[Gta04-owner] [PATCH 0/4] UART slave device support - version 4

[Andreas Kemnade]

On Mon, 18 Jan 2016 22:03:19 +0000
One Thousand Gnomes <gnomes at lxorguk.ukuu.org.uk> wrote:

> > > Your user space can do it (as most Android does).
> > 
> > How can it do it in automatically in a standardized way without need for daemon support?
> 
> You don't need to - it can be device specific. In Android it usually is.
> I've never understood why low end devices don't also abstract user space
> descriptions of power control into DT nodes as well as kernel properties ?
> 
Well, on these android devices, they are only intended to run android and
have another abstraction layer where you can hide things.
If doing actions on opening or closing a tty should not be implemented in
kernel space, then an alternative I see would be to at least have proper
rfkill support for bluetooth and gps in kernel. Then userspace can at least
can talk to a standardised interface. So userspace just has to implement
generic things.

That would mean for the kernel drivers needed:


W2CBW003/bluetooth:
   map the rfkill to just a simple regulator

W2SG0004/gps:
   being notified about incoming data
     a) the nice way: getting it from the tty/tty_port layer
 	(but requiring changes at generic kernel code)
        or
     b) the ugly way:
        remux the data line as a gpio and simply look for state
        changes during rfkill call (probably only during unblock)
	The first characters after power on would probably be lost
        toggle a gpio depending on the desired and detected state

Regards,
Andreas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20160119/e125cf0f/attachment.asc>