[Gta04-owner] GTA04A5 - was 8mW sleep for Beagle Board
neilb at suse.de
Thu Jan 10 23:28:50 CET 2013
On Thu, 10 Jan 2013 23:08:18 +0100 Butrus Damaskus <butrus.butrus at gmail.com>
> On Thu, Jan 10, 2013 at 3:02 PM, Dr. H. Nikolaus Schaller
> <hns at goldelico.com> wrote:
> > Am 10.01.2013 um 14:34 schrieb Butrus Damaskus:
> >> On Thu, Jan 10, 2013 at 1:18 PM, Butrus Damaskus
> >> <butrus.butrus at gmail.com> wrote:
> >>> On Thu, Jan 10, 2013 at 11:03 AM, Flemming Richter Mikkelsen
> >>> <quatrox at gmail.com> wrote:
> >>>> Hmmm...
> >>>> If it should function as a remote control, I believe there is two popular
> >>>> frequencies... so one would need two IR LEDs.
> >>> "Frequencies" is not the problem, you can generate 40kHz or 36kHz as
> >>> you wish. The wavelength might possibly be a problem but most likely
> >>> it would affect the range and still work to some degree...
> >> BTW, this is what I found
> >> :http://www.google.de/url?q=http://www.vishay.com/docs/82606/remote.pdf
> > cool information! The key sentence confirms our idea:
> > "the IrDA TXD port should be a multi- function port, which supports
> > also GPIO (General Purpose Output) and UART"
> > This means we should control uart3_tx as GPIO166.
> Just a question: This GPIO166 doesn't have a timer/PWM connected to it?
Nope. If you have a GTA04 and look in /sys/kernel/debug/omap_mux/
at the file uart3_tx_irtx it contains:
name: uart3_tx_irtx.uart3_tx_irtx (0x480021a0/0x170 = 0x0000), b h21, t NA
mode: OMAP_PIN_OUTPUT | OMAP_MUX_MODE0
signals: uart3_tx_irtx | NA | NA | NA | gpio_166 | NA | NA | safe_mode
So it only has 3 modes: uart3_tx, gpio_166, and nothing (safe_mode).
For a timer, you would need a 'gpt' option.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 828 bytes
Desc: not available
More information about the Gta04-owner