[Gta04-owner] New stable "Production" image (Debian/LXDE and 3.7 kernel) for NAND flash

[Hermann Schwärzler]

Hi

Dr. H. Nikolaus Schaller schrieb:
[...]
> 9. the screen should turn red and the boot system flash the latest 
> u-boot and boot.scr to NAND (this step is important because UBIFS needs 
> a modified boot.scr)
> 10. the device will boot to LXDE (using the 3.7 kernel on the SD card)
> 11. either connect through RS232 (login: root, passwd: empty), ssh 
> root at 192.168.0.202 over USB (no password) or use the LXDE root terminal 
> + keyboard (if possible since the touch scren may not yet be initialized 
> correctly) to execute these commands (as root):

At this point I was unable to connect using usb-networking. My gta04 did 
not show up as an usb-device. But this is probably just my problem as I 
am using a strange setup right now (Debian wheezy in a Virtualbox on 
Windows XP).

So I used the root LXDE terminal (the touchscreen worked).

> ./flash-nand

After starting LXTerminal the working directory is /, so I had to type

/root/flash-nand

Everything else worked as expected.
Thanks!
Greetings
Hermann

PS: It might be of interest that when I booted a second time to NAND 
(after flashing it with the above command) I was able to access the 
device using usb networking.