[Gta04-owner] [PATCH 0/3] tty slave device support - version 3.
Dr. H. Nikolaus Schaller
hns at goldelico.com
Fri Mar 20 08:54:35 CET 2015
Hi Neil,
Am 18.03.2015 um 06:58 schrieb NeilBrown <neil at brown.name>:
> Hi again,
> here is version 3 of support for tty-slaves.
>
> This version introduces a new bus-type for tty-slaves,
Hm. I am still not convinced that a tty is a „bus“ and
that this is a solution for a wide-spread problem.
> and causes
> a tty-slave device to appear in /sys/devices between the uart and the
> tty.
> It effectively intercepts and calls from the tty to the uart (i.e. any
> tty_operations) and applies extra functionality at that point.
>
> Currently the only driver intercepts open and close.
> It powers on the device on open, and powers off at last-close.
That is what the missing piece in Linux is to make the w2sg0004
chip work.
>
> Power can be controlled by a regulator or by toggling a GPIO.
I think such a GPIO logic has nothing to do with serial and
should be left over to the regulator logic, i.e. we need a special
regulator-w2sg0004 driver.
So I suggest to remove the GPIO logic from your
drivers/tty/slave/serial-power-manager.c
And then you can even get rid of adding a chip specific „compatible“
entry for the subnodes.
>
> I think I've incorporated most of the feed back I received from
> previous versions, but if I missed something - I apologize. If
> this approach is structurally acceptable then I can fix up all the
> smaller issues.
As said I would prefer that the w2sg0004 driver is just a separate
„regulator“ driver as we had proposed before.
Nikolaus
>
> Thanks for your review,
> NeilBrown
>
>
> ---
>
> NeilBrown (3):
> TTY: use class_find_device to find port in uart_suspend/resume.
> TTY: add support for tty_slave devices.
> tty/slaves: add a driver to power on/off UART attached devices.
>
>
> .../bindings/tty_slave/wi2wi,w2cbw003.txt | 19 +
> .../bindings/tty_slave/wi2wi,w2sg0004.txt | 37 +
> .../devicetree/bindings/vendor-prefixes.txt | 1
> drivers/tty/Kconfig | 1
> drivers/tty/Makefile | 1
> drivers/tty/serial/serial_core.c | 21 -
> drivers/tty/slave/Kconfig | 21 +
> drivers/tty/slave/Makefile | 4
> drivers/tty/slave/serial-power-manager.c | 510 ++++++++++++++++++++
> drivers/tty/slave/tty_slave_core.c | 136 +++++
> drivers/tty/tty_io.c | 60 ++
> include/linux/tty.h | 2
> include/linux/tty_slave.h | 26 +
> 13 files changed, 813 insertions(+), 26 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/tty_slave/wi2wi,w2cbw003.txt
> create mode 100644 Documentation/devicetree/bindings/tty_slave/wi2wi,w2sg0004.txt
> create mode 100644 drivers/tty/slave/Kconfig
> create mode 100644 drivers/tty/slave/Makefile
> create mode 100644 drivers/tty/slave/serial-power-manager.c
> create mode 100644 drivers/tty/slave/tty_slave_core.c
> create mode 100644 include/linux/tty_slave.h
>
> --
> Signature
>
> _______________________________________________
> Gta04-owner mailing list
> Gta04-owner at goldelico.com
> http://lists.goldelico.com/mailman/listinfo.cgi/gta04-owner
More information about the Gta04-owner
mailing list