[Gta04-owner] wlan problem
Benjamin Deering
ben_deering at swissmail.org
Tue Feb 19 03:33:05 CET 2013
Hello all,
For the last few weeks, wlan has not worked on my GTA04. I've tried
various images including the hw-validation image and it doesn't seem to
see anything at mmc1. Tonight I installed the newest u-boot image with
the extra wlan tests and clipped some leads from the debug connector to
my old laptop so I could use the serial port.
Here is the result of systest wlan:
GTA04 # systest wlan
activate WiFi/BT reset
power on VAUX4
release WiFi/BT reset
UART1 RTS: 1
UART1 CTS: 1
UART1 TX: 1
UART1 RX: 1
UART2 RTS: 1
UART2 CTS: 0
UART2 TX: 1
UART2 RX: 1
HCI send: 01 02 04
HCI receive: 00
clock 1 --> feedback 0
clock 1 --> feedback 0
clock 1 --> feedback 0
clock 1 --> feedback 0
and here is the result of hw-test on the hw-validation image:
35 VSIM ok # GPS Antenna power
36 W2SG0004 ok $GPGGA,235947.061,,,,,0,00,,,M,0.0,M,,0000*5F # UART2 and
GPS rer
[ 205.587280] twlldo_set_voltage(3150000,3150000)
[ 205.594085] twlldo_set_voltage(3150000,3150000)
[ 207.635986] Bluetooth: HCI UART driver ver 2.2
[ 207.642944] Bluetooth: HCI H4 protocol initialized
[ 207.648040] Bluetooth: HCI BCSP protocol initialized
[ 207.653228] Bluetooth: HCILL protocol initialized
37 W2CBW003-BT/VAUX4 ok 3000000 # Bluetooth/WLAN power, UART1, Bluetooth
and ine
38 W2CBW003-BT-BootBaud ok 3000000 # read boot baudrate
39 W2CBW003-BT-MAC ok 00:19:88:4A:17:BB # read MAC address
40 W2CBW003-BT-Scan nok # scan for Bluetooth Base station
41 W2CBW003-WLAN-libertas nok # check if kernel did load libertas driver
42 W2CBW003-WLAN-IF nok # find the interface
43 W2CBW003-WLAN-VAUX4-off ok # powering down
Are there any things I should try? Is it strange that bluetooth seems
to be working? I haven't tested it beyond hw-validation tests.
Thanks,
Ben
More information about the Gta04-owner
mailing list