[Gta04-owner] Linux gta04 4.0.0-rc4-gta04+ #1016 SMP Mon Mar 16 09:56:58 CET 2015 armv7l GNU/Linux

[Dr. H. Nikolaus Schaller]

Hi,
I have upgraded the kernel to Linux 4.0-rc4

http://projects.goldelico.com/p/gta04-kernel/

I have seen no noteworthy changes introduced by this merge.

But it includes some not-yet-mainline work for the Pyra prototype
support (e.g. BMG160 gyro, mipi-debug panel driver). These improvements
will also help the GTA04A5.

For your reference, I have attached the hw-test result on a GTA04A4. Starts looking good :)

Some of the “nok” are artefacts because the test code is not correct. Some
are real. And telephony sound is not tested at all (because it is still missing).

BR,
Nikolaus


1 Tests-Start ok Mon Mar 16 14:04:36 UTC 2015
2 Tests-Version ok 4.0
3 Tests-Kernel ok 4.0.0-rc4-gta04+ #1016 SMP Mon Mar 16 09:56:58 CET 2015 - recommended minimum: 4.0
4 Tests-Rootfs ok SD
5 Tests-Version-Detected ok 3.14ff - with DT
6 Device-Tree-Model ok Goldelico GTA04A4/Letux 2804 # model from Device Tree
7 LED ok  # enable LEDs
8 BMP085/180 ok 950 mBar, 51 °C # Barometer values
9 ITG3200 ok 53, 7, -12, 46 °C # Gyroscope values
11 BMA180/BMC150 nok , ,  # Accelerometer values
12 HMC5883L ok 1028, 248, 411 # Compass values
14 TSC2007 nok  # Touch screen values
19 OV9655 nok  # Camera device found
20 PVR/SGX nok  # GPU device found
21 TPS61050 nok  # Torch/Flash controller found
22 EEPROM ok  # EEPROM on I2C1 found
23 Si47xx nok Write error: Resource temporarily unavailable init resp: 00 Write 
error: Connection timed out get_chiprev resp: 00 000000486cf3b6d5 Write error: C
onnection timed out powered off # FM TRX
24 TCA6507 ok  # LED controller found
26 Batt-Volt ok 3560 mV # main battery voltage
27 Batt-Status ok Charging # main battery USB charging status
28 Batt-Temp ok 26 °C # main battery temperature (may not be real value if there is no NTC - and if not charging)
29 Batt-Type ok 0 mV # main battery identification
30 Batt-Backup ok 3219 mV # backup battery voltage
31 Batt-Volt-HDQ nok 0 mV # main battery voltage (hdq)
32 Batt-Volt-MADC ok 3560 mV # main battery voltage (calibrated madc)
33 CPU-Memory ok 501200 kB # Memory size (/proc/meminfo)
34 CPU-NAND ok 527958 kB # NAND size (/proc/mtd)
35 CPU-ID ok 47b200029ff800000163810c17020004 # Die-ID stored in u-boot environment
36 CPU-MPUrate ok 800 MHz # mpurate reported by U-Boot
37 U-Boot version ok U-Boot 2011.03-rc1-00967-g671281f-dirty (Feb 09 2015 - 14:33:01) # Version string of U-Boot
38 USB-IP ok 83.151.26.121 # IP access through Ethernet over USB
39 Vibra ok  # running rumble effect demo
40 Sound ok  # enabling sound
can't find TV out display
41 TVout nok  # enabling TVout
can't find TV out display
42 TVout-off nok  # switching back to LCD
43 GTM601-USB ok  # check internal USB port
44 GTM601-Device ok /dev/ttyHS3 # find out application port
45 GTM601-IMEI ok 354154040030840 # IMEI
46 GTM601-SN ok LG3MB1Z008 # Serial Number
47 GTM601-HWV ok 3.0 # Hardware Version
48 GTM601-FWV ok 1.7.4.0 # Firmware Version
49 GTM601-FBT ok Jan  5 2011,11:14:34 # Firmware Build Time
50 GTM601-PMN ok GTM601W_STD # Product Name
51 GTM601-Wakeup ok  # check for 3G Wakeup through AT_ORESET
52 W2SG0004 ok $PSRFTXT,TOW:  0*25 # UART2 and GPS receiver
53 W2CBW003-BT UART ok 3000000 # Bluetooth/WLAN power, UART1, Bluetooth and initial baudrate
54 W2CBW003-BT-BootBaud ok 3000000 # read boot baudrate
55 W2CBW003-BT-MAC ok 00:19:88:1A:56:10 # read MAC address
56 W2CBW003-BT-Scan ok 00:23:12:3D:07:A2 # scan for Bluetooth Base station
57 W2CBW003-WLAN-libertas ok  # check if kernel did load libertas driver
58 W2CBW003-WLAN-IF ok wlan0 # find the interface
59 W2CBW003-WLAN-IFUP ok  # check if ifup works
60 W2CBW003-WLAN-MAC ok 00:19:88:23:f7:e5 # read MAC address
61 W2CBW003-WLAN-Scan ok 00:12:BF:7D:CE:E6 # scan for WLAN Base station
62 W2CBW003-WLAN-IFDOWN ok  # disable WLAN
63 Tests-End nok Mon Mar 16 14:05:42 UTC 2015 # Summary of all tests