[Gta04-owner] WiFi failure?
Gerhard Rieger
gerhard at rieger-priv.org
Fri Apr 19 07:56:45 CEST 2013
Hi Hermann!
On 2013-04-18 21:25, Hermann Schwärzler wrote:
> Hello Gerhard
>
> Gerhard Rieger schrieb:
> [...]
>> Symptoms: in QtMoko v55 when powering on WiFi and scanning the texts
>> "Wireless networks..." and "Searching for wireless networks:" keep
>> blinking, only an old list of APs is displayed. The libertas_sdio and
>> libertas modules are loaded, the wlan0 interface exists, setting it UP
>> with ifconfig or ip does not help.
>>
>> HW-validation image behaves similar, modules are loaded, interface
>> wlan42 exists after running ~/wlan. However I cannot not make it scan
>> successfully (empty result list after 2s). Nothing in kernel logs.
>
> How do you try that scan?
>
> For me
>
> ifconfig wlan0 up
> iwlist wlan0 scan
>
> works in QtMoko.
After shutdown, remove battery and USB cord for a few minutes, then boot
to QtMoko (with or without SIM card):
root at neo:~# ifconfig wlan0 up
root at neo:~# iwlist wlan0 scan
wlan0 No scan results
root at neo:~#
But there are of course many WLANs around.
> What's the output of dmesg?
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.7.0-gta04-qtmoko-v55
(root at qtmoko-buildhost) (gcc version 4.6.3 (Debian 4.6.3-11) ) #1
PREEMPT Fri Mar 22 23:28:25 UTC 2013
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine: GTA04
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 126208
[ 0.000000] free_area_init_node: node 0, pgdat c05f1858, node_mem_map
c0815000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 125184 pages, LIFO batch:31
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 125184
[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=12M
omapfb.vram=0:8M,1:4M omapfb.rotate_type=0
omapfb.mode=dvi:1024x768MR-16 at 60 omapdss.def_disp=lcd
twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 log_buf_len=8M
ignore_loglevel
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 2095648(99%)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 493MB = 493MB total
[ 0.000000] Memory: 483824k/483824k available, 40464k reserved, 0K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0528b44 (5251 kB)
[ 0.000000] .init : 0xc0529000 - 0xc05b0a58 ( 543 kB)
[ 0.000000] .data : 0xc05b2000 - 0xc05f2480 ( 258 kB)
[ 0.000000] .bss : 0xc05f24a4 - 0xc08147f8 (2185 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000244] Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384)
[ 0.045440] pid_max: default: 32768 minimum: 301
[ 0.045593] Mount-cache hash table entries: 512
[ 0.046203] CPU: Testing write buffer coherency: ok
[ 0.046478] Setting up static identity map for 0x803ae718 - 0x803ae770
[ 0.047485] devtmpfs: initialized
[ 0.092651] pinctrl core: initialized pinctrl subsystem
[ 0.093048] regulator-dummy: no parameters
[ 0.093322] NET: Registered protocol family 16
[ 0.094024] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.094329] omap-gpmc omap-gpmc: GPMC revision 5.0
[ 0.096038] OMAP GPIO hardware version 2.5
[ 0.099548] running gta04_init()
[ 0.099548] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.100555] Running gta04_init_rev()
[ 0.100921] gta04_rev 5
[ 0.107727] Reprogramming SDRC clock to 332000000 Hz
[ 0.110656] Revision GTA04A4
[ 0.112243] Found NAND on CS0
[ 0.112274] Registering NAND on CS0
[ 0.112548] find_device_opp: Invalid parameters
[ 0.112579] find_device_opp: Invalid parameters
[ 0.112609] find_device_opp: Invalid parameters
[ 0.112640] find_device_opp: Invalid parameters
[ 0.112701] platform mpu.0: opp_set_availability: Device OPP not
found (-19)
[ 0.112731] gta04_opp_init: failed to enable higher opp -19
[ 0.112731] platform mpu.0: opp_set_availability: Device OPP not
found (-19)
[ 0.112762] gta04_init done...
[ 0.112792] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.116180] OMAP DMA hardware revision 5.0
[ 0.121551] bio: create slab <bio-0> at 0
[ 0.134979] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
[ 0.135650] SCSI subsystem initialized
[ 0.135833] usbcore: registered new interface driver usbfs
[ 0.135925] usbcore: registered new interface driver hub
[ 0.136108] usbcore: registered new device driver usb
[ 0.136291] musb-omap2430 musb-omap2430: invalid resource
[ 0.143341] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
[ 0.143432] twl 1-0048: power (irq 343) chaining IRQs 346..353
[ 0.144317] VUSB1V5: override min_uV, 1 -> 1500000
[ 0.144317] VUSB1V5: override max_uV, 2147483647 -> 1500000
[ 0.144348] VUSB1V5: 1500 mV normal standby
[ 0.144744] VUSB1V8: override min_uV, 1 -> 1800000
[ 0.144775] VUSB1V8: override max_uV, 2147483647 -> 1800000
[ 0.144775] VUSB1V8: 1800 mV normal standby
[ 0.145141] VUSB3V1: override min_uV, 1 -> 3100000
[ 0.145141] VUSB3V1: override max_uV, 2147483647 -> 3100000
[ 0.145172] VUSB3V1: 3100 mV normal standby
[ 0.148864] musb-omap2430 musb-omap2430: musb core is not yet ready
[ 0.148895] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.149566] VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.150054] VDAC: 1800 mV normal standby
[ 0.150756] VAUX2: 2800 mV normal
[ 0.151184] VDVI: 1800 mV normal standby
[ 0.151916] VSIM: 2800 mV normal standby
[ 0.152526] VAUX1: 2500 <--> 3000 mV at 3000 mV normal standby
[ 0.152984] VAUX3: 2500 mV normal standby
[ 0.153564] VAUX4: 2800 <--> 3150 mV at 2800 mV normal standby
[ 0.153930] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[ 0.154846] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
[ 0.155242] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[ 0.155731] Advanced Linux Sound Architecture Driver Initialized.
[ 0.156799] Switching to clocksource 32k_counter
[ 0.167755] NET: Registered protocol family 2
[ 0.168426] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.168792] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.168975] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.169067] TCP: reno registered
[ 0.169067] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.169097] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.169342] NET: Registered protocol family 1
[ 0.169647] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed
error:-22
[ 0.173950] omap_dsp_init: 600000 bytes @ 9ee00000
[ 0.177276] msgmni has been set to 944
[ 0.178833] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.178833] io scheduler noop registered
[ 0.178863] io scheduler deadline registered
[ 0.178863] io scheduler cfq registered (default)
[ 0.181304] OMAP DSS rev 2.0
[ 0.204895] td028ttec1_panel_probe()
[ 0.204895] jbt_reg_init()
[ 0.281372] did jbt_reg_init()
[ 0.282958] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88) is a
OMAP UART0
[ 0.283233] GPS SET to 0
[ 0.283477] GPS SET to 0
[ 0.283508] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89) is a
OMAP UART1
[ 0.283996] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90) is a
OMAP UART2
[ 1.011505] console [ttyO2] enabled
[ 1.028991] brd: module loaded
[ 1.037139] loop: module loaded
[ 1.043365] bmp085 2-0077: Successfully initialized bmp085!
[ 1.052917] twl4030_madc twl4030_madc: clk disabled, enabling
[ 1.061798] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron
NAND 512MiB 1,8V 16-bit), page size: 2048, OOB size: 64
[ 1.074798] Creating 5 MTD partitions on "omap2-nand.0":
[ 1.080627] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.088409] 0x000000080000-0x000000260000 : "U-Boot"
[ 1.096832] 0x000000260000-0x000000280000 : "U-Boot Env"
[ 1.104125] 0x000000280000-0x000000680000 : "Kernel"
[ 1.114715] 0x000000680000-0x000020000000 : "File System"
[ 1.180633] GPS down
[ 1.196014] GPS up
[ 1.211639] GPS idle
[ 1.527496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.534667] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1.540924] ehci-omap ehci-omap.0: new USB bus registered, assigned
bus number 1
[ 2.586883] ehci-omap ehci-omap.0: irq 93, io mem 0x48064800
[ 2.602569] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.608673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.615875] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.623504] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.629150] usb usb1: Manufacturer: Linux 3.7.0-gta04-qtmoko-v55 ehci_hcd
[ 2.636322] usb usb1: SerialNumber: ehci-omap.0
[ 2.641815] hub 1-0:1.0: USB hub found
[ 2.645751] hub 1-0:1.0: 3 ports detected
[ 2.650451] Initializing USB Mass Storage driver...
[ 2.655670] usbcore: registered new interface driver usb-storage
[ 2.662048] USB Mass Storage support registered.
[ 0.915130]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[ 2.667083] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)<7>[
2.673553] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk
combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.684631] musb-hdrc: MHDRC RTL version 1.800
[ 2.689453] musb-hdrc: setup fifo_mode 4
[ 2.693572] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.700775] mousedev: PS/2 mouse device common for all mice
[ 2.706878] tsc2007_init()
[ 2.710205] input: TSC2007 Touchscreen as /devices/virtual/input/input0
[ 2.741088] input: bma150 as
/devices/platform/omap_i2c.2/i2c-2/2-0041/input/input1
[ 2.750000] input: twl4030_pwrbutton as
/devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
[ 2.761444] input: twl4030:vibrator as
/devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030-audio/input/input3
[ 2.773345] twl_rtc twl_rtc: Enabling TWL-RTC
[ 2.782714] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.790374] i2c /dev entries driver
[ 2.794525] Driver for 1-wire Dallas network protocol.
[ 2.800231] omap_hdq omap_hdq: OMAP HDQ Hardware Rev 0.5. Driver in
Interrupt mode
[ 3.001464] APM Battery Driver
[ 3.036193] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout
60 sec
[ 3.044525] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 3.051208] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 3.058074] omap_cpufreq_init: unable to get MPU regulator
[ 3.064056] cpu cpu0: opp_init_cpufreq_table: Device OPP not found (-19)
[ 3.071197] cpu cpu0: omap_cpu_init: cpu0: failed creating freq
table[-19]
[ 3.078521] cpuidle: using governor ladder
[ 3.082946] cpuidle: using governor menu
[ 3.087402] sdhci: Secure Digital Host Controller Interface driver
[ 3.093994] sdhci: Copyright(c) Pierre Ossman
[ 3.099487] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
[ 3.105865] omap-dma-engine omap-dma-engine: allocating channel for 62
[ 3.112792] omap-dma-engine omap-dma-engine: allocating channel for 61
[ 3.250091] bq27000-battery bq27000-battery: support ver. 1.2.0 enabled
[ 3.493286] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.499359] Registered led device: gta04:red:aux
[ 3.504638] Registered led device: gta04:green:aux
[ 3.509887] Registered led device: gta04:red:power
[ 3.515899] Registered led device: gta04:green:power
[ 3.523284] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
[ 3.529663] omap-dma-engine omap-dma-engine: allocating channel for 48
[ 3.536621] omap-dma-engine omap-dma-engine: allocating channel for 47
[ 3.594940] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.601928] usbcore: registered new interface driver usbhid
[ 3.607910] usbhid: USB HID core driver
[ 3.720397] mmc0: host does not support reading read-only switch.
assuming write-enable.
[ 3.732086] mmc0: new high speed SDHC card at address e624
[ 3.738311] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 3.747161] omap_i2c omap_i2c.3: Arbitration lost
[ 3.753570] mmcblk0: p1 p2 p3 p4 < p5 >
[ 3.791412] mmc1: new SDIO card at address 0001
[ 4.797851] omap_i2c omap_i2c.3: timeout waiting for bus ready
[ 4.805267] hmc5883 initialized
[ 5.821289] omap_i2c omap_i2c.3: timeout waiting for bus ready
[ 5.828338] usbcore: registered new interface driver snd-usb-audio
[ 5.836334] GTA04 OMAP3 SoC snd init
[ 5.840301] soc-audio soc-audio.0: ASoC machine gta04 should use
snd_soc_register_card()
[ 5.934722] TPS Voice IF is tristated
[ 5.944152] soc-audio soc-audio.0: twl4030-hifi <-> omap-mcbsp.2
mapping ok
[ 5.952728] input: gta04 Headset Jack as
/devices/platform/soc-audio.0/sound/card0/input4
[ 5.962036] gta04-voice SoC init
[ 5.965576] soc-audio soc-audio.1: ASoC machine gta04-voice should
use snd_soc_register_card()
[ 5.975524] soc-audio soc-audio.1: GTM601 <-> omap-mcbsp.4 mapping ok
[ 5.983428] gta04-headset SoC init
[ 5.987213] soc-audio soc-audio.2: ASoC machine gta04-headset should
use snd_soc_register_card()
[ 5.997344] soc-audio soc-audio.2: W2CBW003 <-> omap-mcbsp.3 mapping ok
[ 6.005340] oprofile: hardware counters not available
[ 6.010711] oprofile: using timer interrupt.
[ 6.015563] TCP: cubic registered
[ 6.019134] NET: Registered protocol family 17
[ 6.023895] NET: Registered protocol family 15
[ 6.028625] lib80211: common routines for IEEE802.11 drivers
[ 6.034637] lib80211_crypt: registered algorithm 'NULL'
[ 6.041229] rfkill-regulator rfkill-regulator.0: GPS initialized
[ 6.047943] Key type dns_resolver registered
[ 6.052581] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 6.063079] omap2_set_init_voltage: unable to find boot up OPP for
vdd_mpu_iva
[ 6.070739] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 6.078704] ThumbEE CPU extension supported.
[ 6.083312] SmartReflex Class3 initialized
[ 6.087768] clock: disabling unused clocks to save power
[ 6.094177] registered taskstats version 1
[ 6.098754] omapfb omapfb: cannot parse default modes
[ 6.113525] Console: switching to colour frame buffer device 60x40
[ 6.127349] td028ttec1_panel_enable()
[ 6.131134] gta04_enable_lcd()
[ 6.134552] pwm-backlight pwm-backlight: unable to request PWM,
trying legacy API
[ 6.160614] td028ttec1_panel_resume()
[ 6.457244] gta04_enable_lcd()
[ 6.462158] VAUX3: disabling
[ 6.468414] VDAC: disabling
[ 6.475738] input: Phone button as
/devices/platform/gpio-keys.0/input/input5
[ 6.484130] input: 3G Wakeup as
/devices/platform/gpio-keys.1/input/input6
[ 6.492858] twl_rtc twl_rtc: setting system clock to 2013-04-19
05:40:40 UTC (1366350040)
[ 6.501556] sr_init: No PMIC hook to init smartreflex
[ 6.506988] smartreflex smartreflex.0: omap_sr_probe: SmartReflex
driver initialized
[ 6.515350] smartreflex smartreflex.1: omap_sr_probe: SmartReflex
driver initialized
[ 6.523803] ALSA device list:
[ 6.527008] #0: gta04
[ 6.529541] #1: gta04-voice
[ 6.532745] #2: gta04-headset
[ 6.537109] Freeing init memory: 540K
[ 6.594879] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 8.027526] udevd[178]: starting version 175
[ 9.007446] cfg80211: Calling CRDA to update world regulatory domain
[ 9.103759] libertas_sdio: Libertas SDIO driver
[ 9.141967] libertas_sdio: Copyright Pierre Ossman
[ 11.807983] libertas_sdio mmc1:0001:1 (unregistered net_device):
00:19:88:23:f8:92, fw 9.70.7p0, cap 0x00000303
[ 11.877288] libertas_sdio mmc1:0001:1 (unregistered net_device):
PREP_CMD: command 0x00a3 failed: 2
[ 11.892181] libertas_sdio mmc1:0001:1 wlan0: Marvell WLAN 802.11 adapter
[ 13.118652] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 13.460998] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 13.925750] gadget: using random self ethernet address
[ 13.931365] gadget: using random host ethernet address
[ 13.940856] usb0: MAC c6:86:c4:07:39:4f
[ 13.944976] usb0: HOST MAC 56:7f:77:5c:f4:d8
[ 13.950744] gadget: Ethernet Gadget, version: Memorial Day 2008
[ 13.965545] gadget: g_ether ready
[ 13.975494] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 13.989776] musb-hdrc musb-hdrc.0: new USB bus registered, assigned
bus number 2
[ 14.016662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.023834] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 14.039947] usb usb2: Product: MUSB HDRC host driver
[ 14.045104] usb usb2: Manufacturer: Linux 3.7.0-gta04-qtmoko-v55 musb-hcd
[ 14.071197] usb usb2: SerialNumber: musb-hdrc.0
[ 14.083984] hub 2-0:1.0: USB hub found
[ 14.102508] hub 2-0:1.0: 1 port detected
[ 14.226898] hso: drivers/net/usb/hso.c: Option Wireless
[ 14.234008] usbcore: registered new interface driver hso
[ 14.667755] gadget: high-speed config #1: CDC Ethernet (ECM)
[ 17.903503] EXT4-fs (mmcblk0p5): warning: maximal mount count
reached, running e2fsck is recommended
[ 17.917205] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data
mode. Opts: (null)
[ 19.773529] NET: Registered protocol family 10
[ 21.543701] Bluetooth: Core ver 2.16
[ 21.549285] NET: Registered protocol family 31
[ 21.553924] Bluetooth: HCI device and connection manager initialized
[ 21.560699] Bluetooth: HCI socket layer initialized
[ 21.565917] Bluetooth: L2CAP socket layer initialized
[ 21.571289] Bluetooth: SCO socket layer initialized
[ 21.584655] Bluetooth: HCI UART driver ver 2.2
[ 21.589813] Bluetooth: HCI H4 protocol initialized
[ 21.596527] Bluetooth: HCI BCSP protocol initialized
[ 21.602752] Bluetooth: HCILL protocol initialized
[ 21.655395] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.672149] Bluetooth: BNEP filters: protocol multicast
[ 21.685333] Bluetooth: BNEP socket layer initialized
[ 21.707366] Bluetooth: RFCOMM TTY layer initialized
[ 21.716857] Bluetooth: RFCOMM socket layer initialized
[ 21.722381] Bluetooth: RFCOMM ver 1.11
[ 23.468688] omap-dma-engine omap-dma-engine: allocating channel for 33
[ 23.873962] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 23.943176] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.657104] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 25.824340] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
[ 25.831451] usb 1-2: New USB device strings: Mfr=3, Product=2,
SerialNumber=0
[ 25.839111] usb 1-2: Product: Globetrotter HSUPA Modem
[ 25.844573] usb 1-2: Manufacturer: Option N.V.
[ 28.565032] omap-dma-engine omap-dma-engine: freeing channel for 33
[ 29.849731] qpe (1885): /proc/1885/oom_adj is deprecated, please use
/proc/1885/oom_score_adj instead.
[ 75.977813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> Greetings
> Hermann
Thank you
Gerhard
More information about the Gta04-owner
mailing list