[Gta04-owner] Upgrade to GTA04

[Karsten Düsterloh]

Karsten Düsterloh wrote:
> If I understand the UBoot mechnism correctly, partition #1 isn't
> actually needed for booting QTMoko on #2, hence I could put SHR onto a
> repartioned #1?

So I repartioned my SD card to
 partition #1: ext4: SHR
 partition #2: ext4: QTMoko
 partition #3: ext3: Replicant
 partition #1: FAT:  empty
But the UBoot menu won't boot SHR and QTMoko, just Replicant.
(Should booting from ext4 actually work with the kernel preinstalled in
NAND?)

Hence I tried to update the NAND environment as stated in the "Boot the
GTA04 with the new SD card" section on
<http://projects.goldelico.com/p/gta04-rootfs/> (ignoring the SD card
partitioning mentioned there).

But the old ./useful script failed with
> Err http://qtmoko.sourceforge.net  Packages
>   404  Not Found
> Hit http://qtmoko.sourceforge.net  Packages
> Fetched 491 B in 2s (218 B/s)
> W: GPG error: http://qtmoko.sourceforge.net  Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 91B27C1E1DC56A1F
> W: Failed to fetch http://qtmoko.sourceforge.net/debian/gta04/Packages.gz  404  Not Found

Where do I get this key?
Does this way of updating via the preinstalled old script work still at all?

(apt-get upgrade then does fail, too, due to non-authentication of
certain packages.)


Karsten