[Gta04-owner] [QtMoko] Wifi

Tue Apr 9 21:57:23 CEST 2013

On Tue, Apr 9, 2013 at 7:00 PM, Flemming Richter Mikkelsen
<quatrox at gmail.com> wrote:
> On Tue, Apr 9, 2013 at 6:49 PM, Dr. H. Nikolaus Schaller
> <hns at goldelico.com> wrote:
> --cut--
>> Hi,
>> what does the hw-test report as the mpurate?
>
> As posted a few mails ago:
> 26 CPU-MPUrate ok 1000 MHz # mpurate reported by U-Boot
>
>>
>> We just found out that the 3.7 kernel might have problems switching
>> the DM3730CBP to 1 GHz leading to strange effects with the latest
>> hw-validation image. For 800 MHz CPUs it appears to work fine.
>>
>> So please try again with the old 2.6.32 image (on SD):
>>
>> <http://download.goldelico.com/gta04/20121212-GTA04-Production/>
>
> Thank you for the hint.
> I will try this and report back.

I just generated the SD card, inserted it and powered up.
The output below shows the same as the output from the latest stable
HW validation.  Below that is a more interesting part from dmesg.  The
complete dmesg log is attached.

gta04:~# ./hw-test
1 Tests-Start ok Tue Apr  9 19:46:58 UTC 2013
2 Tests-Version ok 2.7
3 LED ok  # enable LEDs
4 VAUX2 ok  # Sensor power
5 BMP085 ok 991 mBar, 29 C # Barometer values
6 ITG3200 ok 18, 22, -47, 25 C # Gyroscope values
7 BMA180 ok 77, -180, 4500 # Accelerometer values
8 HMC5883L ok 492, 395, 552 # Compass values
9 TSC2007 ok 0 0 0 0 306 0 0 1327 1596 106 65535 # Touch screen values
10 OV9655 nok  # Camera driver
11 TPS61050 ok  # Torch/Flash I2C response
12 M24LR64 ok  # RFID-EEPROM I2C response
13 Si47xx ok  # FM TRX I2C response
14 TCA6507 ok  # LED controller I2C response
15 Batt-Volt ok 4215 mV # main battery voltage
16 Batt-Status ok Charging # main battery status
17 Batt-Temp ok 29 C # main battery temperature (may not be real value)
18 Batt-Backup ok 2050 mV # backup battery voltage
19 CPU-Memory ok 500624 kB # Memory size (/proc/meminfo)
20 CPU-NAND ok 1066926 kB # NAND size (/proc/mtd)
21 CPU-ID ok 2c4e00029ff8000001683b050a020029 # Die ID
22 CPU-MPUrate ok 1000 MHz # mpurate reported by U-Boot
23 USB-IP ok 83.151.26.121 # IP access through Ethernet over USB
24 Sound ok  # enabling sound
25 TVout ok  # enabling TVout
26 GTM601-USB ok  # check internal USB port
27 GTM601-Device ok /dev/ttyHS3 # find out application port
28 GTM601-IMEI ok 354154040030774 # IMEI
29 GTM601-SN ok LG3MB1Z011 # Serial Number
30 GTM601-HWV ok 3.0 # Hardware Version
31 GTM601-FWV ok 1.7.4.0 # Firmware Version
32 GTM601-FBT ok Jan  5 2011,11:14:34 # Firmware Build Time
33 GTM601-PMN ok GTM601W_STD # Product Name
34 GTM601-Wakeup ok  # check for 3G Wakeup through AT_ORESET
35 VSIM ok  # GPS Antenna power
36 W2SG0004 ok $GPGGA,235947.061,,,,,0,00,,,M,0.0,M,,0000*5F # UART2
and GPS receiver
37 W2CBW003-BT/VAUX4 ok 3000000 # Bluetooth/WLAN power, UART1,
Bluetooth and initial baudrate
38 W2CBW003-BT-BootBaud ok 3000000 # read boot baudrate
39 W2CBW003-BT-MAC ok 00:19:88:1A:56:C1 # read MAC address
40 W2CBW003-BT-Scan nok  # scan for Bluetooth Base station
41 W2CBW003-WLAN-libertas ok  # check if kernel did load libertas driver
42 W2CBW003-WLAN-IF nok  # find the interface
43 W2CBW003-WLAN-VAUX4-off ok  # powering down
44 TVout-off ok  # switching back to LCD
45 Tests-End nok Tue Apr  9 19:48:28 UTC 2013 # Summary of all tests
gta04:~#

[  150.925750] mmc1: new SDIO card at address 0001
[  150.932739] bus: 'mmc': driver_probe_device: matched device
mmc1:0001 with driver mmcblk
[  150.932769] bus: 'mmc': really_probe: probing driver mmcblk with
device mmc1:0001
[  151.029418] cfg80211: Using static regulatory domain info
[  151.035095] cfg80211: Regulatory domain: 00
[  151.047241]     (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[  151.055145]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  151.062561]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[  151.069915]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[  151.078491]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  151.085937]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[  151.094451] cfg80211: Calling CRDA to update world regulatory domain
[  151.157318] libertas_sdio: Libertas SDIO driver
[  151.162139] libertas_sdio: Copyright Pierre Ossman
[  151.167175] bus: 'sdio': driver_probe_device: matched device
mmc1:0001:1 with driver libertas_sdio
[  151.167175] bus: 'sdio': really_probe: probing driver libertas_sdio
with device mmc1:0001:1
[  151.167938] libertas_sdio mmc1:0001:1: firmware: requesting sd8686_helper.bin
[  151.214599] Spurious DMA IRQ
[  151.217742] libertas: failed to load helper firmware
[  151.223327] libertas_sdio: probe of mmc1:0001:1 failed with error -110
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg.log
Type: application/octet-stream
Size: 62913 bytes
Desc: not available
URL: <http://lists.goldelico.com/pipermail/gta04-owner/attachments/20130409/bdd33cb7/attachment-0001.obj>