[Gta04-owner] [QtMoko] Problem booting on GTA02

"Benedikt Bär | Relamp.tk" beniwtv at relamp.tk
Tue Oct 16 11:33:57 CEST 2012


Hi,

This is the output:

NeoKbdDriverPlugin:create()
Before call NeoKbdHandler()
56223 0
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
0
QDBusObjectPath: invalid path ""
Method call  "/->DefaultAdapter()"  failed: 
QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
Segmentation fault

Then the same repeats over and over again...
Seems it is segfaulting somewhere.

Thanks,
Ben

On 10/16/2012 11:20 AM, Gilles Filippini wrote:
> Hi,
>
> ----- Mail original -----
>> De: "Benedikt Bär | Relamp.tk" <beniwtv at relamp.tk>
>>
>> I recently installed QtMoko v48 on my Freerunner (in NAND), but it
>> does
>> not seem to boot.
>>
>> The first time I booted it went OK, there was a calibration and time
>> settings screen. When I finished, it seemed to restart QtExtended and
>> there the problems began.
>>
>> I now get to a screen with the white clock displaying, but then it
>> appears to crash and the blinking cursor appears again. Then the
>> white
>> clock appears again and the same process starts over.
>>
>> I have left it a few minutes doing this, but it does not boot.
>>
>> Any ideas on how to debug this?
>  From what I understand the Freerunner does boot but QtMoko fails to launch. You can try to SSH into the FreeRunner, and from there :
> 1- stop the qtmoko service
> # invoke-rc.d qtmoko-neo stop
>
> 2- launch it by hand
> # . /opt/qtmoko/qpe.env
> # /opt/qtmoko/qpe.sh
>
> 3- Watch the messages in the console.
>
> Thanks,
>
> _g.
> _______________________________________________
> Gta04-owner mailing list
> Gta04-owner at goldelico.com
> http://lists.goldelico.com/mailman/listinfo/gta04-owner



More information about the Gta04-owner mailing list