[Letux-kernel] battery state of charge formula

Belisko Marek marek.belisko at gmail.com
Sun Jun 5 08:27:50 CEST 2016

On Sun, Jun 5, 2016 at 8:25 AM, H. Nikolaus Schaller <hns at goldelico.com> wrote:
>> Am 05.06.2016 um 08:20 schrieb H. Nikolaus Schaller <hns at goldelico.com>:
>> Hi Marek,
>> I did a quick research and google came up with some interesting results.
>> a) http://www.hindawi.com/journals/isrn/2013/953792/
>> b) http://www.mpoweruk.com/soc.htm
>> "Practical SOC Estimation
>> Alternatively the performance characteristics of a typical sample cell (or cells) can be measured and the results used as a template to represent the performance of the rest of the population. Basing the cell performance estimates on look up tables constructed from measured data from actual cells is much simpler than carrying out theoretical estimates since it automatically takes account of most if not all the factors affecting the SOC. Look up tables are stepwise approximations of the performance response curves which represent the cell discharge performance as a function of temperature, discharge rate or other parameters. See example above. The necessary look up tables are developed from laboratory measurements under controlled conditions. The process of gathering the data and constructing the look up table is called cell characterisation and only needs to be carried out once, however a new data set or look up table must be produced for each cell chemistry variant and cell constr
>  uc
>> tion used."
>> => exactly what we had done / proposed in non-DT driver
>> c) http://liionbms.com/php/wp_soc_estimate.php
>> d) http://www.mdpi.com/1996-1073/8/8/7854/pdf
>> e) http://www.mdpi.com/1996-1073/7/5/3004/pdf
>> f) finally I found "our" formula (which appears to circulate around RC model communities and practitioneers):
>> 2006:
>> http://www.candlepowerforums.com/vb/showthread.php?115871-Li-Ion-State-of-Charge-and-Voltage-Measurements&s=d700f18111fc9a99aaa214274cdc41ff&p=2440539&viewfull=1#post2440539
>> 2008:
>> http://www.rcgroups.com/forums/showpost.php?p=9276188&postcount=9
>> http://www.rcgroups.com/forums/showthread.php?t=827602&page=2
>> The 2006 message was the oldest one I could find on the net: (google search "0.1966 Square Root 0.0387 1.4523 3.7835" before 2006)
>> I think we should add proper attribution in our commit message - and perhaps do a little more research if we can find a source for citation, i.e. the "inventor" of the formula.
> Here is some other hint where it comes from:
> http://www.candlepowerforums.com/vb/showthread.php?357487-How-long-to-charge-a-new-batteries-(14500-and-18650)&p=4163950&viewfull=1#post4163950
I found also this:
> "I believe the formula came from a Sanyo publication a few years back. ... Tom"
> "Tom = Silver Fox" appears to be a "guru" on that forum.
>> Something like:
>> Proposed-To-Use-By: Pavel Machek
>> Invented-By: unknown (before 2006)
>> Published-By: <http://www.candlepowerforums.com/vb/showthread.php?115871-Li-Ion-State-of-Charge-and-Voltage-Measurements#post2440539>
>> BR,
>> Nikolaus
>> _______________________________________________
>> http://projects.goldelico.com/p/gta04-kernel/
>> Letux-kernel mailing list
>> Letux-kernel at openphoenux.org
>> http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
> _______________________________________________
> http://projects.goldelico.com/p/gta04-kernel/
> Letux-kernel mailing list
> Letux-kernel at openphoenux.org
> http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel



as simple and primitive as possible
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com

More information about the Letux-kernel mailing list