[Gta04-owner] qte build

[Andreas Kemnade]

Hi,

On Thu, 12 Apr 2018 12:53:29 +0200
Andreas Kemnade <andreas at kemnade.info> wrote:

> On Thu, 12 Apr 2018 09:27:31 +0200
> Belisko Marek <marek.belisko at gmail.com> wrote:
> 
> > HI Nikolaus,
> > 
> > On Thu, Apr 12, 2018 at 9:11 AM, H. Nikolaus Schaller <hns at goldelico.com> wrote:  
> > > HI,
> > > it is finished now
> > >
> > > Am 11.04.2018 um 21:15 schrieb H. Nikolaus Schaller <hns at goldelico.com>:
> > >
> > > Hi,
> > >
> > > Am 11.04.2018 um 17:15 schrieb Andreas Kemnade <andreas at kemnade.info>:
> > >
> > > Hi,
> > >
> > > On Fri, 6 Apr 2018 20:53:04 +0200
> > > "H. Nikolaus Schaller" <hns at goldelico.com> wrote:
> > >
> > > Hi,
> > >
> > > Am 06.04.2018 um 20:37 schrieb Andreas Kemnade <andreas at kemnade.info>:
> > >
> > > On Fri, 6 Apr 2018 08:50:37 +0200
> > > Belisko Marek <marek.belisko at gmail.com> wrote:
> > >
> > > Hi,
> > >
> > > I think it's due to the strict compiler in jessie then in older
> > > versions. I think it should be easily fixable. I tried yesterday do
> > > docker build for qtmoko but it's still wip but looks promising. Then
> > > we don't need any chroot on arm boards but we can do it easily on PC.
> > > Will provide more info when have some results.
> > >
> > > qt builds on jessie (the version inside the qtmoko tree where qdbus is
> > > disabled) So the problem can be easily solved by disabling the same
> > > amount of things in the ./configure in qtmoko-qte2 than in qtmoko
> > > itself.
> > >
> > > So the question was just whether it was intentional to have different
> > > configure options there.
> > >
> > >
> > > Probably nobody looked at that yet. There was enough work to get it
> > > compiled.
> > >
> > > Yes, can be the explanation. Just hesitating to change something
> > > perhaps well thought of.
> > >
> > >
> > > P.S: which gcc version you have in jessie? I think fomr 5.x or 6.x
> > > while in older was 4.7 or 4.9
> > >
> > >
> > > 4.9
> > >
> > >
> > > Hm. I still wonder why it worked for me with configure as it is.
> > > Maybe I should retry a clean build?
> > >
> > > yes, thas would be helpful.
> > >
> > >
> > > Have started a complete fresh build (incl. all debootstrapping steps)
> > > now. Should run smoothly on 21% of a 200 GB µSD...
> > >
> > > I can then go through the build log to see what it reports for
> > > qtmoko2-qte/source/src/dbus/qdbusintegrator.cpp
> > >
> > >
> > > Well, it wasn't compiled at all!
> > >
> > > Here are some snippets from the log:
> > >
> > > Warning: PKG_CONFIG_PATH has not been set.  This could mean
> > > the host compiler's .pc files will be used. This is probably
> > > not what you want.
> > >
> > > make[2]: Entering directory `/qtmoko2-qte/build/config.tests/unix/endian'
> > > rm -f endiantest.o
> > > rm -f *~ core *.core
> > > rm -f endiantest
> > > rm -f Makefile
> > > make[2]: Leaving directory `/qtmoko2-qte/build/config.tests/unix/endian'
> > > make[2]: Entering directory `/qtmoko2-qte/build/config.tests/unix/endian'
> > > rm -f endiantest.o
> > > rm -f *~ core *.core
> > > rm -f endiantest
> > > rm -f Makefile
> > > make[2]: Leaving directory `/qtmoko2-qte/build/config.tests/unix/endian'
> > > ln: failed to create symbolic link
> > > `/qtmoko2-qte/build/include/QtCore/qconfig.h': File exists
> > > ln: failed to create symbolic link
> > > `/qtmoko2-qte/build/include/Qt/qconfig.h': File exists
> > >
> > > Building on:   linux-debian-armhf
> > > Building for:  qws/linux-debian-armhf
> > > Architecture:  generic
> > > Host architecture: arm
> > >
> > > Build .................. libs examples demos docs translations
> > > Configuration ..........  cross_compile system-sqlite release embedded
> > > largefile stl precompile_header exceptions_off  minimal-config small-config
> > > medium-config large-config full-config qt3support phonon phonon-backend
> > > accessibility shared embedded reduce_exports ipv6 clock-gettime
> > > clock-monotonic mremap getaddrinfo ipv6ifname getifaddrs inotify system-jpeg
> > > png system-tiff freetype system-zlib nis glib gstreamer concurrent
> > > multimedia audio-backend svg webkit script scripttools declarative release
> > > Debug .................. no
> > > Qt 3 compatibility ..... yes
> > > QtDBus module .......... no
> > > QtConcurrent code ...... yes
> > > QtGui module ........... yes
> > >
> > > /qtmoko2-qte/build/bin/moc -DQT_SHARED -DQT_NO_CAST_TO_ASCII
> > > -DQT_ASCII_CAST_WARNINGS -DQT3_SUPPORT -DQT_MOC_COMPAT
> > > -DQT_USE_QSTRINGBUILDER -DMAKE_PHONON_LIB -DQT_NO_DBUS -DQT_NO_DEBUG
> > > -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -D_LARGEFILE64_SOURCE
> > > -D_LARGEFILE_SOURCE -I/qtmoko2-qte/source/mkspecs/qws/linux-debian-armhf
> > > -I/qtmoko2-qte/source/src/phonon -I../../include/QtCore
> > > -I../../include/QtNetwork -I../../include/QtGui -I../../include
> > > -I../../include/phonon -I.rcc/release-shared-emb-auto
> > > -I.moc/release-shared-emb-auto -I.
> > > /qtmoko2-qte/source/src/3rdparty/phonon/phonon/abstractaudiooutput.h -o
> > > .moc/release-shared-emb-auto/moc_abstractaudiooutput.cpp
> > >
> > > If I understand correctly, it seems as if my sandboxed setup does NOT try to
> > > build dbus?    
> > Yes looks like. There must be the reason for that either dbus is
> > disabled in config or some conditions were not met and qt disable dbus
> > from building.  
> 
> Hmm, I was using the same configuration, so the reason was just that I
> had installed dbus for some reason. So it discovered my dbus and tried
> to compile it.
> 
I just found out something interesting:

apt-get source libqt-dev gives one
directory called qt4-x11-4.8.6+git64-g5dc8b2b+dfsg

and 5dc8b2b  is a commit in qtmoko-qte2. So maybe putting qtmoko-qte on
top of debian-qt4 might be intresting. It will give us the compile
fixes. My libmng fix is already there. 
But now I am compiling qtmoko-qte2 as-is with just a different
configuration.

Then I will continue to convince qtmoko to take that one.

Regards,
Andreas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20180413/7f5d792c/attachment.asc>