.747009] i2c /dev entries driver
>> [ 2.759674] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
>> [ 2.766052] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
>> [ 2.773010] of_get_named_gpiod_flags: can't parse 'cd-gpios'
>> property of node '/ocp/mmc at 4809c000[0]'
>> [ 2.782684] of_get_named_gpiod_flags: can't parse 'cd-gpio'
>> property of node '/ocp/mmc at 4809c000[0]'
>> [ 2.792236] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
>> [ 2.799316] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed
>> [ 2.805511] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
>> [ 2.811859] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
>> [ 2.818756] of_get_named_gpiod_flags: can't parse 'wp-gpios'
>> property of node '/ocp/mmc at 4809c000[0]'
>> [ 2.828399] of_get_named_gpiod_flags: can't parse 'wp-gpio'
>> property of node '/ocp/mmc at 4809c000[0]'
>> [ 2.837982] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
>> [ 2.845062] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
>> [ 2.890350] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd
>> [ 2.896697] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
>> [ 2.903686] of_get_named_gpiod_flags: can't parse 'cd-gpios'
>> property of node '/ocp/mmc at 480b4000[0]'
>> [ 2.913360] of_get_named_gpiod_flags: can't parse 'cd-gpio'
>> property of node '/ocp/mmc at 480b4000[0]'
>> [ 2.922943] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
>> [ 2.930023] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed
>> [ 2.936187] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
>> [ 2.942565] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
>> [ 2.949462] of_get_named_gpiod_flags: can't parse 'wp-gpios'
>> property of node '/ocp/mmc at 480b4000[0]'
>> [ 2.959075] of_get_named_gpiod_flags: can't parse 'wp-gpio'
>> property of node '/ocp/mmc at 480b4000[0]'
>> [ 2.968627] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
>> [ 2.975708] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
>> [ 3.030578] ledtrig-cpu: registered to indicate activity on CPUs
>> [ 3.040740] oprofile: using arm/armv7
>> [ 3.045501] Initializing XFRM netlink socket
>> [ 3.050811] NET: Registered protocol family 10
>> [ 3.062072] sit: IPv6 over IPv4 tunneling driver
>> [ 3.070739] NET: Registered protocol family 17
>> [ 3.075592] NET: Registered protocol family 15
>> [ 3.080963] Key type dns_resolver registered
>> [ 3.085937] omap2_set_init_voltage: unable to find boot up OPP for
>> vdd_mpu_iva
>> [ 3.093627] omap2_set_init_voltage: unable to set vdd_mpu_iva
>> [ 3.099761] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
>> [ 3.107086] omap2_set_init_voltage: unable to set vdd_core
>> [ 3.118011] ThumbEE CPU extension supported.
>> [ 3.122711] Registering SWP/SWPB emulation handler
>> [ 3.127746] SmartReflex Class3 initialized
>> [ 3.146453] mmc0: host does not support reading read-only switch,
>> assuming write-enable
>> [ 3.158416] ubi0: attaching mtd4
>> [ 3.170135] mmc0: new high speed SDHC card at address d555
>> [ 3.191192] mmcblk0: mmc0:d555 SU08G 7.61 GiB
>> [ 3.212982] mmcblk0: p1 p2
>> [ 3.781158] ubi0: scanning is finished
>> [ 3.801452] ubi0: attached mtd4 (name "File System", size 249 MiB)
>> [ 3.807983] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
>> [ 3.815307] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
>> [ 3.822418] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
>> [ 3.829620] ubi0: good PEBs: 1996, bad PEBs: 0, corrupted PEBs: 0
>> [ 3.836029] ubi0: user volume: 0, internal volumes: 1, max. volumes
>> count: 128
>> [ 3.843658] ubi0: max/mean erase counter: 1/1, WL threshold: 4096,
>> image sequence number: 372592282
>> [ 3.853179] ubi0: available PEBs: 1912, total reserved PEBs: 84,
>> PEBs reserved for bad PEB handling: 80
>> [ 3.864624] hctosys: unable to open rtc device (rtc0)
>> [ 3.870056] sr_init: No PMIC hook to init smartreflex
>> [ 3.876068] smartreflex smartreflex.0: omap_sr_probe: SmartReflex
>> driver initialized
>> [ 3.885437] smartreflex smartreflex.1: omap_sr_probe: SmartReflex
>> driver initialized
>> [ 3.968749] ubi0: background thread "ubi_bgt0d" started, PID 80
>> [ 3.975830] VAUX3: disabling
>> [ 3.980194] VDAC: disabling
>> [ 3.984313] VUSB1V5: disabling
>> [ 3.988372] VUSB1V8: disabling
>> [ 3.992492] VUSB3V1: disabling
>> [ 3.996551] VPLL2: disabling
>> [ 4.008575]
>> [ 4.010162] ===============================
>> [ 4.014587] [ INFO: suspicious RCU usage. ]
>> [ 4.018981] 4.7.0-rc2-00007-g43c082e-dirty #1 Not tainted
>> [ 4.024658] -------------------------------
>> [ 4.029052] include/trace/events/power.h:328 suspicious
>> rcu_dereference_check() usage!
>> [ 4.037384]
>> [ 4.037384] other info that might help us debug this:
>> [ 4.037384]
>> [ 4.045776]
>> [ 4.045776] RCU used illegally from idle CPU!
>> [ 4.045776] rcu_scheduler_active = 1, debug_locks = 0
>> [ 4.057220] RCU used illegally from extended quiescent state!
>> [ 4.063262] no locks held by swapper/0/0.
>> [ 4.067474]
>> [ 4.067474] stack backtrace:
>> [ 4.072052] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
>> 4.7.0-rc2-00007-g43c082e-dirty #1
>> [ 4.080474] Hardware name: Generic OMAP36xx (Flattened Device Tree)
>> [ 4.087097] [<c0110158>] (unwind_backtrace) from [<c010c2bc>]
>> (show_stack+0x10/0x14)
>> [ 4.095245] [<c010c2bc>] (show_stack) from [<c0482ff0>]
>> (dump_stack+0xb0/0xe4)
>> [ 4.102844] [<c0482ff0>] (dump_stack) from [<c012bf5c>]
>> (pwrdm_set_next_pwrst+0x18c/0x1e4)
>> [ 4.111572] [<c012bf5c>] (pwrdm_set_next_pwrst) from [<c0126b38>]
>> (omap3_enter_idle_bm+0x16c/0x214)
>> [ 4.121093] [<c0126b38>] (omap3_enter_idle_bm) from [<c0607428>]
>> (cpuidle_enter_state+0x124/0x3fc)
>> [ 4.130493] [<c0607428>] (cpuidle_enter_state) from [<c01859e8>]
>> (cpu_startup_entry+0x29c/0x3c0)
>> [ 4.139770] [<c01859e8>] (cpu_startup_entry) from [<c0b00c1c>]
>> (start_kernel+0x340/0x3b4)
>> [ 4.148376] [<c0b00c1c>] (start_kernel) from [<8000807c>] (0x8000807c)
>> [ 4.266784] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
>> data mode. Opts: (null)
>> [ 4.275543] VFS: Mounted root (ext4 filesystem) on device 179:2.
>> [ 4.293884] devtmpfs: mounted
>> [ 4.299407] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
>> Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
>> INIT: version 2.88 booting
>> [info] Using makefile-style concurrent boot in runlevel S.
>> calling: info
>> [....] Starting the hotplug events dispatcher: udevd[ 5.824218]
>> systemd-udevd[190]: starting version 215
>> [ 5.901977] random: udevd urandom read with 40 bits of entropy available
>> . ok
>> [....] Synthesizing the initial hotplug events...calling: trigger
>> [ 6.495513] 48050000.dss supply vdda_video not found, using dummy regulator
>> [ 6.503387] OMAP DSS rev 2.0
>> [ 6.507202] omapdss_dss 48050000.dss: bound 48050400.dispc (ops
>> dispc_component_ops [omapdss])
>> [ 6.516876] omapdss_dss 48050000.dss: bound 48050c00.encoder (ops
>> venc_component_ops [omapdss])
>> [ 6.542541] omap_ssi 48058000.ssi-controller: ssi controller 0
>> initialized (2 ports)!
>> [ 6.552124] omap_ssi_port 4805a000.ssi-port: GPIO lookup for
>> consumer ti,ssi-cawake
>> [ 6.560272] omap_ssi_port 4805a000.ssi-port: using device tree for
>> GPIO lookup
>> [ 6.567871] of_get_named_gpiod_flags: can't parse
>> 'ti,ssi-cawake-gpios' property of node
>> '/ocp/ssi-controller at 48058000/ssi-port at 4805a000[0]'
>> [ 6.581207] of_get_named_gpiod_flags: can't parse
>> 'ti,ssi-cawake-gpio' property of node
>> '/ocp/ssi-controller at 48058000/ssi-port at 4805a000[0]'
>> [ 6.594451] omap_ssi_port 4805a000.ssi-port: using lookup tables
>> for GPIO lookup
>> [ 6.602264] omap_ssi_port 4805a000.ssi-port: lookup for GPIO
>> ti,ssi-cawake failed
>> [ 6.610198] omap_ssi_port 4805a000.ssi-port: couldn't get cawake
>> gpio (err=-2)!
>> [ 6.617919] omap_ssi_port: probe of 4805a000.ssi-port failed with error -2
>> [ 6.625335] omap_ssi_port 4805b000.ssi-port: GPIO lookup for
>> consumer ti,ssi-cawake
>> [ 6.633483] omap_ssi_port 4805b000.ssi-port: using device tree for
>> GPIO lookup
>> [ 6.641113] of_get_named_gpiod_flags: can't parse
>> 'ti,ssi-cawake-gpios' property of node
>> '/ocp/ssi-controller at 48058000/ssi-port at 4805b000[0]'
>> [ 6.654449] of_get_named_gpiod_flags: can't parse
>> 'ti,ssi-cawake-gpio' property of node
>> '/ocp/ssi-controller at 48058000/ssi-port at 4805b000[0]'
>> [ 6.667663] omap_ssi_port 4805b000.ssi-port: using lookup tables
>> for GPIO lookup
>> [ 6.675506] omap_ssi_port 4805b000.ssi-port: lookup for GPIO
>> ti,ssi-cawake failed
>> [ 6.683410] omap_ssi_port 4805b000.ssi-port: couldn't get cawake
>> gpio (err=-2)!
>> [ 6.691192] omap_ssi_port: probe of 4805b000.ssi-port failed with error -2
>> [ 6.884765] usbcore: registered new interface driver usbfs
>> [ 6.890991] usbcore: registered new interface driver hub
>> [ 6.896820] usbcore: registered new device driver usb
>> [ 6.933258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 7.045928] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 7.088195] twl4030_bci 48070000.i2c:twl at 48:bci: could not request
>> vac iio channel
>> [ 7.156280] ohci-omap3: OHCI OMAP3 driver
>> [ 7.161804] ohci-omap3 48064400.ohci: OHCI Host Controller
>> [ 7.167694] ohci-omap3 48064400.ohci: new USB bus registered,
>> assigned bus number 1
>> [ 7.186309] ehci-omap: OMAP-EHCI Host Controller driver
>> [ 7.229248] input: twl4030_pwrbutton as
>> /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl at 48:pwrbutton/input/input0
>> [ 7.406494] ohci-omap3 48064400.ohci: irq 92, io mem 0x48064400
>> [ 7.504974] twl_rtc 48070000.i2c:twl at 48:rtc: Power up reset detected.
>> [ 7.568237] twl_rtc 48070000.i2c:twl at 48:rtc: Enabling TWL-RTC
>> [ 7.631652] of_get_named_gpiod_flags: parsed 'gpios' property of
>> node '/ocp/i2c at 48072000/tsc2007 at 48[0]' - status (0)
>> [ 7.659973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 7.667144] usb usb1: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 7.674865] usb usb1: Product: OHCI Host Controller
>> [ 7.680053] usb usb1: Manufacturer: Linux
>> 4.7.0-rc2-00007-g43c082e-dirty ohci_hcd
>> [ 7.687927] usb usb1: SerialNumber: 48064400.ohci
>> [ 7.694396] twl_rtc 48070000.i2c:twl at 48:rtc: rtc core: registered
>> 48070000.i2c:twl at 48 as rtc0
>> [ 7.760467] input: TSC2007 Touchscreen as
>> /devices/platform/68000000.ocp/48072000.i2c/i2c-1/1-0048/input/input1
>> [ 7.773651] twl4030_usb 48070000.i2c:twl at 48:twl4030-usb:
>> Initialized TWL4030 USB module
>> [ 7.848999] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
>> [ 7.869903] Driver for 1-wire Dallas network protocol.
>> [ 7.881622] bmp085 1-0077: Successfully initialized bmp085!
>> [ ok [ 7.943084] hub 1-0:1.0: USB hub found
>> [ 7.997833] hub 1-0:1.0: 3 ports detected
>> [ 8.017120] media: Linux media interface: v0.10
>> [ 8.059265] musb-hdrc musb-hdrc.0.auto: new USB bus registered,
>> assigned bus number 2
>> [ 8.079833] ehci-omap 48064800.ehci: EHCI Host Controller
>> done.
>> [ 8.117462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 8.124847] usb usb2: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 8.132507] usb usb2: Product: MUSB HDRC host driver
>> [ 8.137756] usb usb2: Manufacturer: Linux
>> 4.7.0-rc2-00007-g43c082e-dirty musb-hcd
>> [ 8.145721] usb usb2: SerialNumber: musb-hdrc.0.auto
>> [ 8.197174] Linux video capture interface: v2.00
>> [....] Waiting for /dev to be fully populated...[ 8.434173] hub
>> 2-0:1.0: USB hub found
>> [ 8.452728] hub 2-0:1.0: 1 port detected
>> calling: settle
>> [ 8.489624] ehci-omap 48064800.ehci: new USB bus registered,
>> assigned bus number 3
>> [ 8.499999] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver
>> in Interrupt mode
>> [ 8.531494] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
>> [ 8.557556] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
>> [ 8.570007] of_graph_get_next_endpoint(): no port node found in
>> /ocp/isp at 480bc000/ports
>> [ 8.578613] 480bc000.isp supply vdd-csiphy1 not found, using dummy regulator
>> [ 8.586486] 480bc000.isp supply vdd-csiphy2 not found, using dummy regulator
>> [ 8.594421] omap3isp 480bc000.isp: Revision 15.0 found
>> [ 8.600799] iommu: Adding device 480bc000.isp to group 0
>> [ 8.606506] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
>> [ 8.613281] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> CCP2 was not initialized!
>> [ 8.639770] w1_master_driver w1_bus_master1: Family 1 for
>> 01.000000000000.3d is not registered.
>> [ 8.668731] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
>> [ 8.699737] connector-analog-tv connector at 1: failed to find video source
>> [ 8.729919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 8.737091] usb usb3: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 8.744781] usb usb3: Product: EHCI Host Controller
>> [ 8.749969] usb usb3: Manufacturer: Linux
>> 4.7.0-rc2-00007-g43c082e-dirty ehci_hcd
>> [ 8.757843] usb usb3: SerialNumber: 48064800.ehci
>> [ 8.884887] connector-analog-tv connector at 1: failed to find video source
>> [ 8.931030] of_get_named_gpiod_flags: parsed 'gpios' property of
>> node '/gpio-keys/aux-button[0]' - status (0)
>> [ 8.942413] input: gpio-keys as /devices/platform/gpio-keys/input/input2
>> [ 8.950988] connector-analog-tv connector at 1: failed to find video source
>> [ 9.014099] omapfb omapfb: no displays
>> [ 9.018310] omapfb omapfb: failed to setup omapfb
>> [ 9.055175] of_get_named_gpiod_flags: can't parse
>> 'ti,jack-det-gpio' property of node '/sound[0]'
>> [ 9.065277] of_get_named_gpiod_flags: can't parse
>> 'ti,hs_extmute_gpio' property of node
>> '/ocp/i2c at 48070000/twl at 48/audio/codec[0]'
>> [ 9.087890] hub 3-0:1.0: USB hub found
>> [ 9.108459] hub 3-0:1.0: 3 ports detected
>> [ 9.113250] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> CSI2a was not initialized!
>> [ 9.144470] connector-analog-tv connector at 1: failed to find video source
>> [ 9.152954] omapfb omapfb: no displays
>> [ 9.157135] omapfb omapfb: failed to setup omapfb
>> [ 9.177246] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> CCDC was not initialized!
>> [ 9.241119] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> preview was not initialized!
>> [ 9.314788] omap-twl4030 sound: twl4030-hifi <-> 49022000.mcbsp mapping ok
>> [ 9.389923] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> resizer was not initialized!
>> [ 9.431213] connector-analog-tv connector at 1: failed to find video source
>> [ 9.439697] omapfb omapfb: no displays
>> [ 9.443908] omapfb omapfb: failed to setup omapfb
>> [ 9.449249] /sound_telephony/simple-audio-card,cpu: could not get
>> #sound-dai-cells for /ocp/mcbsp at 49026000
>> [ 9.459472] asoc-simple-card sound_telephony: parse error -22
>> [ 9.465545] asoc-simple-card: probe of sound_telephony failed with error -22
>> [ 9.479888] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> AEWB was not initialized!
>> [ 9.488830] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> AF was not initialized!
>> [ 9.497741] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
>> histogram was not initialized!
>> [ 9.697509] iommu: Removing device 480bc000.isp from group 0
>> [ 9.704467] omap3isp: probe of 480bc000.isp failed with error -22
>>
>> BR,
>>
>> marek
>>
>> --
>> as simple and primitive as possible
>> -------------------------------------------------
>> Marek Belisko - OPEN-NANDRA
>> Freelance Developer
>>
>> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
>> Tel: +421 915 052 184
>> skype: marekwhite
>> twitter: #opennandra
>> web: http://open-nandra.com
>
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
More information about the Letux-kernel
mailing list