[Gta04-owner] [QtMoko] Problem booting on GTA02

"Benedikt Bär | Relamp.tk" beniwtv at relamp.tk
Wed Oct 17 14:26:38 CEST 2012


On 10/16/2012 11:49 AM, "Benedikt Bär | Relamp.tk" wrote:
> On 10/16/2012 11:33 AM, "Benedikt Bär | Relamp.tk" wrote:
>> Hi,
>>
>> This is the output:
>>
>> NeoKbdDriverPlugin:create()
>> Before call NeoKbdHandler()
>> 56223 0
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> 0
>> QDBusObjectPath: invalid path ""
>> Method call  "/->DefaultAdapter()"  failed: 
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
>> Segmentation fault
>>
>> Then the same repeats over and over again...
>> Seems it is segfaulting somewhere.
>>
>> Thanks,
>> Ben
>>
>> On 10/16/2012 11:20 AM, Gilles Filippini wrote:
>>> Hi,
>>>
>>> ----- Mail original -----
>>>> De: "Benedikt Bär | Relamp.tk" <beniwtv at relamp.tk>
>>>>
>>>> I recently installed QtMoko v48 on my Freerunner (in NAND), but it
>>>> does
>>>> not seem to boot.
>>>>
>>>> The first time I booted it went OK, there was a calibration and time
>>>> settings screen. When I finished, it seemed to restart QtExtended and
>>>> there the problems began.
>>>>
>>>> I now get to a screen with the white clock displaying, but then it
>>>> appears to crash and the blinking cursor appears again. Then the
>>>> white
>>>> clock appears again and the same process starts over.
>>>>
>>>> I have left it a few minutes doing this, but it does not boot.
>>>>
>>>> Any ideas on how to debug this?
>>>  From what I understand the Freerunner does boot but QtMoko fails to 
>>> launch. You can try to SSH into the FreeRunner, and from there :
>>> 1- stop the qtmoko service
>>> # invoke-rc.d qtmoko-neo stop
>>>
>>> 2- launch it by hand
>>> # . /opt/qtmoko/qpe.env
>>> # /opt/qtmoko/qpe.sh
>>>
>>> 3- Watch the messages in the console.
>>>
>>> Thanks,
>>>
>>> _g.
>
> Hi again,
>
> So I did a /etc/init.d/bluetooth stop and now QtMoko starts...
>
> I tried enabling the bluetooth chip manually, (via 
> http://wiki.openmoko.org/wiki/Manually_using_Bluetooth), but it seems 
> the chip doesn't power up.
>
> Investigating that now...
>
> Ben

Well after further testing it seems my BT chip is not working anymore :(.

Will have to wait for my GTA04 to arrive then.

Thanks to all,
Ben

>
>>> _______________________________________________
>>> Gta04-owner mailing list
>>> Gta04-owner at goldelico.com
>>> http://lists.goldelico.com/mailman/listinfo/gta04-owner
>>
>> _______________________________________________
>> Gta04-owner mailing list
>> Gta04-owner at goldelico.com
>> http://lists.goldelico.com/mailman/listinfo/gta04-owner
>
> _______________________________________________
> Gta04-owner mailing list
> Gta04-owner at goldelico.com
> http://lists.goldelico.com/mailman/listinfo/gta04-owner



More information about the Gta04-owner mailing list